i followed a couple of tutorials on the web for setting up the freeradius server on windows(7).
i can connect with the AP, and i see that the RADIUS is acces-REJECT every attempt i made.
i configured a couple of clients but no luck.
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.2.245:2052, id=4, length=177
User-Name = "bob"
NAS-IP-Address = 192.168.2.245
NAS-Port = 0
Called-Station-Id = "C4-64-13-0C-2D-3F:ciscosboeler"
Calling-Station-Id = "00-1F-3B-B2-F5-09"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11"
EAP-Message = 0x0205001119800000000715030100020230
State = 0x548893238d27ece11880dca12aeac968
Message-Authenticator = 0x28f1188edd091a3de53af1afb35fca26
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
modcall[authorize]: module "preprocess" returns ok for request 4
radius_xlat: '../var/log/radius/radacct/192.168.2.245/auth-detail-20140507.log'
rlm_detail: ../var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d.lo
g expands to ../var/log/radius/radacct/192.168.2.245/auth-detail-20140507.log
modcall[authorize]: module "auth_log" returns ok for request 4
modcall[authorize]: module "chap" returns noop for request 4
modcall[authorize]: module "mschap" returns noop for request 4
rlm_realm: No '@' in User-Name = "bob", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 4
rlm_eap: EAP packet type response id 5 length 17
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 4
users: Matched entry bob at line 85
modcall[authorize]: module "files" returns ok for request 4
rlm_pap: Found existing Auth-Type, not changing it.
modcall[authorize]: module "pap" returns noop for request 4
modcall: leaving group authorize (returns updated) for request 4
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
rlm_eap_tls: <<< TLS 1.0 Alert [length 0002], fatal unknown_ca
TLS Alert read:fatal:unknown CA
TLS_accept:failed in SSLv3 read client certificate A
rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unkno
wn ca
rlm_eap_tls: SSL_read failed inside of TLS (-1), TLS session fails.
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
rlm_eap: Freeing handler
modcall[authenticate]: module "eap" returns reject for request 4
modcall: leaving group authenticate (returns reject) for request 4
auth: Failed to validate the user.
Login incorrect: [bob/<no User-Password attribute>] (from client testing123 port
0 cli 00-1F-3B-B2-F5-09)
Delaying request 4 for 1 seconds
Finished request 4
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.2.245:2052, id=4, length=177
Sending Access-Reject of id 4 to 192.168.2.245 port 2052
EAP-Message = 0x04050004
Message-Authenticator = 0x00000000000000000000000000000000
--- Walking the entire request list ---
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 0 with timestamp 536a397b
Cleaning up request 1 ID 1 with timestamp 536a397b
Cleaning up request 2 ID 2 with timestamp 536a397b
Cleaning up request 3 ID 3 with timestamp 536a397b
Cleaning up request 4 ID 4 with timestamp 536a397b
Nothing to do. Sleeping until we see a request.