hello all,

My version of freeradius is Version 2.1.0

here is my result in debug mode:

rad_recv: Access-Request packet from host 192.168.20.253 port 1645, id=112, length=131
    User-Name = "linatest"
    Service-Type = Framed-User
    Framed-MTU = 1500
    Called-Station-Id = "00-1A-A1-64-BB-1A"
    Calling-Station-Id = "00-18-8B-B5-26-B7"
    EAP-Message = 0x0202000d016c696e6174657374
    Message-Authenticator = 0x3fe6e297218c3aa1e98286a5a3db3303
    NAS-Port = 50024
    NAS-Port-Type = Ethernet
    NAS-IP-Address = 192.168.20.253
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
[files] users: Matched entry linatest at line 11
++[files] returns ok
WARNING: Please update your configuration, and remove 'Auth-Type = Local'
WARNING: Use the PAP or CHAP modules instead.
No User-Password or CHAP-Password attribute in the request.
Cannot perform authentication.
Failed to authenticate the user.
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 112 to 192.168.20.253 port 1645
    Service-Type = Framed-User
Waking up in 4.9 seconds.
Cleaning up request 0 ID 112 with timestamp +20


i don't have 'Auth-Type = Local' but it still remaining me this
And :
No User-Password or CHAP-Password attribute in the request.
Cannot perform authentication.
Failed to authenticate the user.

where to put this CHAP-Password attribute in the request??

here is my users file

linatest        Cleartext-Password := "mypass"
                Service-Type = Framed-User



thanks for your help