FreeRADIUS Version 3.0.15
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /opt/freeradius-server-3.0.15/share/freeradius/dictionary
including dictionary file /opt/freeradius-server-3.0.15/share/freeradius/dictionary.dhcp
including dictionary file /opt/freeradius-server-3.0.15/share/freeradius/dictionary.vqp
including dictionary file /opt/freeradius-server-3.0.15/etc/raddb/dictionary
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/radiusd.conf
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/proxy.conf
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/clients.conf
including files in directory /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/replicate
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/unix
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/expiration
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/pap
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/digest
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/echo
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/utf8
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/eap
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/exec
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/unpack
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/files
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/soh
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/dhcp
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/linelog
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/passwd
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/cache_eap
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/preprocess
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/expr
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/sradutmp
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/logintime
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/f_ticks
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/radutmp
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/dynamic_clients
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/ntlm_auth
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/date
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/mschap
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/chap
including files in directory /opt/freeradius-server-3.0.15/etc/raddb/policy.d/
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/policy.d/cui
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/policy.d/debug
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/policy.d/eap
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/policy.d/dhcp
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/policy.d/accounting
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/policy.d/canonicalization
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/policy.d/filter
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/policy.d/abfab-tr
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/policy.d/operator-name
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/policy.d/control
including files in directory /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/eduroam
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/inner-tunnel
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
including configuration file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/../eduroam-realm-checks.conf
main {
 security {
 	allow_core_dumps = no
 }
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
}
main {
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	sbindir = "/usr/sbin"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
	libdir = "/usr/lib/freeradius"
	radacctdir = "/var/log/freeradius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 16384
	pidfile = "/var/run/freeradius/freeradius.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
 	stripped_names = no
 	auth = no
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
 	max_attributes = 200
 	reject_delay = 1.000000
 	status_server = yes
 	allow_vulnerable_openssl = "yes"
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
 	retry_delay = 5
 	retry_count = 3
 	default_fallback = no
 	dead_time = 120
 	wake_all_if_all_dead = no
 }
 home_server localhost {
 	ipaddr = 127.0.0.1
 	port = 1812
 	type = "auth"
 	secret = <<< secret >>>
 	response_window = 20.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 120
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
 }
 home_server tls {
 	ipaddr = 127.0.0.1
 	port = 2083
 	type = "auth"
 	proto = "tcp"
 	secret = <<< secret >>>
 	response_window = 30.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "none"
 	ping_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 300
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
 }
  tls {
  	verify_depth = 0
  	pem_file_type = yes
  	private_key_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/server-myifam.key"
  	certificate_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/server-myifam.pem"
  	ca_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/tls-ca-bundle.pem"
  	dh_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/dh"
  	random_file = "/dev/urandom"
  	fragment_size = 1024
  	include_length = yes
  	check_crl = no
  	cipher_list = "DEFAULT"
  	ecdh_curve = "prime256v1"
  }
 home_server idp.myifam.upm.my {
 	ipaddr = 119.40.121.24
 	port = 2083
 	type = "auth"
 	proto = "tcp"
 	secret = <<< secret >>>
 	response_window = 30.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "none"
 	ping_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 300
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
 }
  tls {
  	verify_depth = 0
  	pem_file_type = yes
  	private_key_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/server-myifam.key"
  	certificate_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/server-myifam.pem"
  	ca_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/tls-ca-bundle.pem"
  	dh_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/dh"
  	random_file = "/dev/urandom"
  	fragment_size = 1024
  	include_length = yes
  	check_crl = no
  	cipher_list = "DEFAULT"
  	ecdh_curve = "prime256v1"
  }
 home_server eduroam-idp.perdanauniversity.edu.my {
 	ipaddr = 122.0.23.57
 	port = 2083
 	type = "auth"
 	proto = "tcp"
 	secret = <<< secret >>>
 	response_window = 30.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "none"
 	ping_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 300
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
 }
  tls {
  	verify_depth = 0
  	pem_file_type = yes
  	private_key_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/server-myifam.key"
  	certificate_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/server-myifam.pem"
  	ca_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/tls-ca-bundle.pem"
  	dh_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/dh"
  	random_file = "/dev/urandom"
  	fragment_size = 1024
  	include_length = yes
  	check_crl = no
  	cipher_list = "DEFAULT"
  	ecdh_curve = "prime256v1"
  }
 realm LOCAL {
 }
 realm NULL {
 }
 realm eduroam.my {
	authhost = LOCAL
	accthost = LOCAL
 }
 home_server_pool tls {
	type = fail-over
	home_server = tls
 }
 realm tls {
	auth_pool = tls
 }
 home_server_pool myifam.upm.my {
	type = fail-over
	home_server = idp.myifam.upm.my
 }
 realm myifam.upm.my {
	auth_pool = myifam.upm.my
	nostrip
 }
 home_server_pool perdanauniversity.edu.my {
	type = fail-over
	home_server = eduroam-idp.perdanauniversity.edu.my
 }
 realm perdanauniversity.edu.my {
	auth_pool = perdanauniversity.edu.my
	nostrip
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
radiusd: #### Loading Clients ####
 client localhost {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	nas_type = "other"
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client idp.myifam.upm.my {
 	ipaddr = 119.40.121.24
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	shortname = "idp.myifam.upm.my"
 	nas_type = "other"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client farhan-proline {
 	ipaddr = 175.139.225.78
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	shortname = "farhan-proline"
 	nas_type = "other"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Autz-Type = Status-Server
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_always
  # Loading module "reject" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "fail" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "ok" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "handled" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "invalid" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  always invalid {
  	rcode = "invalid"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "userlock" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  always userlock {
  	rcode = "userlock"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "notfound" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "noop" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "updated" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/unix
  unix {
  	radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_detail
  # Loading module "detail" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail
  detail {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/pap
  pap {
  	normalise = yes
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/digest
  # Loaded module rlm_exec
  # Loading module "echo" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/utf8
  # Loaded module rlm_eap
  # Loading module "eap" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/eap
  eap {
  	default_eap_type = "peap"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	cisco_accounting_username_bug = no
  	max_sessions = 2048
  }
  # Loading module "exec" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_files
  # Loading module "files" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/files
  files {
  	filename = "/opt/freeradius-server-3.0.15/etc/raddb/mods-config/files/authorize"
  	acctusersfile = "/opt/freeradius-server-3.0.15/etc/raddb/mods-config/files/accounting"
  	preproxy_usersfile = "/opt/freeradius-server-3.0.15/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loaded module rlm_dhcp
  # Loading module "dhcp" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/linelog
  linelog {
  	filename = "/var/log/freeradius/linelog"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = "This is a log message for %{User-Name}"
  	reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  	filename = "/var/log/freeradius/linelog-accounting"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = ""
  	reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loading module "auth_log" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
  detail auth_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "reply_log" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
  detail reply_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  	filename = "/etc/passwd"
  	format = "*User-Name:Crypt-Password:"
  	delimiter = ":"
  	ignore_nislike = no
  	ignore_empty = yes
  	allow_multiple_keys = no
  	hash_size = 100
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  	driver = "rlm_cache_rbtree"
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 0
  	epoch = 0
  	add_stats = no
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "suffix" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "realmpercent" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "ntdomain" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\\"
  	ignore_default = no
  	ignore_null = no
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/opt/freeradius-server-3.0.15/etc/raddb/mods-config/preprocess/huntgroups"
  	hints = "/opt/freeradius-server-3.0.15/etc/raddb/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/var/log/freeradius/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loading module "f_ticks" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/f_ticks
  linelog f_ticks {
  	filename = "syslog"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = ""
  	reference = "f_ticks.%{%{reply:Packet-Type}:-format}"
  }
  # Loading module "eduroam_log" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/f_ticks
  linelog eduroam_log {
  	filename = "syslog"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = ""
  	reference = "eduroam_log.%{%{reply:Packet-Type}:-format}"
  }
  # Loading module "inner_auth_log" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/f_ticks
  linelog inner_auth_log {
  	filename = "syslog"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = ""
  	reference = "inner_auth_log.%{%{reply:Packet-Type}:-format}"
  }
  # Loading module "radutmp" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/radutmp
  radutmp {
  	filename = "/var/log/freeradius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  	filename = "/opt/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/post-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  	filename = "/opt/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/pre-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  	filename = "/opt/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/access_reject"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  	filename = "/opt/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/access_challenge"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  	filename = "/opt/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/accounting_response"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "ntlm_auth" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  	wait = yes
  	program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  	shell_escape = yes
  }
  # Loaded module rlm_date
  # Loading module "date" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/date
  date {
  	format = "%b %e %Y %H:%M:%S %Z"
  	utc = no
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
   passchange {
   }
  	allow_retry = yes
  	winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/chap
  instantiate {
  }
  # Instantiating module "reject" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/always
  # Instantiating module "expiration" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/expiration
  # Instantiating module "detail" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail
  # Instantiating module "pap" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/pap
  # Instantiating module "eap" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_tls
   tls {
   }
TLS section "tls" missing, trying to use legacy configuration
   tls {
   	verify_depth = 0
   	pem_file_type = yes
   	private_key_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/server-myifam.key"
   	certificate_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/server-myifam.pem"
   	ca_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/tls-ca-bundle.pem"
   	dh_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/dh"
   	random_file = "/dev/urandom"
   	fragment_size = 1024
   	include_length = yes
   	auto_chain = yes
   	check_crl = no
   	check_all_crl = no
   	cipher_list = "DEFAULT"
   	ecdh_curve = "prime256v1"
    cache {
    	enable = no
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    	skip_if_ocsp_ok = no
    }
    ocsp {
    	enable = no
    	override_cert_url = no
    	use_nonce = yes
    	timeout = 0
    	softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
   	default_eap_type = "mschapv2"
   	copy_request_to_tunnel = yes
   	use_tunneled_reply = yes
   	virtual_server = "inner-tunnel"
   	include_length = yes
   	require_client_cert = no
   }
TLS section "tls" missing, trying to use legacy configuration
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
   	default_eap_type = "mschapv2"
   	copy_request_to_tunnel = yes
   	use_tunneled_reply = yes
   	proxy_tunneled_request_as_eap = yes
   	virtual_server = "inner-tunnel"
   	soh = no
   	require_client_cert = no
   }
TLS section "tls" missing, trying to use legacy configuration
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
   	with_ntdomain_hack = no
   	send_error = no
   }
  # Instantiating module "files" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/files
reading pairlist file /opt/freeradius-server-3.0.15/etc/raddb/mods-config/files/authorize
reading pairlist file /opt/freeradius-server-3.0.15/etc/raddb/mods-config/files/accounting
reading pairlist file /opt/freeradius-server-3.0.15/etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/linelog
  # Instantiating module "auth_log" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/detail.log
  # Instantiating module "etc_passwd" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "cache_eap" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "IPASS" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/realm
  # Instantiating module "preprocess" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/preprocess
reading pairlist file /opt/freeradius-server-3.0.15/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /opt/freeradius-server-3.0.15/etc/raddb/mods-config/preprocess/hints
  # Instantiating module "logintime" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/logintime
  # Instantiating module "f_ticks" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/f_ticks
  # Instantiating module "eduroam_log" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/f_ticks
  # Instantiating module "inner_auth_log" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/f_ticks
  # Instantiating module "attr_filter.post-proxy" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/access_reject
[/opt/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" 	found in filter list for realm "DEFAULT". 
[/opt/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" 	found in filter list for realm "DEFAULT". 
  # Instantiating module "attr_filter.access_challenge" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.15/etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "mschap" from file /opt/freeradius-server-3.0.15/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /opt/freeradius-server-3.0.15/etc/raddb/radiusd.conf
} # server
server eduroam { # from file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/eduroam
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading session {...}
 # Loading pre-proxy {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server eduroam
server inner-tunnel { # from file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading pre-proxy {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
server default { # from file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading session {...}
 # Loading pre-proxy {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
 thread pool {
 	start_servers = 5
 	max_servers = 32
 	min_spare_servers = 3
 	max_spare_servers = 10
 	max_requests_per_server = 0
 	cleanup_delay = 5
 	max_queue_size = 65536
 	auto_limit_acct = no
 }
Thread spawned new child 1. Total threads in pool: 1
Thread spawned new child 2. Total threads in pool: 2
Thread spawned new child 3. Total threads in pool: 3
Thread spawned new child 4. Total threads in pool: 4
Thread spawned new child 5. Total threads in pool: 5
Thread pool initialized
radiusd: #### Opening IP addresses and Ports ####
listen {
  	type = "auth"
  	ipaddr = 127.0.0.1
  	port = 18120
Thread 4 waiting to be assigned a request
Thread 5 waiting to be assigned a request
Thread 3 waiting to be assigned a request
Thread 2 waiting to be assigned a request
}
listen {
  	type = "auth"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "auth+acct"
  	ipaddr = *
  	port = 2083
  	proto = "tcp"
   tls {
   	verify_depth = 0
   	pem_file_type = yes
   	private_key_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/server-myifam.key"
   	certificate_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/server-myifam.pem"
   	ca_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/tls-ca-bundle.pem"
   	dh_file = "/opt/freeradius-server-3.0.15/etc/raddb/certs/dh"
   	random_file = "/dev/urandom"
   	fragment_size = 1024
   	include_length = yes
   	auto_chain = yes
   	check_crl = no
   	check_all_crl = no
   	cipher_list = "DEFAULT"
   	require_client_cert = yes
   	ecdh_curve = "prime256v1"
    cache {
    	enable = no
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    	skip_if_ocsp_ok = no
    }
    ocsp {
    	enable = no
    	override_cert_url = no
    	use_nonce = yes
    	timeout = 0
    	softfail = no
    }
   }
Thread 1 waiting to be assigned a request
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
  	clients = "radsec"
  client 127.0.0.1 {
  	ipaddr = 127.0.0.1
  	require_message_authenticator = no
  	secret = <<< secret >>>
  	proto = "tls"
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
  }
  client idp.myifam.upm.my {
  	ipaddr = 119.40.121.24
  	require_message_authenticator = no
  	secret = <<< secret >>>
  	proto = "tls"
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
  }
  client eduroam-idp.perdanauniversity.edu.my {
  	ipaddr = 122.0.23.57
  	require_message_authenticator = no
  	secret = <<< secret >>>
  	proto = "tls"
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
  }
}
listen {
  	type = "acct"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "auth"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on auth+acct proto tcp address * port 2083 (TLS) bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 36165
Listening on proxy address :: port 35195
Ready to process requests
 ... new connection request on TCP socket
Listening on auth+acct from client (119.40.121.24, 40204) -> (*, 2083, virtual-server=default)
Waking up in 0.4 seconds.
(0) Initiating new EAP-TLS session
(0) Setting verify mode to require certificate from client
(0) (other): before/accept initialization
(0) TLS_accept: before/accept initialization
(0) <<< recv TLS 1.0 Handshake [length 0096], ClientHello 
(0) TLS_accept: SSLv3 read client hello A
(0) >>> send TLS 1.0 Handshake [length 003e], ServerHello 
(0) TLS_accept: SSLv3 write server hello A
(0) >>> send TLS 1.0 Handshake [length 0abb], Certificate 
(0) TLS_accept: SSLv3 write certificate A
(0) >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange 
(0) TLS_accept: SSLv3 write key exchange A
(0) >>> send TLS 1.0 Handshake [length 47bd], CertificateRequest 
(0) TLS_accept: SSLv3 write certificate request A
(0) TLS_accept: SSLv3 flush data
(0) TLS_accept: Need to read more data: SSLv3 read client certificate A
(0) TLS_accept: Need to read more data: SSLv3 read client certificate A
(0) In SSL Handshake Phase
(0) In SSL Accept mode
Waking up in 0.4 seconds.
Waking up in 29.4 seconds.
Reached idle timeout on socket auth+acct from client (119.40.121.24, 40204) -> (*, 2083, virtual-server=default)
 ... shutting down socket auth+acct from client (119.40.121.24, 40204) -> (*, 2083, virtual-server=default)
Waking up in 2.9 seconds.
... cleaning up socket auth+acct from client (119.40.121.24, 40204) -> (*, 2083, virtual-server=default)
Ready to process requests
Threads: total/active/spare threads = 5/0/5
Waking up in 0.3 seconds.
Thread 5 got semaphore
Thread 5 handling request 0, (1 handled so far)
(0) Received Access-Request Id 0 from 175.139.225.78:56799 to 150.129.185.37:1812 length 144
(0)   User-Name = "demo@myifam.upm.my"
(0)   NAS-IP-Address = 127.0.0.1
(0)   Calling-Station-Id = "02-00-00-00-00-01"
(0)   Framed-MTU = 1400
(0)   NAS-Port-Type = Wireless-802.11
(0)   Connect-Info = "CONNECT 11Mbps 802.11b"
(0)   EAP-Message = 0x020000170164656d6f406d796966616d2e75706d2e6d79
(0)   Message-Authenticator = 0x6c919f552430c347dda227a697746409
(0) # Executing section authorize from file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(0)   authorize {
(0)     if (!(User-Name =~ /@/)){
(0)     if (!(User-Name =~ /@/)) -> FALSE
(0)     if (User-Name =~ /@$/){
(0)     if (User-Name =~ /@$/) -> FALSE
(0)     if (User-Name =~ /@.+?@/){
(0)     if (User-Name =~ /@.+?@/) -> FALSE
(0)     if (User-Name =~ /@.+?[^[:alnum:]\\.-]/){
(0)     if (User-Name =~ /@.+?[^[:alnum:]\\.-]/) -> FALSE
(0)     if (User-Name =~ /@[\\.-]/){
(0)     if (User-Name =~ /@[\\.-]/) -> FALSE
(0)     if (User-Name =~ /@.+?[\\.-]$/){
(0)     if (User-Name =~ /@.+?[\\.-]$/) -> FALSE
(0)     if (User-Name =~ /@[^\\.]+$/){
(0)     if (User-Name =~ /@[^\\.]+$/) -> FALSE
(0)     if (User-Name =~ /@.+?\\.\\./){
(0)     if (User-Name =~ /@.+?\\.\\./) -> FALSE
(0)     if (User-Name =~ /@myabc\\.com$/i){
(0)     if (User-Name =~ /@myabc\\.com$/i) -> FALSE
(0)     if (User-Name =~ /@wlan\\.[[:alnum:]]+\\.[[:alnum:]]+\\.3gppnetwork\\.org$/i){
(0)     if (User-Name =~ /@wlan\\.[[:alnum:]]+\\.[[:alnum:]]+\\.3gppnetwork\\.org$/i) -> FALSE
(0)     if (User-Name =~ /@gmail\\.co(m|\\.[[:alnum:]][[:alnum:]])$/i){
(0)     if (User-Name =~ /@gmail\\.co(m|\\.[[:alnum:]][[:alnum:]])$/i) -> FALSE
(0)     if (User-Name =~ /@yahoo\\.co(m|\\.[[:alnum:]][[:alnum:]])$/i){
(0)     if (User-Name =~ /@yahoo\\.co(m|\\.[[:alnum:]][[:alnum:]])$/i) -> FALSE
(0)     if (User-Name =~ /@hotmail\\.co(m|\\.[[:alnum:]][[:alnum:]])$/i){
(0)     if (User-Name =~ /@hotmail\\.co(m|\\.[[:alnum:]][[:alnum:]])$/i) -> FALSE
(0)     [preprocess] = ok
(0)     policy operator-name.authorize {
(0)       if ("%{client:Operator-Name}") {
(0)       EXPAND %{client:Operator-Name}
(0)          --> 
(0)       if ("%{client:Operator-Name}")  -> FALSE
(0)     } # policy operator-name.authorize = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "myifam.upm.my" for User-Name = "demo@myifam.upm.my"
(0) suffix: Found realm "myifam.upm.my"
(0) suffix: Adding Realm = "myifam.upm.my"
(0) suffix: Proxying request from user demo@myifam.upm.my to realm myifam.upm.my
(0) suffix: Preparing to proxy authentication request to realm "myifam.upm.my" 
(0)     [suffix] = updated
(0) eap: Request is supposed to be proxied to Realm myifam.upm.my. Not doing EAP.
(0)     [eap] = noop
(0)     [files] = noop
(0)     [pap] = noop
(0)   } # authorize = updated
(0) Starting proxy to home server 119.40.121.24 port 2083
(0) # Executing section pre-proxy from file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(0)   pre-proxy {
(0)     [files] = noop
(0)     if ("%{Packet-Type}" != "Accounting-Request") {
(0)     EXPAND %{Packet-Type}
(0)        --> Access-Request
(0)     if ("%{Packet-Type}" != "Accounting-Request")  -> TRUE
(0)     if ("%{Packet-Type}" != "Accounting-Request")  {
(0) attr_filter.pre-proxy: EXPAND %{Realm}
(0) attr_filter.pre-proxy:    --> myifam.upm.my
(0) attr_filter.pre-proxy: Matched entry DEFAULT at line 1
(0)       [attr_filter.pre-proxy] = updated
(0)     } # if ("%{Packet-Type}" != "Accounting-Request")  = updated
(0) pre_proxy_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d
(0) pre_proxy_log:    --> /var/log/freeradius/radacct/175.139.225.78/pre-proxy-detail-20170809
(0) pre_proxy_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d expands to /var/log/freeradius/radacct/175.139.225.78/pre-proxy-detail-20170809
(0) pre_proxy_log: EXPAND %t
(0) pre_proxy_log:    --> Wed Aug  9 00:48:32 2017
(0)     [pre_proxy_log] = ok
(0)   } # pre-proxy = updated
Trying SSL to port 2083 
Requiring Server certificate
(0) (other): before/connect initialization
(0) TLS_connect: before/connect initialization
(0) >>> send TLS 1.2  [length 00ee] 
(0) TLS_connect: SSLv2/v3 write client hello A
(0) <<< recv TLS 1.0 Handshake [length 0056], ServerHello 
(0) TLS_connect: SSLv3 read server hello A
(0) <<< recv TLS 1.0 Handshake [length 152c], Certificate 
(0) Creating attributes from certificate OIDs
(0) Creating attributes from certificate OIDs
(0) Creating attributes from certificate OIDs
(0) Creating attributes from certificate OIDs
(0) TLS_connect: SSLv3 read server certificate A
(0) <<< recv TLS 1.0 Handshake [length 4f05], CertificateRequest 
(0) TLS_connect: SSLv3 read server certificate request A
(0) <<< recv TLS 1.0 Handshake [length 0004], ServerHelloDone 
(0) TLS_connect: SSLv3 read server done A
(0) >>> send TLS 1.0 Handshake [length 056c], Certificate 
(0) TLS_connect: SSLv3 write client certificate A
(0) >>> send TLS 1.0 Handshake [length 0106], ClientKeyExchange 
(0) TLS_connect: SSLv3 write client key exchange A
(0) >>> send TLS 1.0 Handshake [length 0106], CertificateVerify 
(0) TLS_connect: SSLv3 write certificate verify A
(0) >>> send TLS 1.0 ChangeCipherSpec [length 0001] 
(0) TLS_connect: SSLv3 write change cipher spec A
(0) >>> send TLS 1.0 Handshake [length 0010], Finished 
(0) TLS_connect: SSLv3 write finished A
(0) TLS_connect: SSLv3 flush data
(0) <<< recv TLS 1.0 ChangeCipherSpec [length 0001] 
(0) <<< recv TLS 1.0 Handshake [length 0010], Finished 
(0) TLS_connect: SSLv3 read finished A
(0) (other): SSL negotiation finished successfully
Listening on proxy (150.129.185.37, 39490) -> home_server (119.40.121.24, 2083)
Waking up in 0.3 seconds.
(0) Proxying request to home server 119.40.121.24 port 2083 (TLS) timeout 30.000000
(0) Sent Access-Request Id 58 from 150.129.185.37:39490 to 119.40.121.24:2083 length 105
(0)   User-Name = "demo@myifam.upm.my"
(0)   Calling-Station-Id = "02-00-00-00-00-01"
(0)   EAP-Message = 0x020000170164656d6f406d796966616d2e75706d2e6d79
(0)   Message-Authenticator = 0x6c919f552430c347dda227a697746409
(0)   Proxy-State = 0x30
Thread 5 waiting to be assigned a request
(0) Marking home server 119.40.121.24 port 2083 alive
Waking up in 0.3 seconds.
Thread 4 got semaphore
Thread 4 handling request 0, (1 handled so far)
(0) Clearing existing &reply: attributes
(0) Received Access-Challenge Id 58 from 119.40.121.24:2083 to 150.129.185.37:39490 length 67
(0)   EAP-Message = 0x010100061520
(0)   Message-Authenticator = 0xae0b4764a6888d75fc296eab06a802f3
(0)   State = 0xfa899988fa888c583b9ffe65a0d465f7
(0)   Proxy-State = 0x30
(0) # Executing section post-proxy from file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(0)   post-proxy {
(0) post_proxy_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d
(0) post_proxy_log:    --> /var/log/freeradius/radacct/175.139.225.78/post-proxy-detail-20170809
(0) post_proxy_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d expands to /var/log/freeradius/radacct/175.139.225.78/post-proxy-detail-20170809
(0) post_proxy_log: EXPAND %t
(0) post_proxy_log:    --> Wed Aug  9 00:48:32 2017
(0)     [post_proxy_log] = ok
(0) eap: No pre-existing handler found
(0)     [eap] = noop
(0)   } # post-proxy = ok
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found.  Ignoring.
(0) # Executing group from file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(0) Sent Access-Challenge Id 0 from 150.129.185.37:1812 to 175.139.225.78:56799 length 0
(0)   EAP-Message = 0x010100061520
(0)   Message-Authenticator = 0xae0b4764a6888d75fc296eab06a802f3
(0)   State = 0xfa899988fa888c583b9ffe65a0d465f7
(0) Finished request
Thread 4 waiting to be assigned a request
Waking up in 0.1 seconds.
Thread 3 got semaphore
Thread 3 handling request 1, (1 handled so far)
(1) Received Access-Request Id 1 from 175.139.225.78:56799 to 150.129.185.37:1812 length 388
(1)   User-Name = "demo@myifam.upm.my"
(1)   NAS-IP-Address = 127.0.0.1
(1)   Calling-Station-Id = "02-00-00-00-00-01"
(1)   Framed-MTU = 1400
(1)   NAS-Port-Type = Wireless-802.11
(1)   Connect-Info = "CONNECT 11Mbps 802.11b"
(1)   EAP-Message = 0x020100f9150016030100ee010000ea03035989eb472559f4f5433c4378972fdc148a9eec2de59aa8978917798131fd3d8d000084c030c02cc028c024c014c00a00a3009f006b006a0039003800880087c032c02ec02ac026c00fc005009d003d00350084c02fc02bc027c023c013c00900a2009e006700
(1)   State = 0xfa899988fa888c583b9ffe65a0d465f7
(1)   Message-Authenticator = 0x949e811403ef597fea0c31a191401bef
(1) session-state: No cached attributes
(1) # Executing section authorize from file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(1)   authorize {
(1)     if (!(User-Name =~ /@/)){
(1)     if (!(User-Name =~ /@/)) -> FALSE
(1)     if (User-Name =~ /@$/){
(1)     if (User-Name =~ /@$/) -> FALSE
(1)     if (User-Name =~ /@.+?@/){
(1)     if (User-Name =~ /@.+?@/) -> FALSE
(1)     if (User-Name =~ /@.+?[^[:alnum:]\\.-]/){
(1)     if (User-Name =~ /@.+?[^[:alnum:]\\.-]/) -> FALSE
(1)     if (User-Name =~ /@[\\.-]/){
(1)     if (User-Name =~ /@[\\.-]/) -> FALSE
(1)     if (User-Name =~ /@.+?[\\.-]$/){
(1)     if (User-Name =~ /@.+?[\\.-]$/) -> FALSE
(1)     if (User-Name =~ /@[^\\.]+$/){
(1)     if (User-Name =~ /@[^\\.]+$/) -> FALSE
(1)     if (User-Name =~ /@.+?\\.\\./){
(1)     if (User-Name =~ /@.+?\\.\\./) -> FALSE
(1)     if (User-Name =~ /@myabc\\.com$/i){
(1)     if (User-Name =~ /@myabc\\.com$/i) -> FALSE
(1)     if (User-Name =~ /@wlan\\.[[:alnum:]]+\\.[[:alnum:]]+\\.3gppnetwork\\.org$/i){
(1)     if (User-Name =~ /@wlan\\.[[:alnum:]]+\\.[[:alnum:]]+\\.3gppnetwork\\.org$/i) -> FALSE
(1)     if (User-Name =~ /@gmail\\.co(m|\\.[[:alnum:]][[:alnum:]])$/i){
(1)     if (User-Name =~ /@gmail\\.co(m|\\.[[:alnum:]][[:alnum:]])$/i) -> FALSE
(1)     if (User-Name =~ /@yahoo\\.co(m|\\.[[:alnum:]][[:alnum:]])$/i){
(1)     if (User-Name =~ /@yahoo\\.co(m|\\.[[:alnum:]][[:alnum:]])$/i) -> FALSE
(1)     if (User-Name =~ /@hotmail\\.co(m|\\.[[:alnum:]][[:alnum:]])$/i){
(1)     if (User-Name =~ /@hotmail\\.co(m|\\.[[:alnum:]][[:alnum:]])$/i) -> FALSE
(1)     [preprocess] = ok
(1)     policy operator-name.authorize {
(1)       if ("%{client:Operator-Name}") {
(1)       EXPAND %{client:Operator-Name}
(1)          --> 
(1)       if ("%{client:Operator-Name}")  -> FALSE
(1)     } # policy operator-name.authorize = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: Looking up realm "myifam.upm.my" for User-Name = "demo@myifam.upm.my"
(1) suffix: Found realm "myifam.upm.my"
(1) suffix: Adding Realm = "myifam.upm.my"
(1) suffix: Proxying request from user demo@myifam.upm.my to realm myifam.upm.my
(1) suffix: Preparing to proxy authentication request to realm "myifam.upm.my" 
(1)     [suffix] = updated
(1) eap: Request is supposed to be proxied to Realm myifam.upm.my. Not doing EAP.
(1)     [eap] = noop
(1)     [files] = noop
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Starting proxy to home server 119.40.121.24 port 2083
(1) # Executing section pre-proxy from file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(1)   pre-proxy {
(1)     [files] = noop
(1)     if ("%{Packet-Type}" != "Accounting-Request") {
(1)     EXPAND %{Packet-Type}
(1)        --> Access-Request
(1)     if ("%{Packet-Type}" != "Accounting-Request")  -> TRUE
(1)     if ("%{Packet-Type}" != "Accounting-Request")  {
(1) attr_filter.pre-proxy: EXPAND %{Realm}
(1) attr_filter.pre-proxy:    --> myifam.upm.my
(1) attr_filter.pre-proxy: Matched entry DEFAULT at line 1
(1)       [attr_filter.pre-proxy] = updated
(1)     } # if ("%{Packet-Type}" != "Accounting-Request")  = updated
(1) pre_proxy_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d
(1) pre_proxy_log:    --> /var/log/freeradius/radacct/175.139.225.78/pre-proxy-detail-20170809
(1) pre_proxy_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d expands to /var/log/freeradius/radacct/175.139.225.78/pre-proxy-detail-20170809
(1) pre_proxy_log: EXPAND %t
(1) pre_proxy_log:    --> Wed Aug  9 00:48:32 2017
(1)     [pre_proxy_log] = ok
(1)   } # pre-proxy = updated
(1) Proxying request to home server 119.40.121.24 port 2083 (TLS) timeout 30.000000
(1) Sent Access-Request Id 186 from 150.129.185.37:39490 to 119.40.121.24:2083 length 349
(1)   User-Name = "demo@myifam.upm.my"
(1)   Calling-Station-Id = "02-00-00-00-00-01"
(1)   EAP-Message = 0x020100f9150016030100ee010000ea03035989eb472559f4f5433c4378972fdc148a9eec2de59aa8978917798131fd3d8d000084c030c02cc028c024c014c00a00a3009f006b006a0039003800880087c032c02ec02ac026c00fc005009d003d00350084c02fc02bc027c023c013c00900a2009e006700
(1)   State = 0xfa899988fa888c583b9ffe65a0d465f7
(1)   Message-Authenticator = 0x949e811403ef597fea0c31a191401bef
(1)   Proxy-State = 0x31
Thread 3 waiting to be assigned a request
Received packet will be too large! Set "fragment_size = 1093"
Closing TLS socket to home server
(0) >>> send TLS 1.0 Alert [length 0002], warning close_notify 
Client has closed connection
Waking up in 0.1 seconds.
Waking up in 0.1 seconds.
(1) Waiting for client retransmission in order to do a proxy retransmit
Waking up in 4.5 seconds.
Trying SSL to port 2083 
Requiring Server certificate
(0) (other): before/connect initialization
(0) TLS_connect: before/connect initialization
(0) >>> send TLS 1.2  [length 00ee] 
(0) TLS_connect: SSLv2/v3 write client hello A
(0) <<< recv TLS 1.0 Handshake [length 0056], ServerHello 
(0) TLS_connect: SSLv3 read server hello A
(0) <<< recv TLS 1.0 Handshake [length 152c], Certificate 
(0) Creating attributes from certificate OIDs
(0) Creating attributes from certificate OIDs
(0) Creating attributes from certificate OIDs
(0) Creating attributes from certificate OIDs
(0) TLS_connect: SSLv3 read server certificate A
(0) <<< recv TLS 1.0 Handshake [length 4f05], CertificateRequest 
(0) TLS_connect: SSLv3 read server certificate request A
(0) <<< recv TLS 1.0 Handshake [length 0004], ServerHelloDone 
(0) TLS_connect: SSLv3 read server done A
(0) >>> send TLS 1.0 Handshake [length 056c], Certificate 
(0) TLS_connect: SSLv3 write client certificate A
(0) >>> send TLS 1.0 Handshake [length 0106], ClientKeyExchange 
(0) TLS_connect: SSLv3 write client key exchange A
(0) >>> send TLS 1.0 Handshake [length 0106], CertificateVerify 
(0) TLS_connect: SSLv3 write certificate verify A
(0) >>> send TLS 1.0 ChangeCipherSpec [length 0001] 
(0) TLS_connect: SSLv3 write change cipher spec A
(0) >>> send TLS 1.0 Handshake [length 0010], Finished 
(0) TLS_connect: SSLv3 write finished A
(0) TLS_connect: SSLv3 flush data
(0) <<< recv TLS 1.0 ChangeCipherSpec [length 0001] 
(0) <<< recv TLS 1.0 Handshake [length 0010], Finished 
(0) TLS_connect: SSLv3 read finished A
(0) (other): SSL negotiation finished successfully
Listening on proxy (150.129.185.37, 57409) -> home_server (119.40.121.24, 2083)
(1) Proxying request to home server 119.40.121.24 port 2083 (TLS) timeout 30.000000
(1) Sent Access-Request Id 157 from 150.129.185.37:57409 to 119.40.121.24:2083 length 349
(1)   User-Name = "demo@myifam.upm.my"
(1)   Calling-Station-Id = "02-00-00-00-00-01"
(1)   EAP-Message = 0x020100f9150016030100ee010000ea03035989eb472559f4f5433c4378972fdc148a9eec2de59aa8978917798131fd3d8d000084c030c02cc028c024c014c00a00a3009f006b006a0039003800880087c032c02ec02ac026c00fc005009d003d00350084c02fc02bc027c023c013c00900a2009e006700
(1)   State = 0xfa899988fa888c583b9ffe65a0d465f7
(1)   Message-Authenticator = 0x949e811403ef597fea0c31a191401bef
(1)   Proxy-State = 0x31
Waking up in 1.7 seconds.
Thread 2 got semaphore
Thread 2 handling request 1, (1 handled so far)
(1) Clearing existing &reply: attributes
(1) Received Access-Reject Id 157 from 119.40.121.24:2083 to 150.129.185.37:57409 length 23
(1)   Proxy-State = 0x31
(1) # Executing section post-proxy from file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(1)   post-proxy {
(1) post_proxy_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d
(1) post_proxy_log:    --> /var/log/freeradius/radacct/175.139.225.78/post-proxy-detail-20170809
(1) post_proxy_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d expands to /var/log/freeradius/radacct/175.139.225.78/post-proxy-detail-20170809
(1) post_proxy_log: EXPAND %t
(1) post_proxy_log:    --> Wed Aug  9 00:48:32 2017
(1)     [post_proxy_log] = ok
(1) eap: No pre-existing handler found
(1)     [eap] = noop
(1)   } # post-proxy = ok
(1) Using Post-Auth-Type Reject
(1) # Executing group from file /opt/freeradius-server-3.0.15/etc/raddb/sites-enabled/default
(1)   Post-Auth-Type REJECT {
(1) reply_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d
(1) reply_log:    --> /var/log/freeradius/radacct/175.139.225.78/reply-detail-20170809
(1) reply_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d expands to /var/log/freeradius/radacct/175.139.225.78/reply-detail-20170809
(1) reply_log: WARNING: Skipping empty packet
(1)     [reply_log] = ok
(1) f_ticks: EXPAND f_ticks.%{%{reply:Packet-Type}:-format}
(1) f_ticks:    --> f_ticks.Access-Reject
(1) f_ticks: EXPAND F-TICKS/eduroam/1.0#REALM=%{Realm}#VISCOUNTRY=MY#VISINST=%{Operator-Name}#CSI=%{%{Calling-Station-Id}:-UnknownCSID}#RESULT=FAIL#
(1) f_ticks:    --> F-TICKS/eduroam/1.0#REALM=myifam.upm.my#VISCOUNTRY=MY#VISINST=#CSI=02-00-00-00-00-01#RESULT=FAIL#
(1)     [f_ticks] = ok
(1) eduroam_log: EXPAND eduroam_log.%{%{reply:Packet-Type}:-format}
(1) eduroam_log:    --> eduroam_log.Access-Reject
(1) eduroam_log: EXPAND eduroam-auth#ORG=%{request:Realm}#USER=%{User-Name}#CSI=%{%{Calling-Station-Id}:-Unknown Caller Id}#NAS=%{%{Called-Station-Id}:-Unknown Access Point}#CUI=%{%{reply:Chargeable-User-Identity}:-Unknown}#MSG=%{%{reply:Reply-Message}:-No Failure Reason}#RESULT=FAIL#
(1) eduroam_log:    --> eduroam-auth#ORG=myifam.upm.my#USER=demo@myifam.upm.my#CSI=02-00-00-00-00-01#NAS=Unknown Access Point#CUI=Unknown#MSG=No Failure Reason#RESULT=FAIL#
(1)     [eduroam_log] = ok
(1) linelog: EXPAND messages.%{%{reply:Packet-Type}:-default}
(1) linelog:    --> messages.Access-Reject
(1) linelog: EXPAND Rejected user: %{User-Name}
(1) linelog:    --> Rejected user: demo@myifam.upm.my
(1) linelog: EXPAND /var/log/freeradius/linelog
(1) linelog:    --> /var/log/freeradius/linelog
(1)     [linelog] = ok
(1)     redundant {
(1)       [ok] = ok
(1)     } # redundant = ok
(1) attr_filter.access_reject: EXPAND %{User-Name}
(1) attr_filter.access_reject:    --> demo@myifam.upm.my
(1) attr_filter.access_reject: Matched entry DEFAULT at line 11
(1)     [attr_filter.access_reject] = updated
(1) eap: ERROR: rlm_eap (EAP): No EAP session matching state 0xfa899988fa888c58
(1) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request
(1) eap: Failed to get handler, probably already removed, not inserting EAP-Failure
(1)     [eap] = noop
(1)     policy remove_reply_message_if_eap {
(1)       if (&reply:EAP-Message && &reply:Reply-Message) {
(1)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(1)       else {
(1)         [noop] = noop
(1)       } # else = noop
(1)     } # policy remove_reply_message_if_eap = noop
(1)   } # Post-Auth-Type REJECT = updated
(1) Delaying response for 1.000000 seconds
Thread 2 waiting to be assigned a request
Waking up in 0.3 seconds.
Waking up in 0.4 seconds.
(0) Cleaning up request packet ID 0 with timestamp +42
Waking up in 0.2 seconds.
(1) Sending delayed response
(1) Sent Access-Reject Id 1 from 150.129.185.37:1812 to 175.139.225.78:56799 length 20
Waking up in 3.9 seconds.
(1) Cleaning up request packet ID 1 with timestamp +42
Waking up in 20.9 seconds.