FreeRADIUS Version 3.0.16 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/filter including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.168.56.3 { ipaddr = 192.168.56.3 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.168.56.1 { ipaddr = 192.168.56.1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = ntlm_auth # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest # Creating Auth-Type = LDAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "localhost" port = 389 identity = "LDAP@MAH.TEST" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=MAH,dc=TEST" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = no require_encryption = yes require_strong = yes with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --domain=%{mschap:NT-Domain} --username=%{%{mschap:User-Name}:-00} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}" passchange { ntlm_auth = "/usr/bin/ntlm_auth --helper-protocol=ntlm-change-password-1 --allow-mschapv2" ntlm_auth_username = "username: %{mschap:User-Name}" ntlm_auth_domain = "nt-domain: %{mschap:NT-Domain}" } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --allow-mschapv2 --request-nt-key --domain=%{mschap:NT-Domain} --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } instantiate { } # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20445 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://WS16DE-OM-ADDC10.MAH.TEST:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://WS16DE-OM-ADDC10.MAH.TEST:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://WS16DE-OM-ADDC10.MAH.TEST:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://WS16DE-OM-ADDC10.MAH.TEST:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://WS16DE-OM-ADDC10.MAH.TEST:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 86400 cleanup_interval = 300 idle_timeout = 600 retry_delay = 30 spread = no } rlm_mschap (mschap): Opening additional connection (0), 1 of 32 pending slots used rlm_mschap (mschap): Opening additional connection (1), 1 of 31 pending slots used rlm_mschap (mschap): Opening additional connection (2), 1 of 30 pending slots used rlm_mschap (mschap): Opening additional connection (3), 1 of 29 pending slots used rlm_mschap (mschap): Opening additional connection (4), 1 of 28 pending slots used rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/freeradius.key" certificate_file = "/etc/ssl/certs/freeradius.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" dh_file = "/etc/freeradius/3.0/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:340 } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 55322 Listening on proxy address :: port 36990 Ready to process requests (0) Received Access-Request Id 102 from 192.168.56.3:1645 to 192.168.56.20:1812 length 221 (0) User-Name = "AD-OM\\Administrator" (0) Service-Type = Framed-User (0) Framed-MTU = 1500 (0) Called-Station-Id = "00-1B-0C-53-FE-83" (0) Calling-Station-Id = "00-0C-29-AF-4F-D2" (0) EAP-Message = 0x020100180141442d4f4d5c41646d696e6973747261746f72 (0) Message-Authenticator = 0xd1ce9bfe5d1db2ddf80d0c1f002e8fce (0) Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (0) NAS-Port-Type = Ethernet (0) NAS-Port = 50003 (0) NAS-Port-Id = "FastEthernet0/3" (0) NAS-IP-Address = 192.168.56.3 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "AD-OM\Administrator", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) ntdomain: Checking for prefix before "\" (0) ntdomain: Looking up realm "AD-OM" for User-Name = "AD-OM\Administrator" (0) ntdomain: No such realm "AD-OM" (0) [ntdomain] = noop (0) eap: Peer sent EAP Response (code 2) ID 1 length 24 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new EAP-TLS session (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 2 length 6 (0) eap: EAP session adding &reply:State = 0x11ed8b6c11ef92bf (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 102 from 192.168.56.20:1812 to 192.168.56.3:1645 length 0 (0) EAP-Message = 0x010200061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x11ed8b6c11ef92bfe7bfd1da5cb25eb4 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 103 from 192.168.56.3:1645 to 192.168.56.20:1812 length 381 (1) User-Name = "AD-OM\\Administrator" (1) Service-Type = Framed-User (1) Framed-MTU = 1500 (1) Called-Station-Id = "00-1B-0C-53-FE-83" (1) Calling-Station-Id = "00-0C-29-AF-4F-D2" (1) EAP-Message = 0x020200a619800000009c16030300970100009303035e39c6287951840db43a7944c2a8309224c1f91c5279ec8fef7e572956a01f7f00002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000040000500050100000000000a00080006001d (1) Message-Authenticator = 0xc61eafc0b22db4c5c2811ad0b09b3572 (1) Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (1) NAS-Port-Type = Ethernet (1) NAS-Port = 50003 (1) NAS-Port-Id = "FastEthernet0/3" (1) State = 0x11ed8b6c11ef92bfe7bfd1da5cb25eb4 (1) NAS-IP-Address = 192.168.56.3 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "AD-OM\Administrator", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) ntdomain: Checking for prefix before "\" (1) ntdomain: Looking up realm "AD-OM" for User-Name = "AD-OM\Administrator" (1) ntdomain: No such realm "AD-OM" (1) [ntdomain] = noop (1) eap: Peer sent EAP Response (code 2) ID 2 length 166 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x11ed8b6c11ef92bf (1) eap: Finished EAP session with state 0x11ed8b6c11ef92bf (1) eap: Previous EAP request found for state 0x11ed8b6c11ef92bf, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 156 bytes (1) eap_peap: Got complete TLS record (156 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before SSL initialization (1) eap_peap: TLS_accept: before SSL initialization (1) eap_peap: TLS_accept: before SSL initialization (1) eap_peap: <<< recv UNKNOWN TLS VERSION ?0304? [length 0097] (1) eap_peap: TLS_accept: SSLv3/TLS read client hello (1) eap_peap: >>> send TLS 1.2 [length 003d] (1) eap_peap: TLS_accept: SSLv3/TLS write server hello (1) eap_peap: >>> send TLS 1.2 [length 08fc] (1) eap_peap: TLS_accept: SSLv3/TLS write certificate (1) eap_peap: >>> send TLS 1.2 [length 014d] (1) eap_peap: TLS_accept: SSLv3/TLS write key exchange (1) eap_peap: >>> send TLS 1.2 [length 0004] (1) eap_peap: TLS_accept: SSLv3/TLS write server done (1) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_peap: In SSL Handshake Phase (1) eap_peap: In SSL Accept mode (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 3 length 1014 (1) eap: EAP session adding &reply:State = 0x11ed8b6c10ee92bf (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 103 from 192.168.56.20:1812 to 192.168.56.3:1645 length 0 (1) EAP-Message = 0x010303f619c000000a9e160303003d0200003903033bd974c90d088a3b522764aa9d7a0cb6810631b12ca5967c9a392760910b550700c030000011ff01000100000b0004030001020017000016030308fc0b0008f80008f5000578308205743082045ca00302010202135300000018c0df55b672b78bc7 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x11ed8b6c10ee92bfe7bfd1da5cb25eb4 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 104 from 192.168.56.3:1645 to 192.168.56.20:1812 length 221 (2) User-Name = "AD-OM\\Administrator" (2) Service-Type = Framed-User (2) Framed-MTU = 1500 (2) Called-Station-Id = "00-1B-0C-53-FE-83" (2) Calling-Station-Id = "00-0C-29-AF-4F-D2" (2) EAP-Message = 0x020300061900 (2) Message-Authenticator = 0xe40783cd50b00e0aa679abd482248616 (2) Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (2) NAS-Port-Type = Ethernet (2) NAS-Port = 50003 (2) NAS-Port-Id = "FastEthernet0/3" (2) State = 0x11ed8b6c10ee92bfe7bfd1da5cb25eb4 (2) NAS-IP-Address = 192.168.56.3 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "AD-OM\Administrator", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) ntdomain: Checking for prefix before "\" (2) ntdomain: Looking up realm "AD-OM" for User-Name = "AD-OM\Administrator" (2) ntdomain: No such realm "AD-OM" (2) [ntdomain] = noop (2) eap: Peer sent EAP Response (code 2) ID 3 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x11ed8b6c10ee92bf (2) eap: Finished EAP session with state 0x11ed8b6c10ee92bf (2) eap: Previous EAP request found for state 0x11ed8b6c10ee92bf, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 4 length 1010 (2) eap: EAP session adding &reply:State = 0x11ed8b6c13e992bf (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 104 from 192.168.56.20:1812 to 192.168.56.3:1645 length 0 (2) EAP-Message = 0x010403f219403d4149412c434e3d5075626c69632532304b657925323053657276696365732c434e3d53657276696365732c434e3d436f6e66696775726174696f6e2c44433d6d61682c44433d746573743f634143657274696669636174653f626173653f6f626a656374436c6173733d636572746966 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x11ed8b6c13e992bfe7bfd1da5cb25eb4 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 105 from 192.168.56.3:1645 to 192.168.56.20:1812 length 221 (3) User-Name = "AD-OM\\Administrator" (3) Service-Type = Framed-User (3) Framed-MTU = 1500 (3) Called-Station-Id = "00-1B-0C-53-FE-83" (3) Calling-Station-Id = "00-0C-29-AF-4F-D2" (3) EAP-Message = 0x020400061900 (3) Message-Authenticator = 0xec4c1acfbc124af0b0b0f5f77a03b771 (3) Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (3) NAS-Port-Type = Ethernet (3) NAS-Port = 50003 (3) NAS-Port-Id = "FastEthernet0/3" (3) State = 0x11ed8b6c13e992bfe7bfd1da5cb25eb4 (3) NAS-IP-Address = 192.168.56.3 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "AD-OM\Administrator", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) ntdomain: Checking for prefix before "\" (3) ntdomain: Looking up realm "AD-OM" for User-Name = "AD-OM\Administrator" (3) ntdomain: No such realm "AD-OM" (3) [ntdomain] = noop (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x11ed8b6c13e992bf (3) eap: Finished EAP session with state 0x11ed8b6c13e992bf (3) eap: Previous EAP request found for state 0x11ed8b6c13e992bf, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 5 length 716 (3) eap: EAP session adding &reply:State = 0x11ed8b6c12e892bf (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 105 from 192.168.56.20:1812 to 192.168.56.3:1645 length 0 (3) EAP-Message = 0x010502cc190003010001a351304f300b0603551d0f040403020186300f0603551d130101ff040530030101ff301d0603551d0e041604142ba4db4fa84c056b982f689be9f1032cc7e3ecc1301006092b06010401823715010403020100300d06092a864886f70d01010b05000382010100127df6d84bf6 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x11ed8b6c12e892bfe7bfd1da5cb25eb4 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 106 from 192.168.56.3:1645 to 192.168.56.20:1812 length 351 (4) User-Name = "AD-OM\\Administrator" (4) Service-Type = Framed-User (4) Framed-MTU = 1500 (4) Called-Station-Id = "00-1B-0C-53-FE-83" (4) Calling-Station-Id = "00-0C-29-AF-4F-D2" (4) EAP-Message = 0x0205008819800000007e1603030046100000424104d5c41868bbbbb69f98e65915fc26ad8cfa4c3beee278590e26607beeac30b7975991663481eb3727440be54ad3e7d95b6492775dcc3d63b0218366ca974a0a2f14030300010116030300280000000000000000078ca9ad81b61e04a019b7dd953914 (4) Message-Authenticator = 0x44f8c5dd2332d2f88d528da6fdfb86ec (4) Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (4) NAS-Port-Type = Ethernet (4) NAS-Port = 50003 (4) NAS-Port-Id = "FastEthernet0/3" (4) State = 0x11ed8b6c12e892bfe7bfd1da5cb25eb4 (4) NAS-IP-Address = 192.168.56.3 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "AD-OM\Administrator", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) ntdomain: Checking for prefix before "\" (4) ntdomain: Looking up realm "AD-OM" for User-Name = "AD-OM\Administrator" (4) ntdomain: No such realm "AD-OM" (4) [ntdomain] = noop (4) eap: Peer sent EAP Response (code 2) ID 5 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x11ed8b6c12e892bf (4) eap: Finished EAP session with state 0x11ed8b6c12e892bf (4) eap: Previous EAP request found for state 0x11ed8b6c12e892bf, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer indicated complete TLS record size will be 126 bytes (4) eap_peap: Got complete TLS record (126 bytes) (4) eap_peap: [eaptls verify] = length included (4) eap_peap: TLS_accept: SSLv3/TLS write server done (4) eap_peap: <<< recv TLS 1.2 [length 0046] (4) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (4) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (4) eap_peap: <<< recv TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3/TLS read finished (4) eap_peap: >>> send TLS 1.2 [length 0001] (4) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (4) eap_peap: >>> send TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3/TLS write finished (4) eap_peap: (other): SSL negotiation finished successfully (4) eap_peap: SSL Connection Established (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 6 length 57 (4) eap: EAP session adding &reply:State = 0x11ed8b6c15eb92bf (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 106 from 192.168.56.20:1812 to 192.168.56.3:1645 length 0 (4) EAP-Message = 0x0106003919001403030001011603030028de31c6abadc1d2adb06c4d764a003b474d411ae2f071264400297edb93bf3d22cabd14ec5d00a56f (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x11ed8b6c15eb92bfe7bfd1da5cb25eb4 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 107 from 192.168.56.3:1645 to 192.168.56.20:1812 length 221 (5) User-Name = "AD-OM\\Administrator" (5) Service-Type = Framed-User (5) Framed-MTU = 1500 (5) Called-Station-Id = "00-1B-0C-53-FE-83" (5) Calling-Station-Id = "00-0C-29-AF-4F-D2" (5) EAP-Message = 0x020600061900 (5) Message-Authenticator = 0xb1cb452c826b39b7f0d9bee778324f8c (5) Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (5) NAS-Port-Type = Ethernet (5) NAS-Port = 50003 (5) NAS-Port-Id = "FastEthernet0/3" (5) State = 0x11ed8b6c15eb92bfe7bfd1da5cb25eb4 (5) NAS-IP-Address = 192.168.56.3 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "AD-OM\Administrator", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) ntdomain: Checking for prefix before "\" (5) ntdomain: Looking up realm "AD-OM" for User-Name = "AD-OM\Administrator" (5) ntdomain: No such realm "AD-OM" (5) [ntdomain] = noop (5) eap: Peer sent EAP Response (code 2) ID 6 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x11ed8b6c15eb92bf (5) eap: Finished EAP session with state 0x11ed8b6c15eb92bf (5) eap: Previous EAP request found for state 0x11ed8b6c15eb92bf, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment. handshake is finished (5) eap_peap: [eaptls verify] = success (5) eap_peap: [eaptls process] = success (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: Sending EAP Request (code 1) ID 7 length 40 (5) eap: EAP session adding &reply:State = 0x11ed8b6c14ea92bf (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 107 from 192.168.56.20:1812 to 192.168.56.3:1645 length 0 (5) EAP-Message = 0x010700281900170303001dde31c6abadc1d2aee8f2b8e26d301b7ca09ac83f714c8332a4739dc7c7 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x11ed8b6c14ea92bfe7bfd1da5cb25eb4 (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 108 from 192.168.56.3:1645 to 192.168.56.20:1812 length 270 (6) User-Name = "AD-OM\\Administrator" (6) Service-Type = Framed-User (6) Framed-MTU = 1500 (6) Called-Station-Id = "00-1B-0C-53-FE-83" (6) Calling-Station-Id = "00-0C-29-AF-4F-D2" (6) EAP-Message = 0x020700371900170303002c0000000000000001baad9c4fdc31907053fa35b07c2b9a4f037286add16bfee56ae768a83f8763806f50ea58 (6) Message-Authenticator = 0x55ddea8034470c0d6aa27ecad101890f (6) Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (6) NAS-Port-Type = Ethernet (6) NAS-Port = 50003 (6) NAS-Port-Id = "FastEthernet0/3" (6) State = 0x11ed8b6c14ea92bfe7bfd1da5cb25eb4 (6) NAS-IP-Address = 192.168.56.3 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "AD-OM\Administrator", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) ntdomain: Checking for prefix before "\" (6) ntdomain: Looking up realm "AD-OM" for User-Name = "AD-OM\Administrator" (6) ntdomain: No such realm "AD-OM" (6) [ntdomain] = noop (6) eap: Peer sent EAP Response (code 2) ID 7 length 55 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x11ed8b6c14ea92bf (6) eap: Finished EAP session with state 0x11ed8b6c14ea92bf (6) eap: Previous EAP request found for state 0x11ed8b6c14ea92bf, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: [eaptls verify] = ok (6) eap_peap: Done initial handshake (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - AD-OM\Administrator (6) eap_peap: Got inner identity 'AD-OM\Administrator' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x020700180141442d4f4d5c41646d696e6973747261746f72 (6) eap_peap: Setting User-Name to AD-OM\Administrator (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x020700180141442d4f4d5c41646d696e6973747261746f72 (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "AD-OM\\Administrator" (6) eap_peap: Service-Type = Framed-User (6) eap_peap: Framed-MTU = 1500 (6) eap_peap: Called-Station-Id = "00-1B-0C-53-FE-83" (6) eap_peap: Calling-Station-Id = "00-0C-29-AF-4F-D2" (6) eap_peap: Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (6) eap_peap: NAS-Port-Type = Ethernet (6) eap_peap: NAS-Port = 50003 (6) eap_peap: NAS-Port-Id = "FastEthernet0/3" (6) eap_peap: NAS-IP-Address = 192.168.56.3 (6) eap_peap: Event-Timestamp = "Feb 4 2020 19:29:43 UTC" (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x020700180141442d4f4d5c41646d696e6973747261746f72 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "AD-OM\\Administrator" (6) Service-Type = Framed-User (6) Framed-MTU = 1500 (6) Called-Station-Id = "00-1B-0C-53-FE-83" (6) Calling-Station-Id = "00-0C-29-AF-4F-D2" (6) Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (6) NAS-Port-Type = Ethernet (6) NAS-Port = 50003 (6) NAS-Port-Id = "FastEthernet0/3" (6) NAS-IP-Address = 192.168.56.3 (6) Event-Timestamp = "Feb 4 2020 19:29:43 UTC" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "AD-OM\Administrator", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 7 length 24 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: Issuing Challenge (6) eap: Sending EAP Request (code 1) ID 8 length 43 (6) eap: EAP session adding &reply:State = 0xa5a5a21aa5adb8fa (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x0108002b1a01080026107139e0a7c154d0b0f31bc479af1dc74d667265657261646975732d332e302e3136 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xa5a5a21aa5adb8fa9abf9a2c81a7c95f (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: EAP-Message = 0x0108002b1a01080026107139e0a7c154d0b0f31bc479af1dc74d667265657261646975732d332e302e3136 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0xa5a5a21aa5adb8fa9abf9a2c81a7c95f (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: EAP-Message = 0x0108002b1a01080026107139e0a7c154d0b0f31bc479af1dc74d667265657261646975732d332e302e3136 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0xa5a5a21aa5adb8fa9abf9a2c81a7c95f (6) eap_peap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 8 length 74 (6) eap: EAP session adding &reply:State = 0x11ed8b6c17e592bf (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 108 from 192.168.56.20:1812 to 192.168.56.3:1645 length 0 (6) EAP-Message = 0x0108004a1900170303003fde31c6abadc1d2af90be24c854c2341fae2a946e5c473993551a2f772f69db07f09877eb94ef0575b139888c147db41db7677c33ae9dcb66f297596d16edbd (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x11ed8b6c17e592bfe7bfd1da5cb25eb4 (6) Finished request Waking up in 4.8 seconds. (7) Received Access-Request Id 109 from 192.168.56.3:1645 to 192.168.56.20:1812 length 324 (7) User-Name = "AD-OM\\Administrator" (7) Service-Type = Framed-User (7) Framed-MTU = 1500 (7) Called-Station-Id = "00-1B-0C-53-FE-83" (7) Calling-Station-Id = "00-0C-29-AF-4F-D2" (7) EAP-Message = 0x0208006d190017030300620000000000000002b8bc8fd810c14b7058a2e61e2e0070dfca6025188928a4e408bf9bf54d0226b8570d185cb0a76cc0bd4cc74155091e0ff8cb8dae36311ea6fe2e5a53f91798267589beee313ad1adf8f3c7a0cc33cae1db2f0fa1ed148f4bdb93 (7) Message-Authenticator = 0xa5cead79d83b9a88aed91ddf0b459227 (7) Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (7) NAS-Port-Type = Ethernet (7) NAS-Port = 50003 (7) NAS-Port-Id = "FastEthernet0/3" (7) State = 0x11ed8b6c17e592bfe7bfd1da5cb25eb4 (7) NAS-IP-Address = 192.168.56.3 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "AD-OM\Administrator", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) ntdomain: Checking for prefix before "\" (7) ntdomain: Looking up realm "AD-OM" for User-Name = "AD-OM\Administrator" (7) ntdomain: No such realm "AD-OM" (7) [ntdomain] = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 109 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xa5a5a21aa5adb8fa (7) eap: Finished EAP session with state 0x11ed8b6c17e592bf (7) eap: Previous EAP request found for state 0x11ed8b6c17e592bf, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x0208004e1a0208004931265d94fe5ec1f0eba531c29fa039914900000000000000001c4a38cc4687a06e0460029cf4726f3a1421489985f5b4390041442d4f4d5c41646d696e6973747261746f72 (7) eap_peap: Setting User-Name to AD-OM\Administrator (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x0208004e1a0208004931265d94fe5ec1f0eba531c29fa039914900000000000000001c4a38cc4687a06e0460029cf4726f3a1421489985f5b4390041442d4f4d5c41646d696e6973747261746f72 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "AD-OM\\Administrator" (7) eap_peap: State = 0xa5a5a21aa5adb8fa9abf9a2c81a7c95f (7) eap_peap: Service-Type = Framed-User (7) eap_peap: Framed-MTU = 1500 (7) eap_peap: Called-Station-Id = "00-1B-0C-53-FE-83" (7) eap_peap: Calling-Station-Id = "00-0C-29-AF-4F-D2" (7) eap_peap: Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (7) eap_peap: NAS-Port-Type = Ethernet (7) eap_peap: NAS-Port = 50003 (7) eap_peap: NAS-Port-Id = "FastEthernet0/3" (7) eap_peap: NAS-IP-Address = 192.168.56.3 (7) eap_peap: Event-Timestamp = "Feb 4 2020 19:29:43 UTC" (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x0208004e1a0208004931265d94fe5ec1f0eba531c29fa039914900000000000000001c4a38cc4687a06e0460029cf4726f3a1421489985f5b4390041442d4f4d5c41646d696e6973747261746f72 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "AD-OM\\Administrator" (7) State = 0xa5a5a21aa5adb8fa9abf9a2c81a7c95f (7) Service-Type = Framed-User (7) Framed-MTU = 1500 (7) Called-Station-Id = "00-1B-0C-53-FE-83" (7) Calling-Station-Id = "00-0C-29-AF-4F-D2" (7) Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (7) NAS-Port-Type = Ethernet (7) NAS-Port = 50003 (7) NAS-Port-Id = "FastEthernet0/3" (7) NAS-IP-Address = 192.168.56.3 (7) Event-Timestamp = "Feb 4 2020 19:29:43 UTC" (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "AD-OM\Administrator", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 78 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop rlm_ldap (ldap): Closing connection (0): Hit idle_timeout, was idle for 68 seconds rlm_ldap (ldap): Closing connection (1): Hit idle_timeout, was idle for 68 seconds rlm_ldap (ldap): Closing connection (2): Hit idle_timeout, was idle for 68 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (3): Hit idle_timeout, was idle for 68 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (4): Hit idle_timeout, was idle for 68 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (5), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://WS16DE-OM-ADDC10.MAH.TEST:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (5) (7) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap: --> (samaccountname=AD-OM\5c5cAdministrator) (7) ldap: Performing search in "dc=MAH,dc=TEST" with filter "(samaccountname=AD-OM\5c5cAdministrator)", scope "sub" (7) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.mah.test/DC=ForestDnsZones,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.mah.test/DC=DomainDnsZones,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://mah.test/CN=Configuration,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (7) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (5) - Was referred to a different LDAP server Need 3 more connections to reach min connections (3) rlm_ldap (ldap): Opening additional connection (6), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://WS16DE-OM-ADDC10.MAH.TEST:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (7) [ldap] = notfound (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0xa5a5a21aa5adb8fa (7) eap: Finished EAP session with state 0xa5a5a21aa5adb8fa (7) eap: Previous EAP request found for state 0xa5a5a21aa5adb8fa, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) eap_mschapv2: authenticate { (7) mschap: Creating challenge hash with username: Administrator (7) mschap: Client is using MS-CHAPv2 (7) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --domain=%{mschap:NT-Domain} --username=%{%{mschap:User-Name}:-00} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}: (7) mschap: EXPAND --domain=%{mschap:NT-Domain} (7) mschap: --> --domain=AD-OM (7) mschap: EXPAND --username=%{%{mschap:User-Name}:-00} (7) mschap: --> --username=Administrator (7) mschap: Creating challenge hash with username: Administrator (7) mschap: EXPAND --challenge=%{%{mschap:Challenge}:-00} (7) mschap: --> --challenge=412bb0770c2ce950 (7) mschap: EXPAND --nt-response=%{%{mschap:NT-Response}:-00} (7) mschap: --> --nt-response=1c4a38cc4687a06e0460029cf4726f3a1421489985f5b439 (7) mschap: Program returned code (0) and output 'NT_KEY: 3FCDE13779D053A0ACC491CF9325F8C0' (7) [mschap] = ok (7) } # authenticate = ok (7) MSCHAP Success (7) eap: Sending EAP Request (code 1) ID 9 length 51 (7) eap: EAP session adding &reply:State = 0xa5a5a21aa4acb8fa (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x010900331a0308002e533d46454442424537323132363142453832433732364537343536313432354438363139423446373032 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xa5a5a21aa4acb8fa9abf9a2c81a7c95f (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: EAP-Message = 0x010900331a0308002e533d46454442424537323132363142453832433732364537343536313432354438363139423446373032 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0xa5a5a21aa4acb8fa9abf9a2c81a7c95f (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: EAP-Message = 0x010900331a0308002e533d46454442424537323132363142453832433732364537343536313432354438363139423446373032 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0xa5a5a21aa4acb8fa9abf9a2c81a7c95f (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 9 length 82 (7) eap: EAP session adding &reply:State = 0x11ed8b6c16e492bf (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) Sent Access-Challenge Id 109 from 192.168.56.20:1812 to 192.168.56.3:1645 length 0 (7) EAP-Message = 0x0109005219001703030047de31c6abadc1d2b007917cc02012b3af2d2cc2336b2c4b671560bb304aa1fdf362cf8660a859be5b5518beca32c96d7d89d2ad5adbd8f808056910738709528ce2d4b0f85e402c (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x11ed8b6c16e492bfe7bfd1da5cb25eb4 (7) Finished request Waking up in 4.7 seconds. (8) Received Access-Request Id 110 from 192.168.56.3:1645 to 192.168.56.20:1812 length 252 (8) User-Name = "AD-OM\\Administrator" (8) Service-Type = Framed-User (8) Framed-MTU = 1500 (8) Called-Station-Id = "00-1B-0C-53-FE-83" (8) Calling-Station-Id = "00-0C-29-AF-4F-D2" (8) EAP-Message = 0x020900251900170303001a0000000000000003e029acdeff9fc7a3396f1b76b98edf86f538 (8) Message-Authenticator = 0xe345cd931a4aad9a214c4a17cdbc80fc (8) Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (8) NAS-Port-Type = Ethernet (8) NAS-Port = 50003 (8) NAS-Port-Id = "FastEthernet0/3" (8) State = 0x11ed8b6c16e492bfe7bfd1da5cb25eb4 (8) NAS-IP-Address = 192.168.56.3 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "AD-OM\Administrator", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) ntdomain: Checking for prefix before "\" (8) ntdomain: Looking up realm "AD-OM" for User-Name = "AD-OM\Administrator" (8) ntdomain: No such realm "AD-OM" (8) [ntdomain] = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 37 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xa5a5a21aa4acb8fa (8) eap: Finished EAP session with state 0x11ed8b6c16e492bf (8) eap: Previous EAP request found for state 0x11ed8b6c16e492bf, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x020900061a03 (8) eap_peap: Setting User-Name to AD-OM\Administrator (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x020900061a03 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "AD-OM\\Administrator" (8) eap_peap: State = 0xa5a5a21aa4acb8fa9abf9a2c81a7c95f (8) eap_peap: Service-Type = Framed-User (8) eap_peap: Framed-MTU = 1500 (8) eap_peap: Called-Station-Id = "00-1B-0C-53-FE-83" (8) eap_peap: Calling-Station-Id = "00-0C-29-AF-4F-D2" (8) eap_peap: Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (8) eap_peap: NAS-Port-Type = Ethernet (8) eap_peap: NAS-Port = 50003 (8) eap_peap: NAS-Port-Id = "FastEthernet0/3" (8) eap_peap: NAS-IP-Address = 192.168.56.3 (8) eap_peap: Event-Timestamp = "Feb 4 2020 19:29:43 UTC" (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x020900061a03 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "AD-OM\\Administrator" (8) State = 0xa5a5a21aa4acb8fa9abf9a2c81a7c95f (8) Service-Type = Framed-User (8) Framed-MTU = 1500 (8) Called-Station-Id = "00-1B-0C-53-FE-83" (8) Calling-Station-Id = "00-0C-29-AF-4F-D2" (8) Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (8) NAS-Port-Type = Ethernet (8) NAS-Port = 50003 (8) NAS-Port-Id = "FastEthernet0/3" (8) NAS-IP-Address = 192.168.56.3 (8) Event-Timestamp = "Feb 4 2020 19:29:43 UTC" (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "AD-OM\Administrator", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 6 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) [files] = noop rlm_ldap (ldap): Reserved connection (6) (8) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (8) ldap: --> (samaccountname=AD-OM\5c5cAdministrator) (8) ldap: Performing search in "dc=MAH,dc=TEST" with filter "(samaccountname=AD-OM\5c5cAdministrator)", scope "sub" (8) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.mah.test/DC=ForestDnsZones,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.mah.test/DC=DomainDnsZones,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://mah.test/CN=Configuration,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (8) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (6) - Was referred to a different LDAP server (8) [ldap] = notfound (8) [expiration] = noop (8) [logintime] = noop (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0xa5a5a21aa4acb8fa (8) eap: Finished EAP session with state 0xa5a5a21aa4acb8fa (8) eap: Previous EAP request found for state 0xa5a5a21aa4acb8fa, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap: Sending EAP Success (code 3) ID 9 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) post-auth { (8) if (LDAP-Group == "Administrators") { (8) Searching for user in group "Administrators" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (7), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://WS16DE-OM-ADDC10.MAH.TEST:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (7) (8) EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (8) --> (samaccountname=AD-OM\5c5cAdministrator) (8) Performing search in "dc=MAH,dc=TEST" with filter "(samaccountname=AD-OM\5c5cAdministrator)", scope "sub" (8) Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.mah.test/DC=ForestDnsZones,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.mah.test/DC=DomainDnsZones,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://mah.test/CN=Configuration,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (8) Search returned no results rlm_ldap (ldap): Deleting connection (7) - Was referred to a different LDAP server (8) if (LDAP-Group == "Administrators") -> FALSE (8) if (0) { (8) if (0) -> FALSE (8) } # post-auth = noop (8) } # server inner-tunnel (8) Virtual server sending reply (8) EAP-Message = 0x03090004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) User-Name = "AD-OM\\Administrator" (8) eap_peap: Got tunneled reply code 2 (8) eap_peap: EAP-Message = 0x03090004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: User-Name = "AD-OM\\Administrator" (8) eap_peap: Got tunneled reply RADIUS code 2 (8) eap_peap: EAP-Message = 0x03090004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: User-Name = "AD-OM\\Administrator" (8) eap_peap: Tunneled authentication was successful (8) eap_peap: SUCCESS (8) eap_peap: Saving tunneled attributes for later (8) eap: Sending EAP Request (code 1) ID 10 length 46 (8) eap: EAP session adding &reply:State = 0x11ed8b6c19e792bf (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) Sent Access-Challenge Id 110 from 192.168.56.20:1812 to 192.168.56.3:1645 length 0 (8) EAP-Message = 0x010a002e19001703030023de31c6abadc1d2b19613fc8e6decf206de126c72100d3a8c69d98ce8a06efafd5a7a9d (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x11ed8b6c19e792bfe7bfd1da5cb25eb4 (8) Finished request Waking up in 4.6 seconds. (9) Received Access-Request Id 111 from 192.168.56.3:1645 to 192.168.56.20:1812 length 261 (9) User-Name = "AD-OM\\Administrator" (9) Service-Type = Framed-User (9) Framed-MTU = 1500 (9) Called-Station-Id = "00-1B-0C-53-FE-83" (9) Calling-Station-Id = "00-0C-29-AF-4F-D2" (9) EAP-Message = 0x020a002e1900170303002300000000000000044756c71b58472bf0d24f575e66eb199304ad412870a953b45d9a0c (9) Message-Authenticator = 0x3610c188001f44318f0c9a7673c85fa0 (9) Cisco-AVPair = "audit-session-id=C0A838030000001A006ED0A2" (9) NAS-Port-Type = Ethernet (9) NAS-Port = 50003 (9) NAS-Port-Id = "FastEthernet0/3" (9) State = 0x11ed8b6c19e792bfe7bfd1da5cb25eb4 (9) NAS-IP-Address = 192.168.56.3 (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /@\./) { (9) if (&User-Name =~ /@\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "AD-OM\Administrator", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) ntdomain: Checking for prefix before "\" (9) ntdomain: Looking up realm "AD-OM" for User-Name = "AD-OM\Administrator" (9) ntdomain: No such realm "AD-OM" (9) [ntdomain] = noop (9) eap: Peer sent EAP Response (code 2) ID 10 length 46 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x11ed8b6c19e792bf (9) eap: Finished EAP session with state 0x11ed8b6c19e792bf (9) eap: Previous EAP request found for state 0x11ed8b6c19e792bf, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv success (9) eap_peap: Received EAP-TLV response (9) eap_peap: Success (9) eap_peap: Using saved attributes from the original Access-Accept (9) eap_peap: User-Name = "AD-OM\\Administrator" (9) eap: Sending EAP Success (code 3) ID 10 length 4 (9) eap: Freeing handler (9) [eap] = ok (9) } # authenticate = ok (9) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (9) post-auth { (9) if (LDAP-Group == "Administrators") { (9) Searching for user in group "Administrators" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (8), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://WS16DE-OM-ADDC10.MAH.TEST:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (8) (9) EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (9) --> (samaccountname=AD-OM\5c5cAdministrator) (9) Performing search in "dc=MAH,dc=TEST" with filter "(samaccountname=AD-OM\5c5cAdministrator)", scope "sub" (9) Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.mah.test/DC=ForestDnsZones,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.mah.test/DC=DomainDnsZones,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://mah.test/CN=Configuration,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (9) Search returned no results rlm_ldap (ldap): Deleting connection (8) - Was referred to a different LDAP server (9) if (LDAP-Group == "Administrators") -> FALSE (9) elsif (LDAP-Group == "Consultants") { (9) Searching for user in group "Consultants" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (9), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://WS16DE-OM-ADDC10.MAH.TEST:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (9) (9) EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (9) --> (samaccountname=AD-OM\5c5cAdministrator) (9) Performing search in "dc=MAH,dc=TEST" with filter "(samaccountname=AD-OM\5c5cAdministrator)", scope "sub" (9) Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.mah.test/DC=ForestDnsZones,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.mah.test/DC=DomainDnsZones,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://mah.test/CN=Configuration,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (9) Search returned no results rlm_ldap (ldap): Deleting connection (9) - Was referred to a different LDAP server (9) elsif (LDAP-Group == "Consultants") -> FALSE (9) elsif (LDAP-Group == "Directors") { (9) Searching for user in group "Directors" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (10), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://WS16DE-OM-ADDC10.MAH.TEST:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (10) (9) EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (9) --> (samaccountname=AD-OM\5c5cAdministrator) (9) Performing search in "dc=MAH,dc=TEST" with filter "(samaccountname=AD-OM\5c5cAdministrator)", scope "sub" (9) Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.mah.test/DC=ForestDnsZones,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.mah.test/DC=DomainDnsZones,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://mah.test/CN=Configuration,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (9) Search returned no results rlm_ldap (ldap): Deleting connection (10) - Was referred to a different LDAP server (9) elsif (LDAP-Group == "Directors") -> FALSE (9) elsif (LDAP-Group == "Finance") { (9) Searching for user in group "Finance" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (11), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 ldap://WS16DE-OM-ADDC10.MAH.TEST:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (11) (9) EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (9) --> (samaccountname=AD-OM\5c5cAdministrator) (9) Performing search in "dc=MAH,dc=TEST" with filter "(samaccountname=AD-OM\5c5cAdministrator)", scope "sub" (9) Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.mah.test/DC=ForestDnsZones,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.mah.test/DC=DomainDnsZones,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://mah.test/CN=Configuration,DC=mah,DC=test rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (9) Search returned no results rlm_ldap (ldap): Deleting connection (11) - Was referred to a different LDAP server (9) elsif (LDAP-Group == "Finance") -> FALSE (9) else { (9) update reply { (9) Service-Type := Framed-User (9) Framed-MTU := 1344 (9) Tunnel-Type := VLAN (9) Tunnel-Medium-Type := IEEE-802 (9) Tunnel-Private-Group-Id := 100 (9) } # update reply = noop (9) } # else = noop (9) update { (9) No attributes updated (9) } # update = noop (9) [exec] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) } # post-auth = noop (9) Sent Access-Accept Id 111 from 192.168.56.20:1812 to 192.168.56.3:1645 length 0 (9) User-Name = "AD-OM\\Administrator" (9) MS-MPPE-Recv-Key = 0x05c0df111ac05a16d88dc1e43163e2c60690239cb8ff6257566b6b79a4526df7 (9) MS-MPPE-Send-Key = 0xb8ae3f99f395939b09f30c5d075f16a984e7a7c316c10c9c46d84259b4283e95 (9) EAP-Message = 0x030a0004 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) Service-Type := Framed-User (9) Framed-MTU := 1344 (9) Tunnel-Type := VLAN (9) Tunnel-Medium-Type := IEEE-802 (9) Tunnel-Private-Group-Id := "100" (9) Finished request Waking up in 4.6 seconds. (0) Cleaning up request packet ID 102 with timestamp +67 (1) Cleaning up request packet ID 103 with timestamp +67 (2) Cleaning up request packet ID 104 with timestamp +67 (3) Cleaning up request packet ID 105 with timestamp +67 (4) Cleaning up request packet ID 106 with timestamp +68 (5) Cleaning up request packet ID 107 with timestamp +68 (6) Cleaning up request packet ID 108 with timestamp +68 (7) Cleaning up request packet ID 109 with timestamp +68 (8) Cleaning up request packet ID 110 with timestamp +68 (9) Cleaning up request packet ID 111 with timestamp +68 Ready to process requests