--------------------------------------------------->
> What do you want to do? What do you want to achieve? What authentication are
> you planning to use ?
---------------------------------------------------<
 
Hi.
Principally sorry for my bad english.I am setup freeradius .I want  chain all network client.My problem is
 
- ı am setup freeradius server
- I am setup layer2 switch
- Iam configure switch and client pc
- and start
-but client pc sending access request to switch, switch request to server ,server message is "access challenge" what is this I dont know and what I do?

 

------------------------------------------------------------------------------------------------------------
> rad_recv: Access-Request packet from host 10.1.254.38 port 49155, id=0,
> length=73
> Threads: total/active/spare threads = 5/0/5
> Thread 2 got semaphore
> Thread 2 handling request 0, (1 handled so far)
>        NAS-IP-Address = 10.1.254.38
>        NAS-Port-Type = Ethernet
>        NAS-Port = 17
>        User-Name = "test"
>        EAP-Message = 0x020100090174657374
>        Message-Authenticator = 0x40b01c65697a037c2aec79069d28d709
> +- entering group authorize
> ++[preprocess] returns ok
> ++[chap] returns noop
> ++[mschap] returns noop
> Waking up in 0.9 ! seconds.
> ++[unix] returns notfound
>    rlm_realm: No '@' in User-Name = "test", looking up realm NULL
>    rlm_realm: No such realm "NULL"
> ++[suffix] returns noop
>  rlm_eap: EAP packet type response id 1 length 9
>  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> ++[eap] returns updated
>    users: Matched entry test at line 93
>        expand: Hello, %{User-Name} -> Hello, test
> ++[files] returns ok
> ++[expiration] returns noop
> ++[logintime] returns noop
> rlm_pap: Found existing Auth-Type, not changing it.
> ++[pap] returns noop
>  rad_check_password:  Found Auth-Type EAP
> auth: type "EAP"
> +- entering group authenticate
>  rlm_eap: EAP Identity
>  rlm_eap: processing type tls
>  rl! m_eap_tls: Initiate
>  rlm_eap_tls: Start returned 1
> ; ++[eap] returns handled
> Sending Access-Challenge of id 0 to 10.1.254.38 port 49155
>        Reply-Message = "Hello, test"
>        EAP-Message = 0x010200061920
>        Message-Authenticator = 0x00000000000000000000000000000000
>        State = 0xf779e639f77bff0d3d2c202f1c7a8b9c
> Finished request 0.
> Going to the next request

---

Helping your favorite cause is as easy as instant messaging. You IM, we give. Learn more.