Copyright (C) 1999-2015 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/sql including configuration file /etc/freeradius/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/mods-enabled/eap including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/eap including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/radiusd" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client DIR-825 { ipaddr = 192.168.185.14 require_message_authenticator = no secret = <<< secret >>> shortname = "DIR-825" nas_type = "other" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client laptop { ipaddr = 192.168.185.66 require_message_authenticator = no secret = <<< secret >>> shortname = "laptop" nas_type = "other" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client dwl-2100ap { ipaddr = 192.168.185.8 require_message_authenticator = no secret = <<< secret >>> shortname = "dwl-2100ap" nas_type = "other" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = digest radiusd: #### Instantiating modules #### # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "192.168.185.3" port = 3306 login = "radius2" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 1024 } instantiate { } modules { # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "sql" from file /etc/freeradius/mods-enabled/sql rlm_sql_mysql: libmysql version: 5.5.46 mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10 # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" fragment_size = 1024 include_length = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 41462 Listening on proxy address :: port 46817 Ready to process requests (0) Received Access-Request Id 200 from 192.168.185.14:44608 to 192.168.185.5:1812 length 193 (0) User-Name = "lantronix2" (0) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2" (0) NAS-Port-Type = Wireless-802.11 (0) NAS-Port = 2 (0) Calling-Station-Id = "00-80-A3-90-BC-AF" (0) Connect-Info = "CONNECT 54Mbps 802.11g" (0) Acct-Session-Id = "55EB4736-0000002B" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1400 (0) EAP-Message = 0x029a000f016c616e74726f6e697832 (0) Message-Authenticator = 0x6fb20b06fcd25f825522f943220bf4f1 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (!&User-Name) { (0) if (!&User-Name) -> FALSE (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@.*@/ ) { (0) if (&User-Name =~ /@.*@/ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 154 length 15 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = EAP (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 155 length 22 (0) eap: EAP session adding &reply:State = 0x006adfa500f1db0d (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Sent Access-Challenge Id 200 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0 (0) EAP-Message = 0x019b00160410ddef0fae40446bc58c91c548aff715a9 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x006adfa500f1db0d001ce714062cb325 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 201 from 192.168.185.14:44608 to 192.168.185.5:1812 length 202 (1) User-Name = "lantronix2" (1) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2" (1) NAS-Port-Type = Wireless-802.11 (1) NAS-Port = 2 (1) Calling-Station-Id = "00-80-A3-90-BC-AF" (1) Connect-Info = "CONNECT 54Mbps 802.11g" (1) Acct-Session-Id = "55EB4736-0000002B" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1400 (1) EAP-Message = 0x029b00060319 (1) State = 0x006adfa500f1db0d001ce714062cb325 (1) Message-Authenticator = 0xa1cf2cfccb447c8b4ce1092b38657d34 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (!&User-Name) { (1) if (!&User-Name) -> FALSE (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@.*@/ ) { (1) if (&User-Name =~ /@.*@/ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 155 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) sql: EXPAND %{User-Name} (1) sql: --> lantronix2 (1) sql: SQL-User-Name set to 'lantronix2' rlm_sql (sql): Reserved connection (0) (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'lantronix2' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'lantronix2' ORDER BY id (1) sql: User found in radcheck table (1) sql: Conditional check items matched, merging assignment check items (1) sql: Cleartext-Password := "29jRd7F2" (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'lantronix2' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'lantronix2' ORDER BY id (1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (1) sql: --> SELECT groupname FROM radusergroup WHERE username = 'lantronix2' ORDER BY priority (1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'lantronix2' ORDER BY priority (1) sql: User not found in any groups rlm_sql (sql): Released connection (0) rlm_sql (sql): Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10 (1) [sql] = ok (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = EAP (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x006adfa500f1db0d (1) eap: Finished EAP session with state 0x006adfa500f1db0d (1) eap: Previous EAP request found for state 0x006adfa500f1db0d, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: Flushing SSL sessions (of #0) (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 156 length 6 (1) eap: EAP session adding &reply:State = 0x006adfa501f6c60d (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) Sent Access-Challenge Id 201 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0 (1) EAP-Message = 0x019c00061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x006adfa501f6c60d001ce714062cb325 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 202 from 192.168.185.14:44608 to 192.168.185.5:1812 length 266 (2) User-Name = "lantronix2" (2) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2" (2) NAS-Port-Type = Wireless-802.11 (2) NAS-Port = 2 (2) Calling-Station-Id = "00-80-A3-90-BC-AF" (2) Connect-Info = "CONNECT 54Mbps 802.11g" (2) Acct-Session-Id = "55EB4736-0000002B" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Framed-MTU = 1400 (2) EAP-Message = 0x029c00461900160302003b01000037030217aac2e5de5c46e5c08309c4f1db0dde1258531af8eebef6e16111dd769f06140000100013002f000a000400050060006400030100 (2) State = 0x006adfa501f6c60d001ce714062cb325 (2) Message-Authenticator = 0x2280ac094645529ac519a2c41cd8f101 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (!&User-Name) { (2) if (!&User-Name) -> FALSE (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@.*@/ ) { (2) if (&User-Name =~ /@.*@/ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 156 length 70 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = EAP (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x006adfa501f6c60d (2) eap: Finished EAP session with state 0x006adfa501f6c60d (2) eap: Previous EAP request found for state 0x006adfa501f6c60d, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: [eaptls verify] = ok (2) eap_peap: Done initial handshake (2) eap_peap: (other): before/accept initialization (2) eap_peap: TLS_accept: before/accept initialization (2) eap_peap: <<< TLS 1.1 [length 003b] (2) eap_peap: TLS_accept: SSLv3 read client hello A (2) eap_peap: >>> TLS 1.1 [length 004a] (2) eap_peap: TLS_accept: SSLv3 write server hello A (2) eap_peap: >>> TLS 1.1 [length 08d0] (2) eap_peap: TLS_accept: SSLv3 write certificate A (2) eap_peap: >>> TLS 1.1 [length 0004] (2) eap_peap: TLS_accept: SSLv3 write server done A (2) eap_peap: TLS_accept: SSLv3 flush data (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 157 length 1004 (2) eap: EAP session adding &reply:State = 0x006adfa502f7c60d (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) Sent Access-Challenge Id 202 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0 (2) EAP-Message = 0x019d03ec19c00000092d160302004a020000460302f91191cd9c547d9d29ef6353766c5b0c67de768be3e20919f6efdb77a57a958120c2974d708db1407fcb387c121ab8082ed833b0678a1c6546404361811ae1cfda002f0016030208d00b0008cc0008c90003de308203da308202c2a0030201020201 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x006adfa502f7c60d001ce714062cb325 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 203 from 192.168.185.14:44608 to 192.168.185.5:1812 length 202 (3) User-Name = "lantronix2" (3) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2" (3) NAS-Port-Type = Wireless-802.11 (3) NAS-Port = 2 (3) Calling-Station-Id = "00-80-A3-90-BC-AF" (3) Connect-Info = "CONNECT 54Mbps 802.11g" (3) Acct-Session-Id = "55EB4736-0000002B" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Framed-MTU = 1400 (3) EAP-Message = 0x029d00061900 (3) State = 0x006adfa502f7c60d001ce714062cb325 (3) Message-Authenticator = 0xdb36d2b7d887990713035212b210c9c5 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (!&User-Name) { (3) if (!&User-Name) -> FALSE (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@.*@/ ) { (3) if (&User-Name =~ /@.*@/ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 157 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = EAP (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x006adfa502f7c60d (3) eap: Finished EAP session with state 0x006adfa502f7c60d (3) eap: Previous EAP request found for state 0x006adfa502f7c60d, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 158 length 1000 (3) eap: EAP session adding &reply:State = 0x006adfa503f4c60d (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) Sent Access-Challenge Id 203 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0 (3) EAP-Message = 0x019e03e8194061d855b2d98842d7d1cd568da968b4c1f2ace37a6b81faea1f17696a80a7f41c6f0b847e3434fbe51966aa763374aa818b1433c3392c732cba407426e2aea04f20b0d8f1a3256aba8ef5d0a110c1327cf332bdf148b6146110440004e5308204e1308203c9a003020102020900d8494d2e (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x006adfa503f4c60d001ce714062cb325 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 204 from 192.168.185.14:44608 to 192.168.185.5:1812 length 202 (4) User-Name = "lantronix2" (4) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2" (4) NAS-Port-Type = Wireless-802.11 (4) NAS-Port = 2 (4) Calling-Station-Id = "00-80-A3-90-BC-AF" (4) Connect-Info = "CONNECT 54Mbps 802.11g" (4) Acct-Session-Id = "55EB4736-0000002B" (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027073 (4) Framed-MTU = 1400 (4) EAP-Message = 0x029e00061900 (4) State = 0x006adfa503f4c60d001ce714062cb325 (4) Message-Authenticator = 0xf52dd81ebe24b23dd4f8a376f39339d8 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (!&User-Name) { (4) if (!&User-Name) -> FALSE (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@.*@/ ) { (4) if (&User-Name =~ /@.*@/ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 158 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = EAP (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x006adfa503f4c60d (4) eap: Finished EAP session with state 0x006adfa503f4c60d (4) eap: Previous EAP request found for state 0x006adfa503f4c60d, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 159 length 367 (4) eap: EAP session adding &reply:State = 0x006adfa504f5c60d (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) Sent Access-Challenge Id 204 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0 (4) EAP-Message = 0x019f016f19004d2eb1e01d22300c0603551d13040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e636f6d2f6578616d706c655f63612e63726c300d06092a864886f70d01010b0500038201010046e4ab5ee46d3ed7fe88b21360ce57b835 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x006adfa504f5c60d001ce714062cb325 (4) Finished request Waking up in 4.8 seconds. (0) Cleaning up request packet ID 200 with timestamp +8 (1) Cleaning up request packet ID 201 with timestamp +8 (2) Cleaning up request packet ID 202 with timestamp +9 (3) Cleaning up request packet ID 203 with timestamp +9 (4) Cleaning up request packet ID 204 with timestamp +9 Ready to process requests (5) Received Access-Request Id 205 from 192.168.185.14:44608 to 192.168.185.5:1812 length 266 (5) User-Name = "lantronix2" (5) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2" (5) NAS-Port-Type = Wireless-802.11 (5) NAS-Port = 2 (5) Calling-Station-Id = "00-80-A3-90-BC-AF" (5) Connect-Info = "CONNECT 54Mbps 802.11g" (5) Acct-Session-Id = "55EB4736-0000002B" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027073 (5) Framed-MTU = 1400 (5) EAP-Message = 0x029f00461900160302003b010000370302fce1d33a46f4855f7ed253e529d9c7856394778c7f1a8f4024992852b5b24e130000100013002f000a000400050060006400030100 (5) State = 0x006adfa504f5c60d001ce714062cb325 (5) Message-Authenticator = 0xfd630279518887e001ba0d39cdc94ee6 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (!&User-Name) { (5) if (!&User-Name) -> FALSE (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@.*@/ ) { (5) if (&User-Name =~ /@.*@/ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 159 length 70 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = EAP (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x006adfa504f5c60d (5) eap: Finished EAP session with state 0x006adfa504f5c60d (5) eap: Previous EAP request found for state 0x006adfa504f5c60d, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: [eaptls verify] = ok (5) eap_peap: Done initial handshake (5) eap_peap: <<< TLS 1.1 [length 003b] (5) eap_peap: >>> TLS 1.1 [length 0002] (5) eap_peap: ERROR: TLS Alert write:fatal:handshake failure tls: TLS_accept: Error in SSLv3 read client hello C (5) eap_peap: ERROR: SSL says: error:1412E152:SSL routines:SSL_PARSE_CLIENTHELLO_TLSEXT:unsafe legacy renegotiation disabled (5) eap_peap: ERROR: SSL_read failed inside of TLS (-1), TLS session failed (5) eap_peap: ERROR: TLS receive handshake failed during operation (5) eap_peap: ERROR: [eaptls process] = fail (5) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (5) eap: Sending EAP Failure (code 4) ID 159 length 4 (5) eap: Failed in EAP select (5) [eap] = invalid (5) } # authenticate = invalid (5) Failed to authenticate the user (5) Login incorrect (eap_peap: TLS Alert write:fatal:handshake failure): [lantronix2/] (from client DIR-825 port 2 cli 00-80-A3-90-BC-AF) (5) Using Post-Auth-Type Reject (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) Post-Auth-Type REJECT { (5) sql: EXPAND .query (5) sql: --> .query (5) sql: Using query template 'query' rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 69 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 69 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 69 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 69 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Reserved connection (0) (5) sql: EXPAND %{User-Name} (5) sql: --> lantronix2 (5) sql: SQL-User-Name set to 'lantronix2' (5) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (5) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'lantronix2', '', 'Access-Reject', '2016-01-24 13:35:11') (5) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'lantronix2', '', 'Access-Reject', '2016-01-24 13:35:11') (5) sql: SQL query returned: success (5) sql: 1 record(s) updated rlm_sql (sql): Released connection (0) rlm_sql (sql): Need 1 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10 rlm_sql (sql): Closing connection (5): Hit idle_timeout, was idle for 61 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket (5) [sql] = ok (5) attr_filter.access_reject: EXPAND %{User-Name} (5) attr_filter.access_reject: --> lantronix2 (5) attr_filter.access_reject: Matched entry DEFAULT at line 11 (5) [attr_filter.access_reject] = updated (5) [eap] = noop (5) policy remove_reply_message_if_eap { (5) if (&reply:EAP-Message && &reply:Reply-Message) { (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (5) else { (5) [noop] = noop (5) } # else = noop (5) } # policy remove_reply_message_if_eap = noop (5) } # Post-Auth-Type REJECT = updated (5) Delaying response for 1.000000 seconds Waking up in 0.2 seconds. Waking up in 0.7 seconds. (5) Sending delayed response (5) Sent Access-Reject Id 205 from 192.168.185.5:1812 to 192.168.185.14:44608 length 44 (5) EAP-Message = 0x049f0004 (5) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (6) Received Access-Request Id 206 from 192.168.185.14:44608 to 192.168.185.5:1812 length 193 (6) User-Name = "lantronix2" (6) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2" (6) NAS-Port-Type = Wireless-802.11 (6) NAS-Port = 2 (6) Calling-Station-Id = "00-80-A3-90-BC-AF" (6) Connect-Info = "CONNECT 54Mbps 802.11g" (6) Acct-Session-Id = "55EB4736-0000002B" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027073 (6) Framed-MTU = 1400 (6) EAP-Message = 0x0226000f016c616e74726f6e697832 (6) Message-Authenticator = 0xf668f2b50e4dfb7c36cabdbe5ecffdad (6) # Executing section authorize from file /etc/freeradius/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (!&User-Name) { (6) if (!&User-Name) -> FALSE (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@.*@/ ) { (6) if (&User-Name =~ /@.*@/ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 38 length 15 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = EAP (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_md5 to process data (6) eap_md5: Issuing MD5 Challenge (6) eap: Sending EAP Request (code 1) ID 39 length 22 (6) eap: EAP session adding &reply:State = 0x7a364e987a114a40 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) Sent Access-Challenge Id 206 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0 (6) EAP-Message = 0x012700160410e92e75cfc04b53761f9e287782d27e3b (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x7a364e987a114a40d9aaba2a815a3350 (6) Finished request Waking up in 2.7 seconds. (7) Received Access-Request Id 207 from 192.168.185.14:44608 to 192.168.185.5:1812 length 202 (7) User-Name = "lantronix2" (7) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2" (7) NAS-Port-Type = Wireless-802.11 (7) NAS-Port = 2 (7) Calling-Station-Id = "00-80-A3-90-BC-AF" (7) Connect-Info = "CONNECT 54Mbps 802.11g" (7) Acct-Session-Id = "55EB4736-0000002B" (7) WLAN-Pairwise-Cipher = 1027076 (7) WLAN-Group-Cipher = 1027076 (7) WLAN-AKM-Suite = 1027073 (7) Framed-MTU = 1400 (7) EAP-Message = 0x022700060319 (7) State = 0x7a364e987a114a40d9aaba2a815a3350 (7) Message-Authenticator = 0xf9eae68ab9d334534770634209d04e7e (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (!&User-Name) { (7) if (!&User-Name) -> FALSE (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@.*@/ ) { (7) if (&User-Name =~ /@.*@/ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 39 length 6 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop (7) sql: EXPAND %{User-Name} (7) sql: --> lantronix2 (7) sql: SQL-User-Name set to 'lantronix2' rlm_sql (sql): Reserved connection (0) (7) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (7) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'lantronix2' ORDER BY id (7) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'lantronix2' ORDER BY id (7) sql: User found in radcheck table (7) sql: Conditional check items matched, merging assignment check items (7) sql: Cleartext-Password := "29jRd7F2" (7) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (7) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'lantronix2' ORDER BY id (7) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'lantronix2' ORDER BY id (7) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (7) sql: --> SELECT groupname FROM radusergroup WHERE username = 'lantronix2' ORDER BY priority (7) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'lantronix2' ORDER BY priority (7) sql: User not found in any groups rlm_sql (sql): Released connection (0) rlm_sql (sql): Need 1 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (7), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.185.3 via TCP/IP, server version 5.5.44-MariaDB-log, protocol version 10 (7) [sql] = ok (7) [expiration] = noop (7) [logintime] = noop (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = EAP (7) # Executing group from file /etc/freeradius/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x7a364e987a114a40 (7) eap: Finished EAP session with state 0x7a364e987a114a40 (7) eap: Previous EAP request found for state 0x7a364e987a114a40, released from the list (7) eap: Peer sent packet with method EAP NAK (3) (7) eap: Found mutually acceptable type PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Initiating new EAP-TLS session (7) eap_peap: [eaptls start] = request (7) eap: Sending EAP Request (code 1) ID 40 length 6 (7) eap: EAP session adding &reply:State = 0x7a364e987b1e5740 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/freeradius/sites-enabled/default (7) Sent Access-Challenge Id 207 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0 (7) EAP-Message = 0x012800061920 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x7a364e987b1e5740d9aaba2a815a3350 (7) Finished request Waking up in 2.6 seconds. (8) Received Access-Request Id 208 from 192.168.185.14:44608 to 192.168.185.5:1812 length 266 (8) User-Name = "lantronix2" (8) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2" (8) NAS-Port-Type = Wireless-802.11 (8) NAS-Port = 2 (8) Calling-Station-Id = "00-80-A3-90-BC-AF" (8) Connect-Info = "CONNECT 54Mbps 802.11g" (8) Acct-Session-Id = "55EB4736-0000002B" (8) WLAN-Pairwise-Cipher = 1027076 (8) WLAN-Group-Cipher = 1027076 (8) WLAN-AKM-Suite = 1027073 (8) Framed-MTU = 1400 (8) EAP-Message = 0x022800461900160302003b01000037030249b1f2df45fd4914ca43409946f3692230dd1c9230253e76f03063e54fed85a80000100013002f000a000400050060006400030100 (8) State = 0x7a364e987b1e5740d9aaba2a815a3350 (8) Message-Authenticator = 0x40591e833fe5574f06d97c73e4db9a35 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (!&User-Name) { (8) if (!&User-Name) -> FALSE (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@.*@/ ) { (8) if (&User-Name =~ /@.*@/ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 40 length 70 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = EAP (8) # Executing group from file /etc/freeradius/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x7a364e987b1e5740 (8) eap: Finished EAP session with state 0x7a364e987b1e5740 (8) eap: Previous EAP request found for state 0x7a364e987b1e5740, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: (other): before/accept initialization (8) eap_peap: TLS_accept: before/accept initialization (8) eap_peap: <<< TLS 1.1 [length 003b] (8) eap_peap: TLS_accept: SSLv3 read client hello A (8) eap_peap: >>> TLS 1.1 [length 004a] (8) eap_peap: TLS_accept: SSLv3 write server hello A (8) eap_peap: >>> TLS 1.1 [length 08d0] (8) eap_peap: TLS_accept: SSLv3 write certificate A (8) eap_peap: >>> TLS 1.1 [length 0004] (8) eap_peap: TLS_accept: SSLv3 write server done A (8) eap_peap: TLS_accept: SSLv3 flush data (8) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (8) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (8) eap_peap: In SSL Handshake Phase (8) eap_peap: In SSL Accept mode (8) eap_peap: [eaptls process] = handled (8) eap: Sending EAP Request (code 1) ID 41 length 1004 (8) eap: EAP session adding &reply:State = 0x7a364e98781f5740 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) Post-Auth-Type sub-section not found. Ignoring. (8) # Executing group from file /etc/freeradius/sites-enabled/default (8) Sent Access-Challenge Id 208 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0 (8) EAP-Message = 0x012903ec19c00000092d160302004a020000460302270864e7c1a7ea7c38125d72b7fa5a5bca7b443e168134d62b23536039f90ed220dd4a818eeeb8ab5accf56732182cad51c98dea944c285d3118c09334ccec552e002f0016030208d00b0008cc0008c90003de308203da308202c2a0030201020201 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x7a364e98781f5740d9aaba2a815a3350 (8) Finished request Waking up in 2.6 seconds. (9) Received Access-Request Id 209 from 192.168.185.14:44608 to 192.168.185.5:1812 length 202 (9) User-Name = "lantronix2" (9) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2" (9) NAS-Port-Type = Wireless-802.11 (9) NAS-Port = 2 (9) Calling-Station-Id = "00-80-A3-90-BC-AF" (9) Connect-Info = "CONNECT 54Mbps 802.11g" (9) Acct-Session-Id = "55EB4736-0000002B" (9) WLAN-Pairwise-Cipher = 1027076 (9) WLAN-Group-Cipher = 1027076 (9) WLAN-AKM-Suite = 1027073 (9) Framed-MTU = 1400 (9) EAP-Message = 0x022900061900 (9) State = 0x7a364e98781f5740d9aaba2a815a3350 (9) Message-Authenticator = 0x4f2ebfd3d3d09a85be04d1b0b3b1e1fb (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (!&User-Name) { (9) if (!&User-Name) -> FALSE (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@.*@/ ) { (9) if (&User-Name =~ /@.*@/ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /@\./) { (9) if (&User-Name =~ /@\./) -> FALSE (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 41 length 6 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = EAP (9) # Executing group from file /etc/freeradius/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x7a364e98781f5740 (9) eap: Finished EAP session with state 0x7a364e98781f5740 (9) eap: Previous EAP request found for state 0x7a364e98781f5740, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: Peer ACKed our handshake fragment (9) eap_peap: [eaptls verify] = request (9) eap_peap: [eaptls process] = handled (9) eap: Sending EAP Request (code 1) ID 42 length 1000 (9) eap: EAP session adding &reply:State = 0x7a364e98791c5740 (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) Post-Auth-Type sub-section not found. Ignoring. (9) # Executing group from file /etc/freeradius/sites-enabled/default (9) Sent Access-Challenge Id 209 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0 (9) EAP-Message = 0x012a03e8194061d855b2d98842d7d1cd568da968b4c1f2ace37a6b81faea1f17696a80a7f41c6f0b847e3434fbe51966aa763374aa818b1433c3392c732cba407426e2aea04f20b0d8f1a3256aba8ef5d0a110c1327cf332bdf148b6146110440004e5308204e1308203c9a003020102020900d8494d2e (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0x7a364e98791c5740d9aaba2a815a3350 (9) Finished request Waking up in 2.6 seconds. (10) Received Access-Request Id 210 from 192.168.185.14:44608 to 192.168.185.5:1812 length 202 (10) User-Name = "lantronix2" (10) Called-Station-Id = "00-18-E7-D4-37-D0:OpenWrt2" (10) NAS-Port-Type = Wireless-802.11 (10) NAS-Port = 2 (10) Calling-Station-Id = "00-80-A3-90-BC-AF" (10) Connect-Info = "CONNECT 54Mbps 802.11g" (10) Acct-Session-Id = "55EB4736-0000002B" (10) WLAN-Pairwise-Cipher = 1027076 (10) WLAN-Group-Cipher = 1027076 (10) WLAN-AKM-Suite = 1027073 (10) Framed-MTU = 1400 (10) EAP-Message = 0x022a00061900 (10) State = 0x7a364e98791c5740d9aaba2a815a3350 (10) Message-Authenticator = 0xb19ba679e7271294054abad6dd654964 (10) session-state: No cached attributes (10) # Executing section authorize from file /etc/freeradius/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (!&User-Name) { (10) if (!&User-Name) -> FALSE (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@.*@/ ) { (10) if (&User-Name =~ /@.*@/ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /@\./) { (10) if (&User-Name =~ /@\./) -> FALSE (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "lantronix2", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 42 length 6 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = EAP (10) # Executing group from file /etc/freeradius/sites-enabled/default (10) authenticate { (10) eap: Expiring EAP session with state 0x7a364e98791c5740 (10) eap: Finished EAP session with state 0x7a364e98791c5740 (10) eap: Previous EAP request found for state 0x7a364e98791c5740, released from the list (10) eap: Peer sent packet with method EAP PEAP (25) (10) eap: Calling submodule eap_peap to process data (10) eap_peap: Continuing EAP-TLS (10) eap_peap: Peer ACKed our handshake fragment (10) eap_peap: [eaptls verify] = request (10) eap_peap: [eaptls process] = handled (10) eap: Sending EAP Request (code 1) ID 43 length 367 (10) eap: EAP session adding &reply:State = 0x7a364e987e1d5740 (10) [eap] = handled (10) } # authenticate = handled (10) Using Post-Auth-Type Challenge (10) Post-Auth-Type sub-section not found. Ignoring. (10) # Executing group from file /etc/freeradius/sites-enabled/default (10) Sent Access-Challenge Id 210 from 192.168.185.5:1812 to 192.168.185.14:44608 length 0 (10) EAP-Message = 0x012b016f19004d2eb1e01d22300c0603551d13040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e636f6d2f6578616d706c655f63612e63726c300d06092a864886f70d01010b0500038201010046e4ab5ee46d3ed7fe88b21360ce57b835 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0x7a364e987e1d5740d9aaba2a815a3350 (10) Finished request Waking up in 2.6 seconds. (5) Cleaning up request packet ID 205 with timestamp +69 Waking up in 2.2 seconds. (6) Cleaning up request packet ID 206 with timestamp +72 (7) Cleaning up request packet ID 207 with timestamp +72 (8) Cleaning up request packet ID 208 with timestamp +72 (9) Cleaning up request packet ID 209 with timestamp +72 (10) Cleaning up request packet ID 210 with timestamp +72 Ready to process requests