Well, you don't have much say in this because NAS sends it that way:
rad_recv: Access-Request packet from host 172.30.0.142 port 6001, id=1,
length=69
User-Name = "00:19:79:0f:98:3d"
User-Password = "wireless"
NAS-IP-Address = 172.30.0.142
NAS-Port = 0
You see what is in the User-Name field? That's how mac authentication
works.
Ivan Kalik
Kalik Informatika ISP
Dana 8/9/2008, "Nataniel Klug" <nata@cnett.com.br> pi¹e:
Ivan,
I can't use User-Name as MAC becouse this is being used by another
systema I run... I just need to change some settings in dialup.conf to
meet my requirements, all said in other message.
tnt@kalik.net escreveu:
In mac authentication mac address is sent as User-Name not
Calling-Station-Id. You don't have to make any changes to dialup.conf -
just use database properly:
username: AA:AA:AA:AA:AA:AA
attribute: Auth-Type
op: :=
Value: Accept or Reject
Ivan Kalik
Kalik Informatika ISP
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html