I am having two problems and not sure where to look

From the Users file

userjeff Cleartext-Password := "BADPASS"

                Juniper-Local-User-Name = "engineer",

                Service-Type = Login-User,

                Reply-Message = "Hello, %{User-Name}",

                Fall-Through = Yes

1. With the DEFAULT Auth-Type = ntlm_auth

a. The nas gets an accept back but the attribute Juniper-Local-User-Name is not passed back
cat /var/log/radius/radacct/10.34.250.14/reply-detail-20101123

Tue Nov 23 15:44:34 2010

                Packet-Type = Access-Accept

2. With the DEFAULT Auth-Type = ntlm_auth commented out PAP isn’t happy and I get

eady to process requests.

rad_recv: Access-Request packet from host 10.34.250.14 port 62435, id=126, length=71

        User-Name = "userjeff"

        User-Password = "some_password"

        NAS-Identifier = "LKWDCO93S14-lab"

        NAS-IP-Address = 10.34.250.14

+- entering group authorize {...}

++[preprocess] returns ok

[auth_log]      expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.34.250.14/auth-detail-20101123

[auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.34.250.14/auth-detail-20101123

[auth_log]      expand: %t -> Tue Nov 23 15:57:13 2010

++[auth_log] returns ok

++[chap] returns noop

++[mschap] returns noop

[suffix] No '@' in User-Name = "userjeff", looking up realm NULL

[suffix] No such realm "NULL"

++[suffix] returns noop

[ntdomain] No '\' in User-Name = "userjeff", looking up realm NULL

[ntdomain] No such realm "NULL"

++[ntdomain] returns noop

[eap] No EAP-Message, not doing EAP

++[eap] returns noop

++[unix] returns notfound

[files] users: Matched entry userjeff at line 107

[files]         expand: Hello, %{User-Name} -> Hello, userjeff

++[files] returns ok

++[expiration] returns noop

++[logintime] returns noop

WARNING: Please update your configuration, and remove 'Auth-Type = Local'

WARNING: Use the PAP or CHAP modules instead.

User-Password in the request does NOT match "known good" password.

Failed to authenticate the user.

Login incorrect: [userjeff/some_password] (from client default-network port 0)

Using Post-Auth-Type Reject

+- entering group REJECT {...}

[attr_filter.access_reject]     expand: %{User-Name} -> userjeff

attr_filter: Matched entry DEFAULT at line 11

++[attr_filter.access_reject] returns updated

Delaying reject of request 0 for 1 seconds

Going to the next request

Waking up in 0.9 seconds.

Sending delayed reject for request 0

Sending Access-Reject of id 126 to 10.34.250.14 port 62435

        Reply-Message = "Hello, userjeff"

From radius –X

ad_recv: Access-Request packet from host 10.34.250.14 port 51941, id=158, length=71

        User-Name = "userjeff"

        User-Password = "some_password"

        NAS-Identifier = "LKWDCO93S14-lab"

        NAS-IP-Address = 10.34.250.14

+- entering group authorize {...}

++[preprocess] returns ok

[auth_log]      expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.34.250.14/auth-detail-20101123

[auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.34.250.14/auth-detail-20101123

[auth_log]      expand: %t -> Tue Nov 23 15:44:34 2010

++[auth_log] returns ok

++[chap] returns noop

++[mschap] returns noop

[suffix] No '@' in User-Name = "userjeff", looking up realm NULL

[suffix] No such realm "NULL"

++[suffix] returns noop

[ntdomain] No '\' in User-Name = "userjeff", looking up realm NULL

[ntdomain] No such realm "NULL"

++[ntdomain] returns noop

[eap] No EAP-Message, not doing EAP

++[eap] returns noop

++[unix] returns notfound

[files] users: Matched entry DEFAULT at line 94

++[files] returns ok

++[expiration] returns noop

++[logintime] returns noop

Found Auth-Type = ntlm_auth

+- entering group authenticate {...}

[ntlm_auth]     expand: --username=%{mschap:User-Name} -> --username=userjeff

[ntlm_auth]     expand: --password=%{User-Password} -> --password=some_password

Exec-Program output: NT_STATUS_OK: Success (0x0)

Exec-Program-Wait: plaintext: NT_STATUS_OK: Success (0x0)

Exec-Program: returned: 0

++[ntlm_auth] returns ok

Login OK: [userjeff] (from client default-network port 0)

+- entering group post-auth {...}

[reply_log]     expand: /var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d -> /var/log/radius/radacct/10.34.250.14/reply-detail-20101123

[reply_log] /var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d expands to /var/log/radius/radacct/10.34.250.14/reply-detail-20101123

[reply_log]     expand: %t -> Tue Nov 23 15:44:34 2010

++[reply_log] returns ok

++[exec] returns noop

Sending Access-Accept of id 158 to 10.34.250.14 port 51941

Finished request 0.

Going to the next request

Waking up in 4.9 seconds.

Cleaning up request 0 ID 158 with timestamp +15

Ready to process requests.