I believe you can only use the actual vid and not a vlan name (i.e. VLAN_200) in the vlan and access lists. At least under the older TDD builds this is the case, so I presume the same limitations apply to the 16e services.

Ben

On Tue, Dec 14, 2010 at 6:59 AM, Wilson, Stuart <swilso19@harris.com> wrote:

I cannot get our Alvarion BS to assign service profiles to a MS. I have read the forums and tried to use that information to help, but I cannot get a service profile to be assigned. Our setup is as follows:

FreeRADIUS AAA with MySQL database.

The radgroupreply is: 

8 | MLB_MS    | Filter-ID         | =  | "n=sp1:v=<VLAN_200>:h=OFF:a=<ON,VLAN_200>:c=ON"   

The radusergroup is:

 

MLB_LAB_MS2@WiMax.com        | MLB_MS    |        1 |

a sample from radiusd -x

Access-Request:

 Access-Request packet from host 192.168.254.253 port 49154, id=109, length=258

        User-Name = "{am=1}6ced97d91a6fcef3419e70f9c7ff34c1@WiMax.com"

        NAS-IP-Address = 192.168.254.253

        NAS-Port-Type = 27

        NAS-Port = 3

        Calling-Station-Id = "\000\020\347A\\d"

        NAS-Identifier = "002002002000065002"

        WiMAX-GMT-Timezone-offset = 18000

        Framed-MTU = 1490

        Service-Type = Framed-User

        WiMAX-Release = "1.0"

        WiMAX-Accounting-Capabilities = IP-Session-Based

        WiMAX-BS-Id = 0x303032303032303032303030303635303032

        EAP-Message = 0x02010035017b616d3d317d36636564393764393161366663656633343139653730663963376666333463314057694d61782e636f6d

        Message-Authenticator = 0x4277326335201e6d8fa3f8a26a9311d7

Access-Accept:

Sending Access-Accept of id 108 to 192.168.254.253 port 49154

        Filter-Id = "n=sp1:v=<VLAN_200>:h=OFF:a=<ON,VLAN_200>:c=OFF"

        WiMAX-FA-RK-Key = 0x00

        WiMAX-MSK = 0x

TTLS Reply:

[ttls] Got tunneled reply code 2

        Filter-Id = "n=sp1:v=<VLAN_200>:h=OFF:a=<ON,VLAN_200>:c=ON"

        MS-CHAP2-Success = 0x98533d41334643344439373546424136454339433135323941323643313844373437434542313443453330

        MS-MPPE-Recv-Key = 0x095bfcafbd7e6970eb5762a77b159f59

        MS-MPPE-Send-Key = 0x4d060be03b8d2c8939627ade2f95c539

        MS-MPPE-Encryption-Policy = 0x00000001

        MS-MPPE-Encryption-Types = 0x00000006

The most helpful information would be a guide on how to configure FreeRADIUS and the associated MySQL server to apply a service profile to a MS.

Thanks for the help.

Stuart Wilson

Email: swilso19@harris.com


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html