Hi everyone,
I managed to install Freeradius with OpenSSL under Debian Lenny and it did work like a charm for a while. However, after I did the same process of installation in another virtualbox machine, it has not worked anymore. The console log report the following error:
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
The complete log is:
xmobileb155ce:~# freeradius -X
FreeRADIUS Version 2.1.8, for host i486-pc-linux-gnu, built on Mar 18 2010 at 04:07:54
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/001mschap-default
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/001ntlm_auth-default
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/innet-tunnel-default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/default-default
main {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = no
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client WiFi Network/24 {
require_message_authenticator = no
secret = "alejandro"
shortname = "N1P2"
}
client AP's IP_ADD {
require_message_authenticator = no
secret = "alejandro"
shortname = "mw-ltqFreeradius-N1-P2-01"
nastype = "other"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MI_DOMINIO} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
}
Module: Linked to module rlm_unix
Module: Instantiating unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/privkey.pem"
certificate_file = "/etc/freeradius/certs/cert.pem"
CA_file = "/etc/freeradius/certs/cacert.pem"
private_key_password = "alejandro"
dh_file = "/etc/freeradius/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/freeradius/certs/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/etc/freeradius/users"
acctusersfile = "/etc/freeradius/acct_users"
preproxy_usersfile = "/etc/freeradius/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
attr_filter attr_filter.access_reject {
attrsfile = "/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
}
} # modules
} # server
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Instantiating ntlm_auth
exec ntlm_auth {
wait = yes
program = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MI_DOMINIO} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
input_pairs = "request"
shell_escape = yes
}
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
server {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/etc/freeradius/huntgroups"
hints = "/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating attr_filter.accounting_response
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host AP's IP_ADD port 1044, id=0, length=211
Message-Authenticator = 0x93930a64fe55679bbf166346dd01c8ee
Service-Type = Framed-User
User-Name = "MI_DOMINIO\\ORTEGACA"
Framed-MTU = 1488
Called-Station-Id = "00-18-39-1B-B3-F1:freeradiusg"
Calling-Station-Id = "00-1F-3C-2D-62-C1"
NAS-Identifier = "WAP55AG"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x02000017015044565341323030305c4f52544547414341
NAS-IP-Address = AP's IP_ADD
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "MI_DOMINIO\ORTEGACA", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 0 length 23
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 0 to AP's IP_ADD port 1044
EAP-Message = 0x010100061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x3f0f6ba03f0e72e0b3955098d1e297ca
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host AP's IP_ADD port 1044, id=1, length=286
Message-Authenticator = 0xe90497c13c690e16d5485c28de3e9496
Service-Type = Framed-User
User-Name = "MI_DOMINIO\\ORTEGACA"
Framed-MTU = 1488
State = 0x3f0f6ba03f0e72e0b3955098d1e297ca
Called-Station-Id = "00-18-39-1B-B3-F1:freeradiusg"
Calling-Station-Id = "00-1F-3C-2D-62-C1"
NAS-Identifier = "WAP55AG"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x0201005019800000004616030100410100003d03014c2df82b1aaab762c4848152fd27fc2bf58bd616a171819685cdabc06742c01900001600040005000a000900640062000300060013001200630100
NAS-IP-Address = AP's IP_ADD
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "MI_DOMINIO\ORTEGACA", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 80
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 70
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] (other): before/accept initialization
[peap] TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 0041], ClientHello
[peap] TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 002a], ServerHello
[peap] TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 06da], Certificate
[peap] TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap] TLS_accept: SSLv3 write server done A
[peap] TLS_accept: SSLv3 flush data
[peap] TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 1 to AP's IP_ADD port 1044
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0x312e70647673612e636f6d31
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x3f0f6ba03e0d72e0b3955098d1e297ca
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host AP's IP_ADD port 1044, id=2, length=212
Message-Authenticator = 0xf5bf8d910858176aa660a0b84bb59a47
Service-Type = Framed-User
User-Name = "MI_DOMINIO\\ORTEGACA"
Framed-MTU = 1488
State = 0x3f0f6ba03e0d72e0b3955098d1e297ca
Called-Station-Id = "00-18-39-1B-B3-F1:freeradiusg"
Calling-Station-Id = "00-1F-3C-2D-62-C1"
NAS-Identifier = "WAP55AG"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020200061900
NAS-IP-Address = AP's IP_ADD
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "MI_DOMINIO\ORTEGACA", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 2 to AP's IP_ADD port 1044
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0xe0f8ab382e453520b31f1571471622b3b167ad75a49437a3155d091693e09f027deedc3d875a9d16030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x3f0f6ba03d0c72e0b3955098d1e297ca
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host AP's IP_ADD port 1044, id=3, length=212
Message-Authenticator = 0x816e317a044a6cc3f91a7f579f6126d5
Service-Type = Framed-User
User-Name = "MI_DOMINIO\\ORTEGACA"
Framed-MTU = 1488
State = 0x3f0f6ba03d0c72e0b3955098d1e297ca
Called-Station-Id = "00-18-39-1B-B3-F1:freeradiusg"
Calling-Station-Id = "00-1F-3C-2D-62-C1"
NAS-Identifier = "WAP55AG"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020300061900
NAS-IP-Address = AP's IP_ADD
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "MI_DOMINIO\ORTEGACA", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 3 to AP's IP_ADD port 1044
EAP-Message = 0x010400061900
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x3f0f6ba03c0b72e0b3955098d1e297ca
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 0 ID 0 with timestamp +0
Cleaning up request 1 ID 1 with timestamp +0
Cleaning up request 2 ID 2 with timestamp +0
Cleaning up request 3 ID 3 with timestamp +0
Ready to process requests.
^C
xmobileb155ce:~#
Some help is appreciate.
Regards,
Cesar
Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! Try it!
Explore the seven wonders of the world Learn more!