Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/raddb/proxy.conf
Config: including file: /etc/raddb/clients.conf
Config: including file: /etc/raddb/snmp.conf
Config: including file: /etc/raddb/eap.conf
Config: including file: /etc/raddb/sql.conf
main: prefix = "/usr/local"
main: localstatedir = "/var"
main: logdir = "/var/log/radius"
main: libdir = "/usr/local/lib"
main: radacctdir = "/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius/radius.log"
main: log_auth = yes
main: log_auth_badpass = yes
main: log_auth_goodpass = yes
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = yes
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded System
unix: cache = no
unix: passwd = "/etc/passwd"
unix: shadow = "/etc/shadow"
unix: group = "/etc/group"
unix: radwtmp = "/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "tls"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file = "/var/ssl/fedora.pem"
tls: certificate_file = "/var/ssl/fedora.pem"
tls: CA_file = "/var/ssl/root.pem"
tls: private_key_password = "defcon1"
tls: dh_file = "/var/ssl/dh"
tls: random_file = "/var/ssl/random-data.bin"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = no
tls: check_cert_cn = "(null)"
rlm_eap: Loaded and initialized type tls
ttls: default_eap_type = "md5"
ttls: copy_request_to_tunnel = no
ttls: use_tunneled_reply = no
rlm_eap: Loaded and initialized type ttls
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/raddb/huntgroups"
preprocess: hints = "/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/etc/raddb/users"
files: acctusersfile = "/etc/raddb/acct_users"
files: preproxy_usersfile = "/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.11.1:2048, id=0, length=141
User-Name = "Jurgen Tessers"
NAS-IP-Address = 192.168.11.1
Called-Station-Id = "001217374d34"
Calling-Station-Id = "00904bfa38fd"
NAS-Identifier = "001217374d34"
NAS-Port = 63
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x02000013014a757267656e2054657373657273
Message-Authenticator = 0x42efd7eecba0f25f6b411ac57d7ea548
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
rlm_realm: No '@' in User-Name = "Jurgen Tessers", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 0 length 19
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched entry Jurgen Tessers at line 98
modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns updated for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Requiring client certificate
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 0
modcall: group authenticate returns handled for request 0
Sending Access-Challenge of id 0 to 192.168.11.1:2048
EAP-Message = 0x010100060d20
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x758c6f33ed1109d20b05b81c96e35e69
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.11.1:2048, id=0, length=220
User-Name = "Jurgen Tessers"
NAS-IP-Address = 192.168.11.1
Called-Station-Id = "001217374d34"
Calling-Station-Id = "00904bfa38fd"
NAS-Identifier = "001217374d34"
NAS-Port = 63
Framed-MTU = 1400
State = 0x758c6f33ed1109d20b05b81c96e35e69
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020100500d800000004616030100410100003d03014348fba69c26178521b8234e0344fe364cd297c8175c9b9fc78b1e1b493124bd00001600040005000a000900640062000300060013001200630100
Message-Authenticator = 0xe525ae2f6a17af6807c4cba4672d8cfe
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
rlm_realm: No '@' in User-Name = "Jurgen Tessers", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 1 length 80
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
users: Matched entry Jurgen Tessers at line 98
modcall[authorize]: module "files" returns ok for request 1
modcall: group authorize returns updated for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: Request found, released from the list
rlm_eap: EAP/tls
rlm_eap: processing type tls
rlm_eap_tls: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
TLS_accept: SSLv3 read client hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
TLS_accept: SSLv3 write server hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 02ed], Certificate
TLS_accept: SSLv3 write certificate A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 00b6], CertificateRequest
TLS_accept: SSLv3 write certificate request A
TLS_accept: SSLv3 flush data
In SSL Handshake Phase
In SSL Accept mode
eaptls_process returned 13
modcall[authenticate]: module "eap" returns handled for request 1
modcall: group authenticate returns handled for request 1
Sending Access-Challenge of id 0 to 192.168.11.1:2048
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0x6d65656e406368656c6c6f2e6e6c0e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xc726a400fa2291a52450d13323be42d4
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.11.1:2048, id=0, length=146
User-Name = "Jurgen Tessers"
NAS-IP-Address = 192.168.11.1
Called-Station-Id = "001217374d34"
Calling-Station-Id = "00904bfa38fd"
NAS-Identifier = "001217374d34"
NAS-Port = 63
Framed-MTU = 1400
State = 0xc726a400fa2291a52450d13323be42d4
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020200060d00
Message-Authenticator = 0x054ce4d4cd628812e4711d357c4fddc7
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
rlm_realm: No '@' in User-Name = "Jurgen Tessers", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: EAP packet type response id 2 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 2
users: Matched entry Jurgen Tessers at line 98
modcall[authorize]: module "files" returns ok for request 2
modcall: group authorize returns updated for request 2
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
rlm_eap: Request found, released from the list
rlm_eap: EAP/tls
rlm_eap: processing type tls
rlm_eap_tls: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
modcall[authenticate]: module "eap" returns handled for request 2
modcall: group authenticate returns handled for request 2
Sending Access-Challenge of id 0 to 192.168.11.1:2048
EAP-Message = 0x0103000a0d8000000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x01a742a626d26fb7df45c5d4fc5ecdd1
Finished request 2
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 2 ID 0 with timestamp 4348fbce
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 192.168.11.1:2048, id=0, length=141
User-Name = "Jurgen Tessers"
NAS-IP-Address = 192.168.11.1
Called-Station-Id = "001217374d34"
Calling-Station-Id = "00904bfa38fd"
NAS-Identifier = "001217374d34"
NAS-Port = 63
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x02010013014a757267656e2054657373657273
Message-Authenticator = 0x2d3a178165a103c97790a2265f4d9d94
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
modcall[authorize]: module "preprocess" returns ok for request 3
rlm_realm: No '@' in User-Name = "Jurgen Tessers", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 3
rlm_eap: EAP packet type response id 1 length 19
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 3
users: Matched entry Jurgen Tessers at line 98
modcall[authorize]: module "files" returns ok for request 3
modcall: group authorize returns updated for request 3
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 3
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Requiring client certificate
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 3
modcall: group authenticate returns handled for request 3
Sending Access-Challenge of id 0 to 192.168.11.1:2048
EAP-Message = 0x010200060d20
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xeae76b6fc48204bc626dc0cf8ee55037
Finished request 3
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.11.1:2048, id=0, length=220
User-Name = "Jurgen Tessers"
NAS-IP-Address = 192.168.11.1
Called-Station-Id = "001217374d34"
Calling-Station-Id = "00904bfa38fd"
NAS-Identifier = "001217374d34"
NAS-Port = 63
Framed-MTU = 1400
State = 0xeae76b6fc48204bc626dc0cf8ee55037
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020200500d800000004616030100410100003d03014348fbc478dfe6e9659dc502bd26acfcd57a22745369041bda99d550e1a50e0100001600040005000a000900640062000300060013001200630100
Message-Authenticator = 0xcf01888715ab7f343baf3bc2ff254d6d
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
modcall[authorize]: module "preprocess" returns ok for request 4
rlm_realm: No '@' in User-Name = "Jurgen Tessers", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 4
rlm_eap: EAP packet type response id 2 length 80
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 4
users: Matched entry Jurgen Tessers at line 98
modcall[authorize]: module "files" returns ok for request 4
modcall: group authorize returns updated for request 4
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
rlm_eap: Request found, released from the list
rlm_eap: EAP/tls
rlm_eap: processing type tls
rlm_eap_tls: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
TLS_accept: SSLv3 read client hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
TLS_accept: SSLv3 write server hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 02ed], Certificate
TLS_accept: SSLv3 write certificate A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 00b6], CertificateRequest
TLS_accept: SSLv3 write certificate request A
TLS_accept: SSLv3 flush data
TLS_accept:error in SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
eaptls_process returned 13
modcall[authenticate]: module "eap" returns handled for request 4
modcall: group authenticate returns handled for request 4
Sending Access-Challenge of id 0 to 192.168.11.1:2048
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0x6d65656e406368656c6c6f2e6e6c0e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf682d06956d504942902019d3bd263c0
Finished request 4
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.11.1:2048, id=0, length=146
User-Name = "Jurgen Tessers"
NAS-IP-Address = 192.168.11.1
Called-Station-Id = "001217374d34"
Calling-Station-Id = "00904bfa38fd"
NAS-Identifier = "001217374d34"
NAS-Port = 63
Framed-MTU = 1400
State = 0xf682d06956d504942902019d3bd263c0
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020300060d00
Message-Authenticator = 0x70679a8fd948dfe126165b99f9dd1b18
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
modcall[authorize]: module "preprocess" returns ok for request 5
rlm_realm: No '@' in User-Name = "Jurgen Tessers", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 5
rlm_eap: EAP packet type response id 3 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 5
users: Matched entry Jurgen Tessers at line 98
modcall[authorize]: module "files" returns ok for request 5
modcall: group authorize returns updated for request 5
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
rlm_eap: Request found, released from the list
rlm_eap: EAP/tls
rlm_eap: processing type tls
rlm_eap_tls: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
modcall[authenticate]: module "eap" returns handled for request 5
modcall: group authenticate returns handled for request 5
Sending Access-Challenge of id 0 to 192.168.11.1:2048
EAP-Message = 0x0104000a0d8000000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x2bfb625aa5787818e9adeb602d7eedf8
Finished request 5
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 5 ID 0 with timestamp 4348fbec
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 192.168.11.1:2048, id=0, length=141
User-Name = "Jurgen Tessers"
NAS-IP-Address = 192.168.11.1
Called-Station-Id = "001217374d34"
Calling-Station-Id = "00904bfa38fd"
NAS-Identifier = "001217374d34"
NAS-Port = 63
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x02010013014a757267656e2054657373657273
Message-Authenticator = 0x73f093669adbb4d2de364948a9ba07c5
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
modcall[authorize]: module "preprocess" returns ok for request 6
rlm_realm: No '@' in User-Name = "Jurgen Tessers", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 6
rlm_eap: EAP packet type response id 1 length 19
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 6
users: Matched entry Jurgen Tessers at line 98
modcall[authorize]: module "files" returns ok for request 6
modcall: group authorize returns updated for request 6
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Requiring client certificate
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 6
modcall: group authenticate returns handled for request 6
Sending Access-Challenge of id 0 to 192.168.11.1:2048
EAP-Message = 0x010200060d20
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x97c1db6e5349aa2f0ea68769670a22db
Finished request 6
Going to the next request