Hi experts,

I’m getting really frustrated on this… I had the server rebuilt with REHL 5 and FreeRadius2.1.7. It was running REHL 4 with FreeRadius2.1.6. It looks like the server will send the last “challenge” and the client won’t reply anymore… The ntlm_auth part should be working right because when I do “radtest 'gtcorp\\dzhao' <password> localhost 0 test123” it works fine…

Sending Access-Request of id 119 to 127.0.0.1 port 1812

        User-Name = "gtcorp\\dzhao"

        User-Password = "<password>"

        NAS-IP-Address = 10.26.105.105

        NAS-Port = 0

rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=119, length=41

        Tunnel-Type:0 = VLAN

        Tunnel-Medium-Type:0 = IEEE-802

        Tunnel-Private-Group-Id:0 = "3"

        Tunnel-Preference:0 = 0

However it’s not working when I have a laptop plugged in doing PEAP/802.1x with the same user account… The debug output is attached.  Please help!! Thanks!!!

Difan Zhao, M.Eng Network Engineer Guest-Tek Interactive Entertainment Inc.
Email: difan.zhao@guest-tek.com Office: +1 (403) 509 1010 ext 3048 Cell: +1 (403) 689 7514 www.guest-tek.com
	INTERNET | MEDIA | VOICE
The contents of this email are confidential and intended for the recipient only. If you have received this email in error, please notify us, and destroy all copies.