wpa_cli -iwlan0 disconnect
for i in `wpa_cli -iwlan0 list_networks | grep ^[0-9] | cut -f1`; do wpa_cli -iwlan0 remove_network $i; done
wpa_cli -iwlan0 add_network
wpa_cli -iwlan0 set_network 0 auth_alg OPEN
wpa_cli -iwlan0 set_network 0 key_mgmt WPA-EAP
wpa_cli -iwlan0 set_network 0 pairwise TKIP
wpa_cli -iwlan0 set_network 0 group TKIP
wpa_cli -iwlan0 set_network 0 proto WPA
wpa_cli -iwlan0 set_network 0 eap PEAP
wpa_cli -iwlan0 set_network 0 identity '"beacon"'
wpa_cli -iwlan0 set_network 0 password '"12345678"'
wpa_cli -iwlan0 set_network 0 phase1 '"peapver=0"'
wpa_cli -iwlan0 set_network 0 phase2 '"MSCHAPV2"'
wpa_cli -iwlan0 set_network 0 mode 0
wpa_cli -iwlan0 set_network 0 ssid '"Redeye"'
wpa_cli -iwlan0 select_network 0
wpa_cli -iwlan0 enable_network 0
wpa_cli -iwlan0 reassociate
wpa_cli -iwlan0 status
iw wlan0 link


Then for IP assigning I use
udhcpc -i wlan0 

Which keeps on saying 
Sending discover ...