Thanks Ivan,

I am a little concerned with that as we have about 20 NASes and a national Dialup plan (unknown amount of NASs). Can you assign multiple groups to a user where in each group it will look for the "NAS-Port-Type?"

If I can at least distinguish between Async and Ethernet then I can work around the VPN stuff.

Thanks,

On Mon, Jun 29, 2009 at 6:00 PM, Ivan Kalik <tnt@kalik.net> wrote:

> I am curious to understand the best means of providing multiple service
> authentications, such as PPPoE, Dialup, VPN, etc, via one login and
> password. I have seen it done before by NAS-IP-Address but it would quite
> cumbersome in our network. I was fooling around with the "NAS-Port-Type"
> but
> am having mixed results. Is there a better way to determine the type of
> service?

The only other thing that might distingush between those options would be
Calling-Station-Id. For PPPoE it should be mac address, for VPN IP address
and for dial phone number.

Ivan Kalik
Kalik Informatika ISP

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

--
Nick Huanca
Inside Plant Manager

GAW High-Speed Internet
1300 Putney Rd
Brattleboro, VT 05301

[offices] (877) 220-2873
[direct] (802) 246-1192 x214
[mobile] (802) 380-7339
www.gaw.com
---
PRIVACY AND CONFIDENTIALITY NOTICE: This communication and any files transmitted with it are for the sole use of the intended recipient(s) and may contain confidential, proprietary and/or legally privileged or protected information. If you believe you have received this communication in error, please immediately reply to the sender and delete this message. Any use, disclosure, retransmission, distribution, copying, or taking of any action based on this information by any person or entity other than the intended recipient is strictly prohibited and may be unlawful. Because e-mail can be altered electronically, the integrity of this communication cannot be guaranteed.