Hi all,


Still could not get "Class" Attribute in my accounting data.
Should be defining it from "acct_users" right ? Or shoul NAS asked that "Class" Attrribute ?


rad_recv: Accounting-Request packet from host 103.247.123.158 port 40101, id=170, length=253

Service-Type = Framed-User

Framed-Protocol = PPP

NAS-Port = 420725

NAS-Port-Type = Ethernet

User-Name = "franky@yustanto.com"

Calling-Station-Id = "D4:CA:6D:D8:92:78"

Called-Station-Id = "PPPoE.Service.Vlan100"

NAS-Port-Id = "vlan100"

MS-CHAP-Domain = "yustanto.com"

Acct-Session-Id = "81b00e94"

Framed-IP-Address = 103.247.123.47

Acct-Authentic = RADIUS

Event-Timestamp = "Jan 29 2014 11:24:05 WIT"

Acct-Session-Time = 1800

Acct-Input-Octets = 710

Acct-Input-Gigawords = 0

Acct-Input-Packets = 21

Acct-Output-Octets = 722

Acct-Output-Gigawords = 0

Acct-Output-Packets = 21

Acct-Status-Type = Interim-Update

NAS-Identifier = "DR2.SMG"

Acct-Delay-Time = 0

Mikrotik-Realm = "yustanto.com"

NAS-IP-Address = 103.247.123.158

+- entering group preacct {...}

Have been google it, and still can find out, please help give a clue.
I'm desperate ...

Thanks




On Sun, Jan 26, 2014 at 8:05 PM, Alan Buxey <A.L.M.Buxey@lboro.ac.uk> wrote:
Hi

I'd suggest that you start by reading the available documentation... and maybe buy a book. You'll know that it is working by looking at the debug output of freeradius .. and hopefully the debug/logs/interface of your NAS. Then if there are still issues you ask questions relevant to the issue.

Alan