radiusd: FreeRADIUS Version 3.0.1, for host x86_64-pc-linux-gnu, built on Apr 15 2014 at 14:04:23
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/dhcp
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/sql
including configuration file /etc/freeradius/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/freeradius/mods-enabled/sqlcounter
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/perl
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/mschap
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/accounting
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
 security {
 	user = "freerad"
 	group = "freerad"
 	allow_core_dumps = no
 }
}
main {
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	sbindir = "/usr/sbin"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
	libdir = "/usr/lib/freeradius"
	radacctdir = "/var/log/freeradius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 1024
	pidfile = "/var/run/freeradius/freeradius.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = no
 log {
 	stripped_names = no
 	auth = no
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 }
 security {
 	max_attributes = 200
 	reject_delay = 1
 	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
 	retry_delay = 5
 	retry_count = 3
 	default_fallback = no
 	dead_time = 120
 	wake_all_if_all_dead = no
 }
 home_server localhost {
 	ipaddr = 127.0.0.1
 	port = 1812
 	type = "auth"
 	secret = "testing123"
 	response_window = 20
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_interval = 30
 	num_answers_to_alive = 3
 	revive_interval = 120
 	status_check_timeout = 4
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = "radius"
 	shortname = "localhost"
 	nas_type = "other"
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client 27.33.228.125 {
 	require_message_authenticator = no
 	secret = "radius"
 	shortname = "14kimberleyst"
 	nas_type = "mikrotik"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client 220.244.108.10 {
 	require_message_authenticator = no
 	secret = "radius"
 	shortname = "30cookst"
 	nas_type = "mikrotik_snmp"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client 10.1.1.22/24 {
 	require_message_authenticator = no
 	secret = "radius"
 	shortname = "MikroTik"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client 99hamilton.no-ip.biz {
 	require_message_authenticator = no
 	secret = "radius"
 	shortname = "99hamilton"
 	nas_type = "mikrotik"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
radiusd: #### Instantiating modules ####
 instantiate {
  # Loaded module rlm_sqlcounter
  # Instantiating module "dailycounter" from file /etc/freeradius/mods-enabled/sqlcounter
  sqlcounter dailycounter {
  	sql_module_instance = "sql"
  	key = "User-Name"
  	query = "SELECT IFNULL(TIME_TO_SEC(TIMEDIFF(NOW(), MIN(AcctStartTime))),0) FROM `radacct` WHERE UserName='%{User-Name}' ORDER BY AcctStartTime LIMIT 1;"
  	reset = "daily"
  	counter_name = "Daily-Session-Time"
  	check_name = "Max-Daily-Session"
  	reply_name = "Session-Timeout"
  }
rlm_sqlcounter: Current Time: 1400023651 [2014-05-14 07:27:31], Next reset 1400083200 [2014-05-15 00:00:00]
rlm_sqlcounter: Current Time: 1400023651 [2014-05-14 07:27:31], Prev reset 1399996800 [2014-05-14 00:00:00]
 }
 modules {
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
  eap {
  	default_eap_type = "md5"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	mod_accounting_username_bug = no
  	max_sessions = 4096
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
   	challenge = "Password: "
   	auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
   	tls = "tls-common"
   }
   tls-config tls-common {
   	rsa_key_exchange = no
   	dh_key_exchange = yes
   	rsa_key_length = 512
   	dh_key_length = 512
   	verify_depth = 0
   	ca_path = "/etc/freeradius/certs"
   	pem_file_type = yes
   	private_key_file = "/etc/freeradius/certs/server.pem"
   	certificate_file = "/etc/freeradius/certs/server.pem"
   	ca_file = "/etc/freeradius/certs/ca.pem"
   	private_key_password = "whatever"
   	dh_file = "/etc/freeradius/certs/dh"
   	fragment_size = 1024
   	include_length = yes
   	check_crl = no
   	cipher_list = "DEFAULT"
   	ecdh_curve = "prime256v1"
    cache {
    	enable = yes
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    }
    ocsp {
    	enable = no
    	override_cert_url = yes
    	url = "http://127.0.0.1/ocsp/"
    	use_nonce = yes
    	timeout = 0
    	softfail = yes
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
   	tls = "tls-common"
   	default_eap_type = "md5"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	virtual_server = "inner-tunnel"
   	include_length = yes
   	require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
   	tls = "tls-common"
   	default_method = "mschapv2"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	proxy_tunneled_request_as_eap = yes
   	virtual_server = "inner-tunnel"
   	soh = no
   	require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
   	with_ntdomain_hack = no
   	send_error = no
   }
  # Loaded module rlm_always
  # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients
  # Loaded module rlm_detail
  # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
  detail auth_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
  detail reply_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
  # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
  detail {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
  # Loaded module rlm_radutmp
  # Instantiating module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/var/log/freeradius/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration
  # Loaded module rlm_preprocess
  # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
  	hints = "/etc/freeradius/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
  # Loaded module rlm_logintime
  # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loaded module rlm_soh
  # Instantiating module "soh" from file /etc/freeradius/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /etc/freeradius/mods-enabled/dhcp
  # Instantiating module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
  radutmp {
  	filename = "/var/log/freeradius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_digest
  # Instantiating module "digest" from file /etc/freeradius/mods-enabled/digest
  # Loaded module rlm_exec
  # Instantiating module "exec" from file /etc/freeradius/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Instantiating module "echo" from file /etc/freeradius/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Loaded module rlm_replicate
  # Instantiating module "replicate" from file /etc/freeradius/mods-enabled/replicate
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
  cache cache_eap {
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 16384
  	epoch = 0
  	add_stats = no
  }
  # Loaded module rlm_linelog
  # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog
  linelog {
  	filename = "/var/log/freeradius/linelog"
  	permissions = 384
  	format = "This is a log message for %{User-Name}"
  	reference = "%{%{Packet-Type}:-format}"
  }
  # Loaded module rlm_utf8
  # Instantiating module "utf8" from file /etc/freeradius/mods-enabled/utf8
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  	filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  	filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  	filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
  	key = "%{User-Name}"
  	relaxed = no
  }
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  	filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
  	key = "%{User-Name}"
  	relaxed = no
  }
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  	filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"
  	key = "%{User-Name}"
  	relaxed = no
  }
reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /etc/freeradius/mods-enabled/chap
  # Loaded module rlm_realm
  # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = no
  }
  # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = no
  }
  # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = no
  }
  # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\"
  	ignore_default = no
  	ignore_null = no
  }
  # Loaded module rlm_passwd
  # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
  passwd etc_passwd {
  	filename = "/etc/passwd"
  	format = "*User-Name:Crypt-Password:"
  	delimiter = ":"
  	ignore_nislike = no
  	ignore_empty = yes
  	allow_multiple_keys = no
  	hash_size = 100
  }
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
  exec ntlm_auth {
  	wait = yes
  	program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  	shell_escape = yes
  }
  # Loaded module rlm_sql
  # Instantiating module "sql" from file /etc/freeradius/mods-enabled/sql
  sql {
  	driver = "rlm_sql_mysql"
  	server = "localhost"
  	port = "3306"
  	login = "radius"
  	password = "fheman"
  	radius_db = "radius"
  	read_groups = yes
  	read_clients = yes
  	delete_stale_sessions = yes
  	sql_user_name = "%{User-Name}"
  	default_user_profile = ""
  	client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
  	authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
  	authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
  	authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id"
  	authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id"
  	group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
  	simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
  	simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
   accounting {
   	reference = "%{tolower:type.%{Acct-Status-Type}.query}"
   }
   post-auth {
   	reference = ".query"
   }
   mysql {
    tls {
    }
   }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
   pool {
   	start = 5
   	min = 4
   	max = 10
   	spare = 3
   	uses = 0
   	lifetime = 0
   	cleanup_delay = 5
   	idle_timeout = 60
   	spread = no
   }
rlm_sql (sql): Opening additional connection (0)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (1)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (2)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (3)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (4)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (4)
rlm_sql (sql): Executing query: 'SELECT id, nasname, shortname, type, secret, server FROM nas'
rlm_sql (sql): Adding client 192.1 (adfa) to global clients list
rlm_sql (192.0.0.1): Client "adfa" (sql) added
rlm_sql (sql): Released connection (4)
  # Loaded module rlm_pap
  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
  pap {
  	auto_header = no
  	normalise = yes
  }
  # Loaded module rlm_perl
  # Instantiating module "perl" from file /etc/freeradius/mods-enabled/perl
  perl {
  	filename = "/etc/freeradius/mods-config/perl/example.pl"
  	func_authorize = "authorize"
  	func_authenticate = "authenticate"
  	func_post_auth = "post_auth"
  	func_accounting = "accounting"
  	func_preacct = "preacct"
  	func_checksimul = "checksimul"
  	func_detach = "detach"
  	func_xlat = "xlat"
  	func_pre_proxy = "pre_proxy"
  	func_post_proxy = "post_proxy"
  	func_recv_coa = "recv_coa"
  	func_send_coa = "send_coa"
  }
  # Loaded module rlm_files
  # Instantiating module "files" from file /etc/freeradius/mods-enabled/files
  files {
  	filename = "/etc/freeradius/mods-config/files/authorize"
  	usersfile = "/etc/freeradius/mods-config/files/authorize"
  	acctusersfile = "/etc/freeradius/mods-config/files/accounting"
  	preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
  	compat = "no"
  }
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /etc/freeradius/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
  # Loaded module rlm_unix
  # Instantiating module "unix" from file /etc/freeradius/mods-enabled/unix
  unix {
  	radwtmp = "/var/log/freeradius/radwtmp"
  }
  # Loaded module rlm_mschap
  # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
   passchange {
   }
  	allow_retry = yes
  }
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
WARNING: Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
server default { # from file /etc/freeradius/sites-enabled/default
 # Creating Auth-Type = digest
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading virtual module acct_unique
 # Loading accounting {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Loading virtual module remove_reply_message_if_eap
 # Loading virtual module remove_reply_message_if_eap
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
  	type = "auth"
  	ipaddr = 127.0.0.1
  	port = 18120
}
listen {
  	type = "auth"
  	ipaddr = *
  	port = 135
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipaddr = *
  	port = 139
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Listening on auth address * port 135 as server default
Listening on acct address * port 139 as server default
Ready to process requests.
rad_recv: Access-Request packet from host 27.33.228.125 port 45506, id=154, length=208
	Service-Type = Framed-User
	Framed-MTU = 1400
	User-Name = 'bob'
	NAS-Port-Id = 'wlan4'
	NAS-Port-Type = Wireless-802.11
	Acct-Session-Id = '822000c6'
	Acct-Multi-Session-Id = '02-0C-42-B7-A9-5E-D0-22-BE-BA-2A-1E-82-20-00-00-00-00-00-5A'
	Calling-Station-Id = 'D0-22-BE-BA-2A-1E'
	Called-Station-Id = '02-0C-42-B7-A9-5E:HOME'
	EAP-Message = 0x0200000801626f62
	Message-Authenticator = 0xd455ac9e2f1e95ade23f374f764164c5
	NAS-Identifier = 'MikroTik'
	NAS-IP-Address = 27.33.228.125
(0) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(0)   authorize {
(0)   ? if (User-Name)
(0)   ? if (User-Name) -> TRUE
(0)   if (User-Name) {
(0) 	expand: "%{User-Name}" -> 'bob'
(0) SQL-User-Name set to 'bob'
rlm_sql (sql): Reserved connection (4)
rlm_sql (sql): Executing query: 'UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='bob' and CallingStationId='D0-22-BE-BA-2A-1E' and AcctStopTime is null'
(0) SQL query affected no rows
rlm_sql (sql): Released connection (4)
rlm_sql (sql): Closing connection (0): Too many free connections (5 > 3)
rlm_sql_mysql: Socket destructor called, closing socket
(0) 	expand: "%{sql:UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='%{User-Name}' and CallingStationId='%{Calling-Station-Id}' and AcctStopTime is null}" -> ''
(0)   } # if (User-Name) = notfound
(0)   [preprocess] = ok
(0)   [chap] = noop
(0)   [mschap] = noop
(0) eap : EAP packet type response id 0 length 8
(0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)   [eap] = ok
(0)  } #  authorize = ok
(0) Found Auth-Type = EAP
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   authenticate {
(0) eap : Peer sent Identity (1)
(0) eap : Calling eap_md5 to process EAP data
rlm_eap_md5: Issuing Challenge
(0) eap : New EAP session, adding 'State' attribute to reply 0xb77514c3b7741058
(0)   [eap] = handled
(0)  } #  authenticate = handled
Sending Access-Challenge of id 154 from 10.1.1.2 port 135 to 27.33.228.125 port 45506
	EAP-Message = 0x01010016041085d0a76933e09c9838428d7c2edf4101
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xb77514c3b7741058e310744eea16afdc
(0) Finished request 0.
Waking up in 0.3 seconds.
rad_recv: Access-Request packet from host 27.33.228.125 port 45095, id=155, length=224
	Service-Type = Framed-User
	Framed-MTU = 1400
	User-Name = 'bob'
	State = 0xb77514c3b7741058e310744eea16afdc
	NAS-Port-Id = 'wlan4'
	NAS-Port-Type = Wireless-802.11
	Acct-Session-Id = '822000c6'
	Acct-Multi-Session-Id = '02-0C-42-B7-A9-5E-D0-22-BE-BA-2A-1E-82-20-00-00-00-00-00-5A'
	Calling-Station-Id = 'D0-22-BE-BA-2A-1E'
	Called-Station-Id = '02-0C-42-B7-A9-5E:HOME'
	EAP-Message = 0x020100060319
	Message-Authenticator = 0x65c317e6158db4a2b1c3f30538629264
	NAS-Identifier = 'MikroTik'
	NAS-IP-Address = 27.33.228.125
(1) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(1)   authorize {
(1)   ? if (User-Name)
(1)   ? if (User-Name) -> TRUE
(1)   if (User-Name) {
(1) 	expand: "%{User-Name}" -> 'bob'
(1) SQL-User-Name set to 'bob'
rlm_sql (sql): Reserved connection (4)
rlm_sql (sql): Executing query: 'UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='bob' and CallingStationId='D0-22-BE-BA-2A-1E' and AcctStopTime is null'
(1) SQL query affected no rows
rlm_sql (sql): Released connection (4)
(1) 	expand: "%{sql:UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='%{User-Name}' and CallingStationId='%{Calling-Station-Id}' and AcctStopTime is null}" -> ''
(1)   } # if (User-Name) = notfound
(1)   [preprocess] = ok
(1)   [chap] = noop
(1)   [mschap] = noop
(1) eap : EAP packet type response id 1 length 6
(1) eap : No EAP Start, assuming it's an on-going EAP conversation
(1)   [eap] = updated
(1)   [files] = noop
(1) sql : 	expand: "%{User-Name}" -> 'bob'
(1) sql : SQL-User-Name set to 'bob'
rlm_sql (sql): Reserved connection (4)
(1) sql : 	expand: "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" -> 'SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bob' ORDER BY id'
rlm_sql (sql): Executing query: 'SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bob' ORDER BY id'
(1) sql : User found in radcheck table
(1) sql : Check items matched
(1) sql : 	expand: "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" -> 'SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bob' ORDER BY id'
rlm_sql (sql): Executing query: 'SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bob' ORDER BY id'
(1) sql : User found in radreply table
(1) sql : 	expand: "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" -> 'SELECT groupname FROM radusergroup WHERE username = 'bob' ORDER BY priority'
rlm_sql (sql): Executing query: 'SELECT groupname FROM radusergroup WHERE username = 'bob' ORDER BY priority'
rlm_sql (sql): Released connection (4)
(1)   [-sql] = ok
(1)   [expiration] = noop
(1)   [logintime] = noop
(1) WARNING: pap : Auth-Type already set.  Not setting to PAP
(1)   [pap] = noop
(1) dailycounter : Entering module authorize code
sqlcounter_expand:  'SELECT IFNULL(TIME_TO_SEC(TIMEDIFF(NOW(), MIN(AcctStartTime))),0) FROM `radacct` WHERE UserName='%{User-Name}' ORDER BY AcctStartTime LIMIT 1;'
(1) dailycounter : 	expand: "%{User-Name}" -> 'bob'
(1) dailycounter : SQL-User-Name set to 'bob'
rlm_sql (sql): Reserved connection (4)
rlm_sql (sql): Executing query: 'SELECT IFNULL(TIME_TO_SEC(TIMEDIFF(NOW(), MIN(AcctStartTime))),0) FROM `radacct` WHERE UserName='bob' ORDER BY AcctStartTime LIMIT 1;'
(1) dailycounter : sql_xlat finished
rlm_sql (sql): Released connection (4)
(1) dailycounter : 	expand: "%{sql:SELECT IFNULL(TIME_TO_SEC(TIMEDIFF(NOW(), MIN(AcctStartTime))),0) FROM `radacct` WHERE UserName='%{User-Name}' ORDER BY AcctStartTime LIMIT 1;}SELECT IFNULL(TIME_TO_SEC(TIMEDIFF(NOW(), MIN(AcctStartTime))),0) FROM `radacct` WHERE UserName='%{User-Name}' ORDER BY AcctStartTime LIMIT 1;}" -> '0SELECT IFNULL(TIME_TO_SEC(TIMEDIFF(NOW(), MIN(AcctStartTime))),0) FROM `radacct` WHERE UserName='bob' ORDER BY AcctStartTime LIMIT 1;}'
(1) dailycounter : Check item is greater than query result
(1) dailycounter : Authorized user bob, check_item=300, counter=0
(1) dailycounter : Sent Reply-Item for user bob, Type=Session-Timeout, value=300
(1)   [dailycounter] = ok
(1)  } #  authorize = updated
(1) Found Auth-Type = EAP
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   authenticate {
(1) eap : Expiring EAP session with state 0xb77514c3b7741058
(1) eap : Finished EAP session with state 0xb77514c3b7741058
(1) eap : Previous EAP request found for state 0xb77514c3b7741058, released from the list
(1) eap : Peer sent NAK (3)
(1) eap : Found mutually acceptable type PEAP (25)
(1) eap : Calling eap_peap to process EAP data
(1) eap_peap : Flushing SSL sessions (of #0)
(1) eap_peap : Initiate
(1) eap_peap : Start returned 1
(1) eap : New EAP session, adding 'State' attribute to reply 0xb77514c3b6770d58
(1)   [eap] = handled
(1)  } #  authenticate = handled
Sending Access-Challenge of id 155 from 10.1.1.2 port 135 to 27.33.228.125 port 45095
	Session-Timeout := 300
	Idle-Timeout := 30
	EAP-Message = 0x010200061920
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xb77514c3b6770d58e310744eea16afdc
(1) Finished request 1.
Waking up in 0.2 seconds.
rad_recv: Access-Request packet from host 27.33.228.125 port 33175, id=156, length=426
	Service-Type = Framed-User
	Framed-MTU = 1400
	User-Name = 'bob'
	State = 0xb77514c3b6770d58e310744eea16afdc
	NAS-Port-Id = 'wlan4'
	NAS-Port-Type = Wireless-802.11
	Acct-Session-Id = '822000c6'
	Acct-Multi-Session-Id = '02-0C-42-B7-A9-5E-D0-22-BE-BA-2A-1E-82-20-00-00-00-00-00-5A'
	Calling-Station-Id = 'D0-22-BE-BA-2A-1E'
	Called-Station-Id = '02-0C-42-B7-A9-5E:HOME'
	EAP-Message = 0x020200d01980000000c616030100c1010000bd03015372aa760d2dba4e060f730a8d3aebe1ea18e476293b5d8092fbafbdbe70522d000054c014c00ac022c02100390038c00fc0050035c012c008c01cc01b00160013c00dc003000ac013c009c01fc01e00330032c00ec004002fc011c007c00cc002000500040015001200090014001100080006000300ff01000040000b000403000102000a00340032000e000d0019000b000c00180009000a00160017000800060007001400150004000500120013000100020003000f00100011
	Message-Authenticator = 0x54593c37152b86ba9e7213938cd6edcb
	NAS-Identifier = 'MikroTik'
	NAS-IP-Address = 27.33.228.125
(2) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(2)   authorize {
(2)   ? if (User-Name)
(2)   ? if (User-Name) -> TRUE
(2)   if (User-Name) {
(2) 	expand: "%{User-Name}" -> 'bob'
(2) SQL-User-Name set to 'bob'
rlm_sql (sql): Reserved connection (4)
rlm_sql (sql): Executing query: 'UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='bob' and CallingStationId='D0-22-BE-BA-2A-1E' and AcctStopTime is null'
(2) SQL query affected no rows
rlm_sql (sql): Released connection (4)
(2) 	expand: "%{sql:UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='%{User-Name}' and CallingStationId='%{Calling-Station-Id}' and AcctStopTime is null}" -> ''
(2)   } # if (User-Name) = notfound
(2)   [preprocess] = ok
(2)   [chap] = noop
(2)   [mschap] = noop
(2) eap : EAP packet type response id 2 length 208
(2) eap : Continuing tunnel setup.
(2)   [eap] = ok
(2)  } #  authorize = ok
(2) Found Auth-Type = EAP
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   authenticate {
(2) eap : Expiring EAP session with state 0xb77514c3b6770d58
(2) eap : Finished EAP session with state 0xb77514c3b6770d58
(2) eap : Previous EAP request found for state 0xb77514c3b6770d58, released from the list
(2) eap : Peer sent PEAP (25)
(2) eap : EAP PEAP (25)
(2) eap : Calling eap_peap to process EAP data
(2) eap_peap : processing EAP-TLS
  TLS Length 198
(2) eap_peap : Length Included
(2) eap_peap : eaptls_verify returned 11 
(2) eap_peap :     (other): before/accept initialization
(2) eap_peap :     TLS_accept: before/accept initialization
(2) eap_peap : <<< TLS 1.0 Handshake [length 00c1], ClientHello  
(2) eap_peap :     TLS_accept: SSLv3 read client hello A
(2) eap_peap : >>> TLS 1.0 Handshake [length 0059], ServerHello  
(2) eap_peap :     TLS_accept: SSLv3 write server hello A
(2) eap_peap : >>> TLS 1.0 Handshake [length 08d0], Certificate  
(2) eap_peap :     TLS_accept: SSLv3 write certificate A
(2) eap_peap : >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange  
(2) eap_peap :     TLS_accept: SSLv3 write key exchange A
(2) eap_peap : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone  
(2) eap_peap :     TLS_accept: SSLv3 write server done A
(2) eap_peap :     TLS_accept: SSLv3 flush data
(2) eap_peap :     TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase 
In SSL Accept mode  
(2) eap_peap : eaptls_process returned 13 
(2) eap_peap : FR_TLS_HANDLED
(2) eap : New EAP session, adding 'State' attribute to reply 0xb77514c3b5760d58
(2)   [eap] = handled
(2)  } #  authenticate = handled
Sending Access-Challenge of id 156 from 10.1.1.2 port 135 to 27.33.228.125 port 33175
	EAP-Message = 
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xb77514c3b5760d58e310744eea16afdc
(2) Finished request 2.
Waking up in 0.1 seconds.
rad_recv: Access-Request packet from host 27.33.228.125 port 59769, id=157, length=224
	Service-Type = Framed-User
	Framed-MTU = 1400
	User-Name = 'bob'
	State = 0xb77514c3b5760d58e310744eea16afdc
	NAS-Port-Id = 'wlan4'
	NAS-Port-Type = Wireless-802.11
	Acct-Session-Id = '822000c6'
	Acct-Multi-Session-Id = '02-0C-42-B7-A9-5E-D0-22-BE-BA-2A-1E-82-20-00-00-00-00-00-5A'
	Calling-Station-Id = 'D0-22-BE-BA-2A-1E'
	Called-Station-Id = '02-0C-42-B7-A9-5E:HOME'
	EAP-Message = 0x020300061900
	Message-Authenticator = 0xfa63123883b0c2ee41c0513658b01cba
	NAS-Identifier = 'MikroTik'
	NAS-IP-Address = 27.33.228.125
(3) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(3)   authorize {
(3)   ? if (User-Name)
(3)   ? if (User-Name) -> TRUE
(3)   if (User-Name) {
(3) 	expand: "%{User-Name}" -> 'bob'
(3) SQL-User-Name set to 'bob'
rlm_sql (sql): Reserved connection (4)
rlm_sql (sql): Executing query: 'UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='bob' and CallingStationId='D0-22-BE-BA-2A-1E' and AcctStopTime is null'
(3) SQL query affected no rows
rlm_sql (sql): Released connection (4)
rlm_sql (sql): Closing connection (1): Too many free connections (4 > 3)
rlm_sql_mysql: Socket destructor called, closing socket
(3) 	expand: "%{sql:UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='%{User-Name}' and CallingStationId='%{Calling-Station-Id}' and AcctStopTime is null}" -> ''
(3)   } # if (User-Name) = notfound
(3)   [preprocess] = ok
(3)   [chap] = noop
(3)   [mschap] = noop
(3) eap : EAP packet type response id 3 length 6
(3) eap : Continuing tunnel setup.
(3)   [eap] = ok
(3)  } #  authorize = ok
(3) Found Auth-Type = EAP
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   authenticate {
(3) eap : Expiring EAP session with state 0xb77514c3b5760d58
(3) eap : Finished EAP session with state 0xb77514c3b5760d58
(3) eap : Previous EAP request found for state 0xb77514c3b5760d58, released from the list
(3) eap : Peer sent PEAP (25)
(3) eap : EAP PEAP (25)
(3) eap : Calling eap_peap to process EAP data
(3) eap_peap : processing EAP-TLS
(3) eap_peap : Received TLS ACK
(3) eap_peap : Received TLS ACK
(3) eap_peap : ACK handshake fragment handler
(3) eap_peap : eaptls_verify returned 1 
(3) eap_peap : eaptls_process returned 13 
(3) eap_peap : FR_TLS_HANDLED
(3) eap : New EAP session, adding 'State' attribute to reply 0xb77514c3b4710d58
(3)   [eap] = handled
(3)  } #  authenticate = handled
Sending Access-Challenge of id 157 from 10.1.1.2 port 135 to 27.33.228.125 port 59769
	EAP-Message = 
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xb77514c3b4710d58e310744eea16afdc
(3) Finished request 3.
rad_recv: Access-Request packet from host 27.33.228.125 port 44142, id=158, length=224
	Service-Type = Framed-User
	Framed-MTU = 1400
	User-Name = 'bob'
	State = 0xb77514c3b4710d58e310744eea16afdc
	NAS-Port-Id = 'wlan4'
	NAS-Port-Type = Wireless-802.11
	Acct-Session-Id = '822000c6'
	Acct-Multi-Session-Id = '02-0C-42-B7-A9-5E-D0-22-BE-BA-2A-1E-82-20-00-00-00-00-00-5A'
	Calling-Station-Id = 'D0-22-BE-BA-2A-1E'
	Called-Station-Id = '02-0C-42-B7-A9-5E:HOME'
	EAP-Message = 0x020400061900
	Message-Authenticator = 0xbc30a334b99bbc1a57f70bf46bf55e0c
	NAS-Identifier = 'MikroTik'
	NAS-IP-Address = 27.33.228.125
(4) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(4)   authorize {
(4)   ? if (User-Name)
(4)   ? if (User-Name) -> TRUE
(4)   if (User-Name) {
(4) 	expand: "%{User-Name}" -> 'bob'
(4) SQL-User-Name set to 'bob'
rlm_sql (sql): Reserved connection (4)
rlm_sql (sql): Executing query: 'UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='bob' and CallingStationId='D0-22-BE-BA-2A-1E' and AcctStopTime is null'
(4) SQL query affected no rows
rlm_sql (sql): Released connection (4)
(4) 	expand: "%{sql:UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='%{User-Name}' and CallingStationId='%{Calling-Station-Id}' and AcctStopTime is null}" -> ''
(4)   } # if (User-Name) = notfound
(4)   [preprocess] = ok
(4)   [chap] = noop
(4)   [mschap] = noop
(4) eap : EAP packet type response id 4 length 6
(4) eap : Continuing tunnel setup.
(4)   [eap] = ok
(4)  } #  authorize = ok
(4) Found Auth-Type = EAP
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4)   authenticate {
(4) eap : Expiring EAP session with state 0xb77514c3b4710d58
(4) eap : Finished EAP session with state 0xb77514c3b4710d58
(4) eap : Previous EAP request found for state 0xb77514c3b4710d58, released from the list
(4) eap : Peer sent PEAP (25)
(4) eap : EAP PEAP (25)
(4) eap : Calling eap_peap to process EAP data
(4) eap_peap : processing EAP-TLS
(4) eap_peap : Received TLS ACK
(4) eap_peap : Received TLS ACK
(4) eap_peap : ACK handshake fragment handler
(4) eap_peap : eaptls_verify returned 1 
(4) eap_peap : eaptls_process returned 13 
(4) eap_peap : FR_TLS_HANDLED
(4) eap : New EAP session, adding 'State' attribute to reply 0xb77514c3b3700d58
(4)   [eap] = handled
(4)  } #  authenticate = handled
Sending Access-Challenge of id 158 from 10.1.1.2 port 135 to 27.33.228.125 port 44142
	EAP-Message = 
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xb77514c3b3700d58e310744eea16afdc
(4) Finished request 4.
Waking up in 0.1 seconds.
rad_recv: Access-Request packet from host 27.33.228.125 port 51943, id=159, length=362
	Service-Type = Framed-User
	Framed-MTU = 1400
	User-Name = 'bob'
	State = 0xb77514c3b3700d58e310744eea16afdc
	NAS-Port-Id = 'wlan4'
	NAS-Port-Type = Wireless-802.11
	Acct-Session-Id = '822000c6'
	Acct-Multi-Session-Id = '02-0C-42-B7-A9-5E-D0-22-BE-BA-2A-1E-82-20-00-00-00-00-00-5A'
	Calling-Station-Id = 'D0-22-BE-BA-2A-1E'
	Called-Station-Id = '02-0C-42-B7-A9-5E:HOME'
	EAP-Message = 0x020500901980000000861603010046100000424104f494da7defcb591e88610c6f8c93ad9a782239423b718ccfdcbf4fde4685bdc6f1a553d810af11fd351669eb3eb2edb51cd073967f5d385413097e009f175cc31403010001011603010030a6a4c1e31cbe91b1f5a02c23143ed21a854cdc0e5b43074f44980307c069a00ce72a5e7d648e883747273e32f3d2e444
	Message-Authenticator = 0xe3e9d81fff1e9bc99eda56bef4032c16
	NAS-Identifier = 'MikroTik'
	NAS-IP-Address = 27.33.228.125
(5) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(5)   authorize {
(5)   ? if (User-Name)
(5)   ? if (User-Name) -> TRUE
(5)   if (User-Name) {
(5) 	expand: "%{User-Name}" -> 'bob'
(5) SQL-User-Name set to 'bob'
rlm_sql (sql): Reserved connection (4)
rlm_sql (sql): Executing query: 'UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='bob' and CallingStationId='D0-22-BE-BA-2A-1E' and AcctStopTime is null'
(5) SQL query affected no rows
rlm_sql (sql): Released connection (4)
(5) 	expand: "%{sql:UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='%{User-Name}' and CallingStationId='%{Calling-Station-Id}' and AcctStopTime is null}" -> ''
(5)   } # if (User-Name) = notfound
(5)   [preprocess] = ok
(5)   [chap] = noop
(5)   [mschap] = noop
(5) eap : EAP packet type response id 5 length 144
(5) eap : Continuing tunnel setup.
(5)   [eap] = ok
(5)  } #  authorize = ok
(5) Found Auth-Type = EAP
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   authenticate {
(5) eap : Expiring EAP session with state 0xb77514c3b3700d58
(5) eap : Finished EAP session with state 0xb77514c3b3700d58
(5) eap : Previous EAP request found for state 0xb77514c3b3700d58, released from the list
(5) eap : Peer sent PEAP (25)
(5) eap : EAP PEAP (25)
(5) eap : Calling eap_peap to process EAP data
(5) eap_peap : processing EAP-TLS
  TLS Length 134
(5) eap_peap : Length Included
(5) eap_peap : eaptls_verify returned 11 
(5) eap_peap : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange  
(5) eap_peap :     TLS_accept: SSLv3 read client key exchange A
(5) eap_peap : <<< TLS 1.0 ChangeCipherSpec [length 0001]  
(5) eap_peap : <<< TLS 1.0 Handshake [length 0010], Finished  
(5) eap_peap :     TLS_accept: SSLv3 read finished A
(5) eap_peap : >>> TLS 1.0 ChangeCipherSpec [length 0001]  
(5) eap_peap :     TLS_accept: SSLv3 write change cipher spec A
(5) eap_peap : >>> TLS 1.0 Handshake [length 0010], Finished  
(5) eap_peap :     TLS_accept: SSLv3 write finished A
(5) eap_peap :     TLS_accept: SSLv3 flush data
  SSL: adding session 561a016aaabb3ab586d3d72814f3b51f6152343a46d683717202bd426d37b952 to cache
(5) eap_peap :     (other): SSL negotiation finished successfully
SSL Connection Established 
(5) eap_peap : eaptls_process returned 13 
(5) eap_peap : FR_TLS_HANDLED
(5) eap : New EAP session, adding 'State' attribute to reply 0xb77514c3b2730d58
(5)   [eap] = handled
(5)  } #  authenticate = handled
Sending Access-Challenge of id 159 from 10.1.1.2 port 135 to 27.33.228.125 port 51943
	EAP-Message = 0x010600411900140301000101160301003040f64e60e2eb542bd29c46ee6e9439c2abcba447ad65b1348a748d03bd00db69ca74130a86d61efdcc4cea83f6b51173
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xb77514c3b2730d58e310744eea16afdc
(5) Finished request 5.
Waking up in 0.1 seconds.
rad_recv: Access-Request packet from host 27.33.228.125 port 51634, id=160, length=224
	Service-Type = Framed-User
	Framed-MTU = 1400
	User-Name = 'bob'
	State = 0xb77514c3b2730d58e310744eea16afdc
	NAS-Port-Id = 'wlan4'
	NAS-Port-Type = Wireless-802.11
	Acct-Session-Id = '822000c6'
	Acct-Multi-Session-Id = '02-0C-42-B7-A9-5E-D0-22-BE-BA-2A-1E-82-20-00-00-00-00-00-5A'
	Calling-Station-Id = 'D0-22-BE-BA-2A-1E'
	Called-Station-Id = '02-0C-42-B7-A9-5E:HOME'
	EAP-Message = 0x020600061900
	Message-Authenticator = 0x62033b6e5e3c1c581d7e614c8a8d8aa6
	NAS-Identifier = 'MikroTik'
	NAS-IP-Address = 27.33.228.125
(6) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(6)   authorize {
(6)   ? if (User-Name)
(6)   ? if (User-Name) -> TRUE
(6)   if (User-Name) {
(6) 	expand: "%{User-Name}" -> 'bob'
(6) SQL-User-Name set to 'bob'
rlm_sql (sql): Reserved connection (4)
rlm_sql (sql): Executing query: 'UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='bob' and CallingStationId='D0-22-BE-BA-2A-1E' and AcctStopTime is null'
(6) SQL query affected no rows
rlm_sql (sql): Released connection (4)
(6) 	expand: "%{sql:UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='%{User-Name}' and CallingStationId='%{Calling-Station-Id}' and AcctStopTime is null}" -> ''
(6)   } # if (User-Name) = notfound
(6)   [preprocess] = ok
(6)   [chap] = noop
(6)   [mschap] = noop
(6) eap : EAP packet type response id 6 length 6
(6) eap : Continuing tunnel setup.
(6)   [eap] = ok
(6)  } #  authorize = ok
(6) Found Auth-Type = EAP
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6)   authenticate {
(6) eap : Expiring EAP session with state 0xb77514c3b2730d58
(6) eap : Finished EAP session with state 0xb77514c3b2730d58
(6) eap : Previous EAP request found for state 0xb77514c3b2730d58, released from the list
(6) eap : Peer sent PEAP (25)
(6) eap : EAP PEAP (25)
(6) eap : Calling eap_peap to process EAP data
(6) eap_peap : processing EAP-TLS
(6) eap_peap : Received TLS ACK
(6) eap_peap : Received TLS ACK
(6) eap_peap : ACK handshake is finished
(6) eap_peap : eaptls_verify returned 3 
(6) eap_peap : eaptls_process returned 3 
(6) eap_peap : FR_TLS_SUCCESS
(6) eap_peap : Session established.  Decoding tunneled attributes.
(6) eap_peap : Peap state TUNNEL ESTABLISHED
(6) eap : New EAP session, adding 'State' attribute to reply 0xb77514c3b1720d58
(6)   [eap] = handled
(6)  } #  authenticate = handled
Sending Access-Challenge of id 160 from 10.1.1.2 port 135 to 27.33.228.125 port 51634
	EAP-Message = 0x0107002b19001703010020b116e00d792e2364be0df3feff9a17d334dbbec47748dc724eeaadd78e2488c3
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xb77514c3b1720d58e310744eea16afdc
(6) Finished request 6.
Waking up in 0.1 seconds.
rad_recv: Access-Request packet from host 27.33.228.125 port 60415, id=161, length=298
	Service-Type = Framed-User
	Framed-MTU = 1400
	User-Name = 'bob'
	State = 0xb77514c3b1720d58e310744eea16afdc
	NAS-Port-Id = 'wlan4'
	NAS-Port-Type = Wireless-802.11
	Acct-Session-Id = '822000c6'
	Acct-Multi-Session-Id = '02-0C-42-B7-A9-5E-D0-22-BE-BA-2A-1E-82-20-00-00-00-00-00-5A'
	Calling-Station-Id = 'D0-22-BE-BA-2A-1E'
	Called-Station-Id = '02-0C-42-B7-A9-5E:HOME'
	EAP-Message = 0x02070050190017030100200229a2400fe0de57de773f5997d9dcbc5bccaf7274a347fe4f8b2f7f7125d19717030100200d9762d3d1c9a8a85e7f74131bee66bc6ae94f644d71f13130da0d8c2e27eb5b
	Message-Authenticator = 0x75115a4e80e1ecd6df5df7dddec1c6c1
	NAS-Identifier = 'MikroTik'
	NAS-IP-Address = 27.33.228.125
(7) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(7)   authorize {
(7)   ? if (User-Name)
(7)   ? if (User-Name) -> TRUE
(7)   if (User-Name) {
(7) 	expand: "%{User-Name}" -> 'bob'
(7) SQL-User-Name set to 'bob'
rlm_sql (sql): Reserved connection (4)
rlm_sql (sql): Executing query: 'UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='bob' and CallingStationId='D0-22-BE-BA-2A-1E' and AcctStopTime is null'
(7) SQL query affected no rows
rlm_sql (sql): Released connection (4)
(7) 	expand: "%{sql:UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='%{User-Name}' and CallingStationId='%{Calling-Station-Id}' and AcctStopTime is null}" -> ''
(7)   } # if (User-Name) = notfound
(7)   [preprocess] = ok
(7)   [chap] = noop
(7)   [mschap] = noop
(7) eap : EAP packet type response id 7 length 80
(7) eap : Continuing tunnel setup.
(7)   [eap] = ok
(7)  } #  authorize = ok
(7) Found Auth-Type = EAP
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7)   authenticate {
(7) eap : Expiring EAP session with state 0xb77514c3b1720d58
(7) eap : Finished EAP session with state 0xb77514c3b1720d58
(7) eap : Previous EAP request found for state 0xb77514c3b1720d58, released from the list
(7) eap : Peer sent PEAP (25)
(7) eap : EAP PEAP (25)
(7) eap : Calling eap_peap to process EAP data
(7) eap_peap : processing EAP-TLS
(7) eap_peap : eaptls_verify returned 7 
(7) eap_peap : Done initial handshake
(7) eap_peap : eaptls_process returned 7 
(7) eap_peap : FR_TLS_OK
(7) eap_peap : Session established.  Decoding tunneled attributes.
(7) eap_peap : Peap state WAITING FOR INNER IDENTITY
(7) eap_peap : Identity - bob
(7) eap_peap : Got inner identity 'bob'
(7) eap_peap : Setting default EAP type for tunneled EAP session.
(7) eap_peap : Got tunneled request
	EAP-Message = 0x0207000801626f62
server default {
(7) eap_peap : Setting User-Name to bob
Sending tunneled request
	EAP-Message = 0x0207000801626f62
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = 'bob'
server inner-tunnel {
(7) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel
(7)   authorize {
(7)   [chap] = noop
(7)   [mschap] = noop
(7) suffix : No '@' in User-Name = "bob", looking up realm NULL
(7) suffix : No such realm "NULL"
(7)   [suffix] = noop
(7)   update control {
(7) 		Proxy-To-Realm := 'LOCAL'
(7)   } # update control = noop
(7) eap : EAP packet type response id 7 length 8
(7) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(7)   [eap] = ok
(7)  } #  authorize = ok
(7) Found Auth-Type = EAP
(7) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(7)   authenticate {
(7) eap : Peer sent Identity (1)
(7) eap : Calling eap_mschapv2 to process EAP data
(7) eap_mschapv2 : Issuing Challenge
(7) eap : New EAP session, adding 'State' attribute to reply 0x7b061f337b0e0549
(7)   [eap] = handled
(7)  } #  authenticate = handled
} # server inner-tunnel
(7) eap_peap : Got tunneled reply code 11
	EAP-Message = 0x0108001d1a0108001810120927d222ee866a732f007a2873bda5626f62
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7b061f337b0e0549d125cd93a8b94882
(7) eap_peap : Got tunneled reply RADIUS code 11
	EAP-Message = 0x0108001d1a0108001810120927d222ee866a732f007a2873bda5626f62
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7b061f337b0e0549d125cd93a8b94882
(7) eap_peap : Got tunneled Access-Challenge
(7) eap : New EAP session, adding 'State' attribute to reply 0xb77514c3b07d0d58
(7)   [eap] = handled
(7)  } #  authenticate = handled
Sending Access-Challenge of id 161 from 10.1.1.2 port 135 to 27.33.228.125 port 60415
	EAP-Message = 0x0108005b190017030100503be47546056816c2a8b7a4326c5539b2fe0479180434521f552eb150e75c8107f494dc671f1bfa8278a0080e7da99a877678ff0fc56bf2b195bc1afa7e389ab4f360dd17a210a367a373ef5e46f1eb8a
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xb77514c3b07d0d58e310744eea16afdc
(7) Finished request 7.
Waking up in 0.1 seconds.
rad_recv: Access-Request packet from host 27.33.228.125 port 36521, id=162, length=346
	Service-Type = Framed-User
	Framed-MTU = 1400
	User-Name = 'bob'
	State = 0xb77514c3b07d0d58e310744eea16afdc
	NAS-Port-Id = 'wlan4'
	NAS-Port-Type = Wireless-802.11
	Acct-Session-Id = '822000c6'
	Acct-Multi-Session-Id = '02-0C-42-B7-A9-5E-D0-22-BE-BA-2A-1E-82-20-00-00-00-00-00-5A'
	Calling-Station-Id = 'D0-22-BE-BA-2A-1E'
	Called-Station-Id = '02-0C-42-B7-A9-5E:HOME'
	EAP-Message = 0x0208008019001703010020ce07c3e4bc825bafca5b7e10900b2a32c14128e41b5c6d9639b039494b30277017030100502282368690258c6f0eafb4b02600fdf731e39dc0ff4f614ae097676cb66a714f216543ea0559f625e8b6acc37f6c9acae7a5f325f185055fa31ce58a9e8cc9bb23afb8d918b1620ad5e27a10949dcd20
	Message-Authenticator = 0x75a793b0c19f08f0ae93227bec4b55de
	NAS-Identifier = 'MikroTik'
	NAS-IP-Address = 27.33.228.125
(8) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(8)   authorize {
(8)   ? if (User-Name)
(8)   ? if (User-Name) -> TRUE
(8)   if (User-Name) {
(8) 	expand: "%{User-Name}" -> 'bob'
(8) SQL-User-Name set to 'bob'
rlm_sql (sql): Reserved connection (4)
rlm_sql (sql): Executing query: 'UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='bob' and CallingStationId='D0-22-BE-BA-2A-1E' and AcctStopTime is null'
(8) SQL query affected no rows
rlm_sql (sql): Released connection (4)
(8) 	expand: "%{sql:UPDATE radacct set AcctStopTime=ADDDATE(AcctStartTime,INTERVAL AcctSessionTime SECOND), AcctTerminateCause='Clear-Stale Session' WHERE UserName='%{User-Name}' and CallingStationId='%{Calling-Station-Id}' and AcctStopTime is null}" -> ''
(8)   } # if (User-Name) = notfound
(8)   [preprocess] = ok
(8)   [chap] = noop
(8)   [mschap] = noop
(8) eap : EAP packet type response id 8 length 128
(8) eap : Continuing tunnel setup.
(8)   [eap] = ok
(8)  } #  authorize = ok
(8) Found Auth-Type = EAP
(8) # Executing group from file /etc/freeradius/sites-enabled/default
(8)   authenticate {
(8) eap : Expiring EAP session with state 0x7b061f337b0e0549
(8) eap : Finished EAP session with state 0xb77514c3b07d0d58
(8) eap : Previous EAP request found for state 0xb77514c3b07d0d58, released from the list
(8) eap : Peer sent PEAP (25)
(8) eap : EAP PEAP (25)
(8) eap : Calling eap_peap to process EAP data
(8) eap_peap : processing EAP-TLS
(8) eap_peap : eaptls_verify returned 7 
(8) eap_peap : Done initial handshake
(8) eap_peap : eaptls_process returned 7 
(8) eap_peap : FR_TLS_OK
(8) eap_peap : Session established.  Decoding tunneled attributes.
(8) eap_peap : Peap state phase2
(8) eap_peap : EAP type MSCHAPv2 (26)
(8) eap_peap : Got tunneled request
	EAP-Message = 0x0208003e1a0208003931c962cbd845edd54f1d223065691b8c30000000000000000018e05dc6d019402256fe81261ab2c9210ac9e34039cf03a700626f62
server default {
(8) eap_peap : Setting User-Name to bob
Sending tunneled request
	EAP-Message = 0x0208003e1a0208003931c962cbd845edd54f1d223065691b8c30000000000000000018e05dc6d019402256fe81261ab2c9210ac9e34039cf03a700626f62
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = 'bob'
	State = 0x7b061f337b0e0549d125cd93a8b94882
server inner-tunnel {
(8) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel
(8)   authorize {
(8)   [chap] = noop
(8)   [mschap] = noop
(8) suffix : No '@' in User-Name = "bob", looking up realm NULL
(8) suffix : No such realm "NULL"
(8)   [suffix] = noop
(8)   update control {
(8) 		Proxy-To-Realm := 'LOCAL'
(8)   } # update control = noop
(8) eap : EAP packet type response id 8 length 62
(8) eap : No EAP Start, assuming it's an on-going EAP conversation
(8)   [eap] = updated
(8)   [files] = noop
(8) sql : 	expand: "%{User-Name}" -> 'bob'
(8) sql : SQL-User-Name set to 'bob'
rlm_sql (sql): Reserved connection (4)
(8) sql : 	expand: "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" -> 'SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bob' ORDER BY id'
rlm_sql (sql): Executing query: 'SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bob' ORDER BY id'
(8) sql : User found in radcheck table
(8) sql : Check items matched
(8) sql : 	expand: "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" -> 'SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bob' ORDER BY id'
rlm_sql (sql): Executing query: 'SELECT id, username, attribute, value, op FROM radreply WHERE username = 'bob' ORDER BY id'
(8) sql : User found in radreply table
(8) sql : 	expand: "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" -> 'SELECT groupname FROM radusergroup WHERE username = 'bob' ORDER BY priority'
rlm_sql (sql): Executing query: 'SELECT groupname FROM radusergroup WHERE username = 'bob' ORDER BY priority'
rlm_sql (sql): Released connection (4)
(8)   [-sql] = ok
(8)   [expiration] = noop
(8)   [logintime] = noop
(8) WARNING: pap : Auth-Type already set.  Not setting to PAP
(8)   [pap] = noop
(8)  } #  authorize = updated
(8) Found Auth-Type = EAP
(8) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(8)   authenticate {
(8) eap : Expiring EAP session with state 0x7b061f337b0e0549
(8) eap : Finished EAP session with state 0x7b061f337b0e0549
(8) eap : Previous EAP request found for state 0x7b061f337b0e0549, released from the list
(8) eap : Peer sent MSCHAPv2 (26)
(8) eap : EAP MSCHAPv2 (26)
(8) eap : Calling eap_mschapv2 to process EAP data
(8) eap_mschapv2 : # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(8) eap_mschapv2 :  Auth-Type MS-CHAP {
(8) mschap : Found Cleartext-Password, hashing to create LM-Password
(8) mschap : Found Cleartext-Password, hashing to create NT-Password
(8) mschap : Creating challenge hash with username: bob
(8) mschap : Client is using MS-CHAPv2 for bob, we need NT-Password
(8) mschap : adding MS-CHAPv2 MPPE keys
(8)   [mschap] = ok
(8)  } # Auth-Type MS-CHAP = ok
MSCHAP Success 
(8) eap : New EAP session, adding 'State' attribute to reply 0x7b061f337a0f0549
(8)   [eap] = handled
(8)  } #  authenticate = handled
} # server inner-tunnel
(8) eap_peap : Got tunneled reply code 11
	Session-Timeout := 300
	Idle-Timeout := 30
	EAP-Message = 0x010900331a0308002e533d32374134353837324635433545353846434334433734383546333732324530414444373730393738
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7b061f337a0f0549d125cd93a8b94882
(8) eap_peap : Got tunneled reply RADIUS code 11
	Session-Timeout := 300
	Idle-Timeout := 30
	EAP-Message = 0x010900331a0308002e533d32374134353837324635433545353846434334433734383546333732324530414444373730393738
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7b061f337a0f0549d125cd93a8b94882
(8) eap_peap : Got tunneled Access-Challenge
(8) eap : New EAP session, adding 'State' attribute to reply 0xb77514c3bf7c0d58
(8)   [eap] = handled
(8)  } #  authenticate = handled
Sending Access-Challenge of id 162 from 10.1.1.2 port 135 to 27.33.228.125 port 36521
	EAP-Message =