Hi Nicolas,

I browsed a little of your error and your conf files to notice you are still missing a LOT of bits of a standard freeradius configuration to connect to an AD. mschap encryptition strength, configuration of EAP tunnels and protocols, actual domain not defined in FreeRadius/proxy.conf, and then not yet VLANs (ok, not probably at this time of the game, but you eventually will get there).

You would better search and use in freeradius and Janet for tutorials about configuring RADIUS for AD. It is not as simples as tweaking the config files. 

About the certificates, I hope you dont use the current ones in production, as you just published them to the world at large.

One last note, 2.1.12 FreeRadius has serious bugs working with AD (it works, but crashes a lot). I would recommend at least 2.2.5 or going directly to version 3.x.

Regards,

Rui Ribeiro

  
Message: 2
Date: Wed, 13 Aug 2014 10:58:31 +0200
From: nfischer@hush.com
To: freeradius-users@lists.freeradius.org
Subject: freeRADIUS -> AD Auth (<100kb)
Message-ID: <20140813085831.79D2B60960@smtp.hushmail.com>
Content-Type: text/plain; charset="utf-8"

Hi there!

I have a problem with the auth against an Active Directory.
I would be very thankfull if you could help me.

Im tring to setup an WiFi Network where the Useres can auth with their
AD Useraccs,

Setup:
WiFi-Router with DD-WRT
Ubuntu 10.04LTS with FreeRADIUS kerberus samba etc.
AD at a Windows Server 2008 SBS (Total mess never install it!)

The communicatuion W-Lan Client->Router->FreeRADIUS runs.
The Ubuntu Server is in the Domain, wbinfo -u gives me all Users.
The auth via NTLM_AUTH runns too:
/etc/freeradius$ ntlm_auth --request-nt-key --domain=DOMAINNAME
--username=USERNAME
Password:
NT_STATUS_OK: Success (0x0)

I think just FreeRADIUS is configured wrong.
The auth fails, respectively does not take place.

I put the config files and the freeradius -X output in the attachment.
(I removed a few unimportant configfiles to not hit the 100kb limit of
this mailinglist.)

Many thanks in advance!