Hi ,

 

             Thank you very much  for the response  but still i am getting same error can you please suggest accordingly  .I had done 3 different tries in my user file those tries and output is given below

 

Also  i more think i remember while my installation db.ippool file and db.index file where not formed then i had to created those files in respective directory and i had given appropriate permission for that

 

whether it will create any problem ?.... Also   while useing  command rlm_ippool_tool -a ip-pool.db ip-index.db i am getting output as 0 whether is it any problem ?...

 

 

 

 

 

 

 

modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "steve", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 0
    users: Matched DEFAULT at 81
    users: Matched steve at 84
  modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns ok for request 0
  rad_check_password:  Found Auth-Type Local
auth: type Local
auth: user supplied User-Password matches local User-Password
  Processing the post-auth section of radiusd.conf
modcall: entering group post-auth for request 0
rlm_ippool: Could not find nas port information. Return NOOP.
  modcall[post-auth]: module "main_pool" returns noop for request 0
modcall: group post-auth returns noop for request 0
Sending Access-Accept of id 2 to 10.143.71.15:3734
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Framed-IP-Address = 172.16.3.33
        Framed-IP-Netmask = 255.255.255.0
        Framed-Routing = Broadcast-Listen
        Framed-Filter-Id = "std.ppp"
        Framed-MTU = 1500
        Framed-Compression = Van-Jacobson-TCP-IP
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 2 with timestamp 4a3f7d84
Nothing to do.  Sleeping until we see a request.
--------------------------------------------------------------------------

Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "steve", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 0
    users: Matched steve at 82
    users: Matched DEFAULT at 94
  modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns ok for request 0
  rad_check_password:  Found Auth-Type Local
auth: type Local
auth: user supplied User-Password matches local User-Password
  Processing the post-auth section of radiusd.conf
modcall: entering group post-auth for request 0
rlm_ippool: Could not find nas port information. Return NOOP.
  modcall[post-auth]: module "main_pool" returns noop for request 0
modcall: group post-auth returns noop for request 0
Sending Access-Accept of id 3 to 10.143.71.15:3740
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Framed-IP-Address = 172.16.3.33
        Framed-IP-Netmask = 255.255.255.0
        Framed-Routing = Broadcast-Listen
        Framed-Filter-Id = "std.ppp"
        Framed-MTU = 1500
        Framed-Compression = Van-Jacobson-TCP-IP
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 3 with timestamp 4a3f7e1c
Nothing to do.  Sleeping until we see a request.
-----------------------------------------------------------------------------------------------------------------

 

 

 

 

 Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "steve", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 0
    users: Matched steve at 83
  modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns ok for request 0
  rad_check_password:  Found Auth-Type Local
auth: type Local
auth: user supplied User-Password matches local User-Password
  Processing the post-auth section of radiusd.conf
modcall: entering group post-auth for request 0
rlm_ippool: Could not find Pool-Name attribute.
  modcall[post-auth]: module "main_pool" returns noop for request 0
modcall: group post-auth returns noop for request 0
Sending Access-Accept of id 4 to 10.143.71.15:3751
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Framed-IP-Address = 172.16.3.33
        Framed-IP-Netmask = 255.255.255.0
        Framed-Routing = Broadcast-Listen
        Framed-Filter-Id = "std.ppp"
        Framed-MTU = 1500
        Framed-Compression = Van-Jacobson-TCP-IP
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 4 with timestamp 4a3f7ed7
-----------------------------------------------------------------------------------------------------------

 

 

Thanks and regards
Jos george.
9844459056