rad_recv: Accounting-Request packet from host xxxxxxxxxx:1646, id=114, length=168
        Acct-Session-Id = "0C0C0C1400000071"
        Framed-Protocol = PPP
        Framed-Route = "xxxxxxxx 255.255.255.0"
        Framed-IP-Address = xxxxxxxxx
        User-Name = "xxxxxx"
        Acct-Session-Time = 177
        Acct-Input-Octets = 10056
        Acct-Output-Octets = 9579
        Acct-Input-Packets = 147
        Acct-Output-Packets = 125
        Acct-Authentic = RADIUS
        Acct-Status-Type = Interim-Update
        NAS-Port-Type = Virtual
        NAS-Port = 0
        NAS-Port-Id = "0/0/1/130"
        Service-Type = Framed-User
        NAS-IP-Address = xxxxxxx

        Acct-Delay-Time = 0

 

 

when i try it from a cisco pix to same freeradius, the answer is different

     

 

 

 rad_recv: Access-Request packet from host xxxxxxx:1025, id=157, length=123
        User-Name = "xxxxxx"
        User-Password = "xxxxxxxx"
        NAS-IP-Address = 10.x.x.254
        NAS-Port = 157
        NAS-Port-Type = Virtual
        Cisco-AVPair = "ip:source-ip=10.x.x.x"
        Calling-Station-Id = "ip:source-ip=10.x.x.x"

 

both cisco, 1841 and pix authenticate in the same freeradius

 

why?

 

how i can configurate the cisco 1841 to receive the information of the nas-port and Calling-Station-Id ?

 

 

thanks.