Hi.

I have been struggling with this for about a week now.  We just purchased an HP M200 access point to replace an old cisco.

We are using EAP-TLS using certificates.

Here is what I have done so far.

I have both access points using the same freeRadius2 server which is running FreeBSD 9

The client can authenticate using the certificate through the cisco.

The client can authenticate using PAP through the HP

The client cannot authenticate using the certificate through the HP. 

I get the following message

Cleaning up request 0 ID 206 with timestamp +281

WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

WARNING: !! EAP session for state 0xe4bd4b63e4b14652 did not finish!

WARNING: !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility

WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Cleaning up request 1 ID 248 with timestamp +281

Cleaning up request 2 ID 239 with timestamp +281

Cleaning up request 3 ID 167 with timestamp +281

Cleaning up request 4 ID 102 with timestamp +281

WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

WARNING: !! EAP session for state 0x8c4bc3ec8f5acec4 did not finish!

WARNING: !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility

WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I have looked through everything I can find and I can’t seem to get it to work.

Gordon Cook

Network Administrator

Sault Ste Marie Innovation Centre

Work: 705-942-6938 x3042

Cell:     705-971-3852