Hi,

Can somebody indicates me if there is any log that can help me identifying the problem with my Windows XP client trying to authenticate to the radius server.

I do not know how to interpret the RADIUS/DECODE: parse response no app start; FAIL since no communication was establish between the AP and the radius server.

Thanks for your help

Stephane

The following is the debug output from the Ciso AP

dot11_auth_dot1x_send_id_req_to_client: Sending identity request to 0012.f078.xxxx

*dot11_auth_dot1x_send_id_req_to_client: Client 0012.f078.xxxx timer started for 30 seconds

* dot11_auth_dot1x_run_rfsm: Executing Action(CLIENT_WAIT,TIMEOUT) for 0012.f078.xxxx

*dot11_auth_dot1x_send_client_fail: Authentication failed for 0012.f078.xxxx

*%DOT11-7-AUTH_FAILED: Station 0012.f078.xxxx Authentication failed

*dot11_auth_dot1x_send_id_req_to_client: Sending identity request to 0012.f078.xxxx

*dot11_auth_dot1x_send_id_req_to_client: Client 0012.f078.xxxx timer started for 30 seconds

* dot11_auth_dot1x_run_rfsm: Executing Action(CLIENT_WAIT,EAP_START) for 0012.f078.xxxx

* dot11_auth_dot1x_send_id_req_to_client: Sending identity request to 0012.f078.xxxx

* dot11_auth_dot1x_send_id_req_to_client: Client 0012.f078.xxxx timer started for 30 seconds

* dot11_auth_dot1x_run_rfsm: Executing Action(CLIENT_WAIT,CLIENT_REPLY) for 0012.f078.xxxx

*dot11_auth_dot1x_send_response_to_server: Sending client 0012.f078.xxxx data to server

* dot11_auth_dot1x_send_response_to_server: Started timer server_timeout 60 seconds

RADIUS/ENCODE(0000001A):Orig. component type = DOT11

*RADIUS: AAA Unsupported Attr: ssid [263] 14

*RADIUS: 4D 6F 6E 6F 6E 63 6C 65 5F 53 74 65 [test]

*RADIUS: AAA Unsupported Attr: interface [156] 3

RADIUS: 32 [2]

RADIUS(0000001A): Storing nasport 281 in rad_db

RADIUS(0000001A): Config NAS IP: 10.5.104.22

RADIUS/ENCODE(0000001A): acct_session_id: 26

RADIUS(0000001A): sending

RADIUS/DECODE: parse response no app start; FAIL

RADIUS/DECODE: parse response; FAIL

dot11_auth_dot1x_run_rfsm: Executing Action(SERVER_WAIT,SERVER_FAIL) for 0012.f078.xxxx

dot11_auth_dot1x_send_response_to_client: Forwarding serve r message to client 0012.f078.xxxx

dot11_auth_dot1x_send_response_to_client: Started timer client_timeout 30 seconds

*dot11_auth_dot1x_send_client_fail: Authentication failed for 0012.f078.xxxx

*dot11_auth_dot1x_send_id_req_to_client: Sending identity request to 0012.f078.xxxx

dot11_auth_dot1x_send_id_req_to_client: Client 0012.f078.xxxx timer started for 30 seconds