hello,
still with the same issue about vlan assignment.
so to sum up
In my users file:
############
doctor Cleartext-Password := "mypass"
cisco-avpair= "tunnel-type(#64)=VLAN(13)",
cisco-avpair= "tunnel-medium-type(#65) = 802 media(6)",
cisco-avpair= "tunnel-private-group-ID(#81) = 100",
Session-Timeout = "28800",
Termination-Action = "RADIUS-Request"
#######################
in my switch
--------------------
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
dot1x system-auth-control
!
interface FastEthernet0/24 => for successful authentication ( client is wired there)
switchport access vlan 100
switchport mode access
dot1x pae authenticator
dot1x port-control auto
dot1x auth-fail vlan 120
spanning-tree portfast
interface FastEthernet0/22
switchport access vlan 120
switchport mode access
spanning-tree portfast
!
interface FastEthernet0/23
switchport access vlan 120
switchport mode access
spanning-tree portfast
radius-server host x.x.x.x auth-port 1812 acct-port 1813 key miamiam
radius-server source-ports 1645-1646
radius-server retransmit 5
radius-server vsa send authentication
---------------------------
so the authentication for doctor is good in vlan 100, but if i change to cisco-avpair= "tunnel-private-group-ID(#81) = 120", i'm stuck to vlan 100.
Any noe can help me?
thanks
2010/3/4 Alan DeKok
<aland@deployingradius.com>
Jens Link wrote:
> @Alan: I would document VMPS in some more detail in the wiki if my
> access would be working. ;-)
It seems to be fine now.
Alan DeKok.