Am Donnerstag, 7. Februar 2013, 23:51:34 schrieb Norman Zhang:

> Hi,

> Using freeradius2-2.1.12. I need to setup read-write access for both Cisco

> NX-OS and IOS devices. I did the following,

> DEFAULT Group == operator-rw, Auth-Type = System

> Service-Type = NAS-Prompt-User,

> cisco-avpair := "shell:roles*\"network-admin vdc-admin

> priv-lvl=15\""

> I can log into both NX-OS and IOS devices; however, IOS devices only

> permits exec mode not the privileged exec (enable) mode. Not sure if I'm

> doing something wrong on the syntax. Can someone give me few pointers?

> Norman

Hi,

especially the section "Command Authorization", last paragraph.

Your configuration should work, but in a move by Cisco to make TACACS superior

to RADIUS they compiled their IOS so that this AV pair does not work.

I have a feature request at Cisco to improve the situation. I am really

looking forward when Cisco will implement it.

Greetings,

Michael Schwartzkopff

[*] sys4 AG

http://sys4.de, +49 (89) 30 90 46 64

Franziskanerstraße 15, 81669 München

Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263

Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer

Aufsichtsratsvorsitzender: Joerg Heidrich