FreeRADIUS Version 3.0.21
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/ldap
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/accounting
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/sites-enabled/default
main {
 security {
 	user = "freerad"
 	group = "freerad"
 	allow_core_dumps = no
 }
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
}
main {
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	sbindir = "/usr/sbin"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
	libdir = "/usr/lib/freeradius"
	radacctdir = "/var/log/freeradius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 16384
	pidfile = "/var/run/freeradius/freeradius.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = no
 log {
 	stripped_names = no
 	auth = yes
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
 	max_attributes = 200
 	reject_delay = 1.000000
 	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
 	retry_delay = 5
 	retry_count = 3
 	default_fallback = no
 	dead_time = 120
 	wake_all_if_all_dead = no
 }
 home_server localhost {
 	ipaddr = 127.0.0.1
 	port = 1812
 	type = "auth"
 	secret = <<< secret >>>
 	response_window = 20.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 120
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	nas_type = "other"
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client localhost_ipv6 {
 	ipv6addr = ::1
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client private-network-1 {
 	ipaddr = 192.168.31.0/24
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	virtual_server = "default"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
Debugger not attached
systemd watchdog is disabled
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = LDAP
/etc/freeradius/3.0/sites-enabled/default[557]: Duplicate Auth-Type 'eap'
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/var/log/freeradius/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog {
  	filename = "/var/log/freeradius/linelog"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = "This is a log message for %{User-Name}"
  	reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
  	filename = "/var/log/freeradius/linelog-accounting"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = ""
  	reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  always invalid {
  	rcode = "invalid"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  always userlock {
  	rcode = "userlock"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
   passchange {
   }
  	allow_retry = yes
  	winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
  	hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
  	filename = "/var/log/freeradius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
  	default_eap_type = "ttls"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	cisco_accounting_username_bug = no
  	max_sessions = 16384
  }
  # Loaded module rlm_detail
  # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_ldap
  # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
  ldap {
  	server = "server.ldapp.com"
  	port = 389
  	identity = "uid=api.readonly@domain-x.com,dc=server,dc=ldapp,dc=com"
  	password = <<< secret >>>
   sasl {
   }
  	edir_autz = yes
   user {
   	scope = "sub"
   	access_positive = yes
    sasl {
    }
   }
   group {
   	filter = "(objectClass=posixGroup)"
   	scope = "sub"
   	name_attribute = "cn"
   	membership_attribute = "memberOf"
   	cacheable_name = no
   	cacheable_dn = no
   	allow_dangling_group_ref = no
   }
   client {
   	filter = "(objectClass=radiusClient)"
   	scope = "sub"
   	base_dn = "ou=users,dc=server,dc=ldapp,dc=com"
   }
   profile {
   }
   options {
   	ldap_debug = 40
   	chase_referrals = yes
   	rebind = yes
   	net_timeout = 15
   	res_timeout = 10
   	srv_timelimit = 3
   	idle = 60
   	probes = 3
   	interval = 3
   }
   tls {
   	start_tls = yes
   	require_cert = "allow"
   }
  }
Creating attribute LDAP-Group
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_exec
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
  	radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\\"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  detail {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
  	filename = "/etc/passwd"
  	format = "*User-Name:Crypt-Password:"
  	delimiter = ":"
  	ignore_nislike = no
  	ignore_empty = yes
  	allow_multiple_keys = no
  	hash_size = 100
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
  	driver = "rlm_cache_rbtree"
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 0
  	epoch = 0
  	add_stats = no
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
  	filename = "/etc/freeradius/3.0/mods-config/files/authorize"
  	acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
  	preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
  	normalise = yes
  }
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
  # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
  	wait = yes
  	program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  	shell_escape = yes
  }
  instantiate {
  }
  # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
   	challenge = "Password: "
   	auth_type = "pap"
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
   	tls = "tls-common"
   	default_eap_type = "gtc"
   	copy_request_to_tunnel = yes
   	use_tunneled_reply = yes
   	virtual_server = "default"
   	include_length = yes
   	require_client_cert = no
   }
   tls-config tls-common {
   	verify_depth = 0
   	ca_path = "/etc/freeradius/3.0/certs"
   	pem_file_type = yes
   	private_key_file = "/etc/freeradius/wpwebhook.pem"
   	certificate_file = "/etc/freeradius/wpwebhook.pem"
   	ca_file = "/etc/ssl/certs/ca-certificates.crt"
   	dh_file = "/etc/freeradius/3.0/certs/dh"
   	fragment_size = 1024
   	include_length = yes
   	auto_chain = yes
   	check_crl = no
   	check_all_crl = no
   	cipher_list = "DEFAULT"
   	cipher_server_preference = no
   	ecdh_curve = "prime256v1"
   	tls_max_version = ""
   	tls_min_version = "1.2"
    cache {
    	enable = no
    	lifetime = 24
    	name = "EAP module"
    	max_entries = 255
    }
    verify {
    	skip_if_ocsp_ok = no
    }
    ocsp {
    	enable = no
    	override_cert_url = yes
    	url = "http://127.0.0.1/ocsp/"
    	use_nonce = yes
    	timeout = 0
    	softfail = no
    }
   }
  # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20447
   accounting {
   	reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
   	reference = "."
   }
rlm_ldap (ldap): Initialising connection pool
   pool {
   	start = 5
   	min = 3
   	max = 32
   	spare = 10
   	uses = 0
   	lifetime = 0
   	cleanup_interval = 30
   	idle_timeout = 60
   	retry_delay = 30
   	spread = no
   }
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldap://server,.ldapp.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldap://server.ldapp.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldap://server.ldapp.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap): Connecting to ldap://server.ldapp.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap): Connecting to ldap://server.ldapp.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
  # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" 	found in filter list for realm "DEFAULT". 
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" 	found in filter list for realm "DEFAULT". 
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-auth {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
 # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336
} # server inner-tunnel
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
  	type = "auth"
  	ipaddr = 127.0.0.1
  	port = 18120
}
listen {
  	type = "auth"
  	ipaddr = 192.168.31.183
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "auth"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address 192.168.31.183 port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Ready to process requests
(0) Received Access-Request Id 140 from 192.168.31.238:32772 to 192.168.31.183:1812 length 303
(0)   User-Name = "joker@domain-xx.com"
(0)   Chargeable-User-Identity = 0x00
(0)   Location-Capable = Civic-Location
(0)   Calling-Station-Id = "90-78-41-00-00-00"
(0)   Called-Station-Id = "00-b7-71-00-00-00:testrd"
(0)   NAS-Port = 1
(0)   Cisco-AVPair = "audit-session-id=c0a81fee0001c70f5feb5e92"
(0)   Acct-Session-Id = "5feb5e8a/90:78:41:4f:dd:73/278648"
(0)   NAS-IP-Address = 192.168.31.238
(0)   NAS-Identifier = "wlc238"
(0)   Airespace-Wlan-Id = 5
(0)   Service-Type = Framed-User
(0)   Framed-MTU = 1300
(0)   NAS-Port-Type = Wireless-802.11
(0)   Tunnel-Type:0 = VLAN
(0)   Tunnel-Medium-Type:0 = IEEE-802
(0)   Tunnel-Private-Group-Id:0 = "96"
(0)   EAP-Message = 0x0202001f016665726e616e646f2e7269626569726f406a756d69612e636f6d
(0)   Message-Authenticator = 0x8615267a87fbffb1ac89498f9e561ff5
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(0) auth_log:    --> /var/log/freeradius/radacct/192.168.31.238/auth-detail-20201229
(0) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.31.238/auth-detail-20201229
(0) auth_log: EXPAND %t
(0) auth_log:    --> Tue Dec 29 16:51:30 2020
(0)     [auth_log] = ok
(0) eap: Peer sent EAP Response (code 2) ID 2 length 31
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_ttls to process data
(0) eap_ttls: Initiating new TLS session
(0) eap_ttls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 3 length 6
(0) eap: EAP session adding &reply:State = 0xfc04b034fc07a583
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   Post-Auth-Type Challenge {
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0) attr_filter.access_challenge: EXPAND %{User-Name}
(0) attr_filter.access_challenge:    --> joker@domain-xx.com
(0) attr_filter.access_challenge: Matched entry DEFAULT at line 12
(0)     [attr_filter.access_challenge.post-auth] = updated
(0)   } # Post-Auth-Type Challenge = updated
(0) Sent Access-Challenge Id 140 from 192.168.31.183:1812 to 192.168.31.238:32772 length 0
(0)   EAP-Message = 0x010300061520
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0xfc04b034fc07a583ae24f21be9755ad5
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 141 from 192.168.31.238:32772 to 192.168.31.183:1812 length 453
(1)   User-Name = "joker@domain-xx.com"
(1)   Chargeable-User-Identity = 0x00
(1)   Location-Capable = Civic-Location
(1)   Calling-Station-Id = "90-78-41-00-00-00"
(1)   Called-Station-Id = "00-b7-71-00-00-00:testrd"
(1)   NAS-Port = 1
(1)   Cisco-AVPair = "audit-session-id=c0a81fee0001c70f5feb5e92"
(1)   Acct-Session-Id = "5feb5e8a/90:78:41:4f:dd:73/278648"
(1)   NAS-IP-Address = 192.168.31.238
(1)   NAS-Identifier = "wlc238"
(1)   Airespace-Wlan-Id = 5
(1)   Service-Type = Framed-User
(1)   Framed-MTU = 1300
(1)   NAS-Port-Type = Wireless-802.11
(1)   Tunnel-Type:0 = VLAN
(1)   Tunnel-Medium-Type:0 = IEEE-802
(1)   Tunnel-Private-Group-Id:0 = "96"
(1)   EAP-Message = 0x020300a315800000009916030300940100009003035feb5e92c3185b610632247fab2c93dac9f3c0602f8d561d17371e397564fbcc00002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a0100003d000a00080006001d00170018000b00020100000d001a00180804080508060401050102010403050302030202060106030023000000170000ff01000100
(1)   State = 0xfc04b034fc07a583ae24f21be9755ad5
(1)   Message-Authenticator = 0x58b26615e395ccb540391116a5208f54
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(1) auth_log:    --> /var/log/freeradius/radacct/192.168.31.238/auth-detail-20201229
(1) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.31.238/auth-detail-20201229
(1) auth_log: EXPAND %t
(1) auth_log:    --> Tue Dec 29 16:51:30 2020
(1)     [auth_log] = ok
(1) eap: Peer sent EAP Response (code 2) ID 3 length 163
(1) eap: Continuing tunnel setup
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0xfc04b034fc07a583
(1) eap: Finished EAP session with state 0xfc04b034fc07a583
(1) eap: Previous EAP request found for state 0xfc04b034fc07a583, released from the list
(1) eap: Peer sent packet with method EAP TTLS (21)
(1) eap: Calling submodule eap_ttls to process data
(1) eap_ttls: Authenticate
(1) eap_ttls: Continuing EAP-TLS
(1) eap_ttls: Peer indicated complete TLS record size will be 153 bytes
(1) eap_ttls: Got complete TLS record (153 bytes)
(1) eap_ttls: [eaptls verify] = length included
(1) eap_ttls: (other): before SSL initialization
(1) eap_ttls: TLS_accept: before SSL initialization
(1) eap_ttls: TLS_accept: before SSL initialization
(1) eap_ttls: <<< recv TLS 1.3  [length 0094] 
(1) eap_ttls: TLS_accept: SSLv3/TLS read client hello
(1) eap_ttls: >>> send TLS 1.2  [length 003d] 
(1) eap_ttls: TLS_accept: SSLv3/TLS write server hello
(1) eap_ttls: >>> send TLS 1.2  [length 0abf] 
(1) eap_ttls: TLS_accept: SSLv3/TLS write certificate
(1) eap_ttls: >>> send TLS 1.2  [length 014d] 
(1) eap_ttls: TLS_accept: SSLv3/TLS write key exchange
(1) eap_ttls: >>> send TLS 1.2  [length 0004] 
(1) eap_ttls: TLS_accept: SSLv3/TLS write server done
(1) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done
(1) eap_ttls: TLS - In Handshake Phase
(1) eap_ttls: TLS - got 3169 bytes of data
(1) eap_ttls: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 4 length 1024
(1) eap: EAP session adding &reply:State = 0xfc04b034fd00a583
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   Post-Auth-Type Challenge {
(1)     policy remove_reply_message_if_eap {
(1)       if (&reply:EAP-Message && &reply:Reply-Message) {
(1)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(1)       else {
(1)         [noop] = noop
(1)       } # else = noop
(1)     } # policy remove_reply_message_if_eap = noop
(1) attr_filter.access_challenge: EXPAND %{User-Name}
(1) attr_filter.access_challenge:    --> joker@domain-xx.com
(1) attr_filter.access_challenge: Matched entry DEFAULT at line 12
(1)     [attr_filter.access_challenge.post-auth] = updated
(1)   } # Post-Auth-Type Challenge = updated
(1) Sent Access-Challenge Id 141 from 192.168.31.183:1812 to 192.168.31.238:32772 length 0
(1)   EAP-Message = 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
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0xfc04b034fd00a583ae24f21be9755ad5
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 142 from 192.168.31.238:32772 to 192.168.31.183:1812 length 296
(2)   User-Name = "joker@domain-xx.com"
(2)   Chargeable-User-Identity = 0x00
(2)   Location-Capable = Civic-Location
(2)   Calling-Station-Id = "90-78-41-00-00-00"
(2)   Called-Station-Id = "00-b7-71-00-00-00:testrd"
(2)   NAS-Port = 1
(2)   Cisco-AVPair = "audit-session-id=c0a81fee0001c70f5feb5e92"
(2)   Acct-Session-Id = "5feb5e8a/90:78:41:4f:dd:73/278648"
(2)   NAS-IP-Address = 192.168.31.238
(2)   NAS-Identifier = "wlc238"
(2)   Airespace-Wlan-Id = 5
(2)   Service-Type = Framed-User
(2)   Framed-MTU = 1300
(2)   NAS-Port-Type = Wireless-802.11
(2)   Tunnel-Type:0 = VLAN
(2)   Tunnel-Medium-Type:0 = IEEE-802
(2)   Tunnel-Private-Group-Id:0 = "96"
(2)   EAP-Message = 0x020400061500
(2)   State = 0xfc04b034fd00a583ae24f21be9755ad5
(2)   Message-Authenticator = 0x4108dbe1a8d3511ddae067cbad1b32d2
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(2) auth_log:    --> /var/log/freeradius/radacct/192.168.31.238/auth-detail-20201229
(2) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.31.238/auth-detail-20201229
(2) auth_log: EXPAND %t
(2) auth_log:    --> Tue Dec 29 16:51:30 2020
(2)     [auth_log] = ok
(2) eap: Peer sent EAP Response (code 2) ID 4 length 6
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0xfc04b034fd00a583
(2) eap: Finished EAP session with state 0xfc04b034fd00a583
(2) eap: Previous EAP request found for state 0xfc04b034fd00a583, released from the list
(2) eap: Peer sent packet with method EAP TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Authenticate
(2) eap_ttls: Continuing EAP-TLS
(2) eap_ttls: Peer ACKed our handshake fragment
(2) eap_ttls: [eaptls verify] = request
(2) eap_ttls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 5 length 1024
(2) eap: EAP session adding &reply:State = 0xfc04b034fe01a583
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   Post-Auth-Type Challenge {
(2)     policy remove_reply_message_if_eap {
(2)       if (&reply:EAP-Message && &reply:Reply-Message) {
(2)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(2)       else {
(2)         [noop] = noop
(2)       } # else = noop
(2)     } # policy remove_reply_message_if_eap = noop
(2) attr_filter.access_challenge: EXPAND %{User-Name}
(2) attr_filter.access_challenge:    --> joker@domain-xx.com
(2) attr_filter.access_challenge: Matched entry DEFAULT at line 12
(2)     [attr_filter.access_challenge.post-auth] = updated
(2)   } # Post-Auth-Type Challenge = updated
(2) Sent Access-Challenge Id 142 from 192.168.31.183:1812 to 192.168.31.238:32772 length 0
(2)   EAP-Message = 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
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xfc04b034fe01a583ae24f21be9755ad5
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 143 from 192.168.31.238:32772 to 192.168.31.183:1812 length 296
(3)   User-Name = "joker@domain-xx.com"
(3)   Chargeable-User-Identity = 0x00
(3)   Location-Capable = Civic-Location
(3)   Calling-Station-Id = "90-78-41-00-00-00"
(3)   Called-Station-Id = "00-b7-71-00-00-00:testrd"
(3)   NAS-Port = 1
(3)   Cisco-AVPair = "audit-session-id=c0a81fee0001c70f5feb5e92"
(3)   Acct-Session-Id = "5feb5e8a/90:78:41:4f:dd:73/278648"
(3)   NAS-IP-Address = 192.168.31.238
(3)   NAS-Identifier = "wlc238"
(3)   Airespace-Wlan-Id = 5
(3)   Service-Type = Framed-User
(3)   Framed-MTU = 1300
(3)   NAS-Port-Type = Wireless-802.11
(3)   Tunnel-Type:0 = VLAN
(3)   Tunnel-Medium-Type:0 = IEEE-802
(3)   Tunnel-Private-Group-Id:0 = "96"
(3)   EAP-Message = 0x020500061500
(3)   State = 0xfc04b034fe01a583ae24f21be9755ad5
(3)   Message-Authenticator = 0xe4ccf5a110e9d63a65ce9baf39232388
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(3) auth_log:    --> /var/log/freeradius/radacct/192.168.31.238/auth-detail-20201229
(3) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.31.238/auth-detail-20201229
(3) auth_log: EXPAND %t
(3) auth_log:    --> Tue Dec 29 16:51:30 2020
(3)     [auth_log] = ok
(3) eap: Peer sent EAP Response (code 2) ID 5 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0xfc04b034fe01a583
(3) eap: Finished EAP session with state 0xfc04b034fe01a583
(3) eap: Previous EAP request found for state 0xfc04b034fe01a583, released from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: Continuing EAP-TLS
(3) eap_ttls: Peer ACKed our handshake fragment
(3) eap_ttls: [eaptls verify] = request
(3) eap_ttls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 6 length 1024
(3) eap: EAP session adding &reply:State = 0xfc04b034ff02a583
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   Post-Auth-Type Challenge {
(3)     policy remove_reply_message_if_eap {
(3)       if (&reply:EAP-Message && &reply:Reply-Message) {
(3)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(3)       else {
(3)         [noop] = noop
(3)       } # else = noop
(3)     } # policy remove_reply_message_if_eap = noop
(3) attr_filter.access_challenge: EXPAND %{User-Name}
(3) attr_filter.access_challenge:    --> joker@domain-xx.com
(3) attr_filter.access_challenge: Matched entry DEFAULT at line 12
(3)     [attr_filter.access_challenge.post-auth] = updated
(3)   } # Post-Auth-Type Challenge = updated
(3) Sent Access-Challenge Id 143 from 192.168.31.183:1812 to 192.168.31.238:32772 length 0
(3)   EAP-Message = 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
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0xfc04b034ff02a583ae24f21be9755ad5
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 144 from 192.168.31.238:32772 to 192.168.31.183:1812 length 296
(4)   User-Name = "joker@domain-xx.com"
(4)   Chargeable-User-Identity = 0x00
(4)   Location-Capable = Civic-Location
(4)   Calling-Station-Id = "90-78-41-00-00-00"
(4)   Called-Station-Id = "00-b7-71-00-00-00:testrd"
(4)   NAS-Port = 1
(4)   Cisco-AVPair = "audit-session-id=c0a81fee0001c70f5feb5e92"
(4)   Acct-Session-Id = "5feb5e8a/90:78:41:4f:dd:73/278648"
(4)   NAS-IP-Address = 192.168.31.238
(4)   NAS-Identifier = "wlc238"
(4)   Airespace-Wlan-Id = 5
(4)   Service-Type = Framed-User
(4)   Framed-MTU = 1300
(4)   NAS-Port-Type = Wireless-802.11
(4)   Tunnel-Type:0 = VLAN
(4)   Tunnel-Medium-Type:0 = IEEE-802
(4)   Tunnel-Private-Group-Id:0 = "96"
(4)   EAP-Message = 0x020600061500
(4)   State = 0xfc04b034ff02a583ae24f21be9755ad5
(4)   Message-Authenticator = 0xc80bd54e5ac0586527e1fc1e5832c363
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(4) auth_log:    --> /var/log/freeradius/radacct/192.168.31.238/auth-detail-20201229
(4) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.31.238/auth-detail-20201229
(4) auth_log: EXPAND %t
(4) auth_log:    --> Tue Dec 29 16:51:30 2020
(4)     [auth_log] = ok
(4) eap: Peer sent EAP Response (code 2) ID 6 length 6
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0xfc04b034ff02a583
(4) eap: Finished EAP session with state 0xfc04b034ff02a583
(4) eap: Previous EAP request found for state 0xfc04b034ff02a583, released from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: Continuing EAP-TLS
(4) eap_ttls: Peer ACKed our handshake fragment
(4) eap_ttls: [eaptls verify] = request
(4) eap_ttls: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 7 length 137
(4) eap: EAP session adding &reply:State = 0xfc04b034f803a583
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   Post-Auth-Type Challenge {
(4)     policy remove_reply_message_if_eap {
(4)       if (&reply:EAP-Message && &reply:Reply-Message) {
(4)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(4)       else {
(4)         [noop] = noop
(4)       } # else = noop
(4)     } # policy remove_reply_message_if_eap = noop
(4) attr_filter.access_challenge: EXPAND %{User-Name}
(4) attr_filter.access_challenge:    --> joker@domain-xx.com
(4) attr_filter.access_challenge: Matched entry DEFAULT at line 12
(4)     [attr_filter.access_challenge.post-auth] = updated
(4)   } # Post-Auth-Type Challenge = updated
(4) Sent Access-Challenge Id 144 from 192.168.31.183:1812 to 192.168.31.238:32772 length 0
(4)   EAP-Message = 0x01070089158000000c615dd31e88361097d101a78fe9f5eb026c1c364aa9c91033882fd3dc1bced167c8cad8257f53dad53b515f945ef5d48e46aa6c455661b44b3e28127d27995dbe65c3b48daad3e6216b7aeeefc1dba79ef04f7d216d870bf907b30932391bcdda47b489d1007c0c29ab4418163f8c9800fd4ef61337518016030300040e000000
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0xfc04b034f803a583ae24f21be9755ad5
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 145 from 192.168.31.238:32772 to 192.168.31.183:1812 length 426
(5)   User-Name = "joker@domain-xx.com"
(5)   Chargeable-User-Identity = 0x00
(5)   Location-Capable = Civic-Location
(5)   Calling-Station-Id = "90-78-41-00-00-00"
(5)   Called-Station-Id = "00-b7-71-00-00-00:testrd"
(5)   NAS-Port = 1
(5)   Cisco-AVPair = "audit-session-id=c0a81fee0001c70f5feb5e92"
(5)   Acct-Session-Id = "5feb5e8a/90:78:41:4f:dd:73/278648"
(5)   NAS-IP-Address = 192.168.31.238
(5)   NAS-Identifier = "wlc238"
(5)   Airespace-Wlan-Id = 5
(5)   Service-Type = Framed-User
(5)   Framed-MTU = 1300
(5)   NAS-Port-Type = Wireless-802.11
(5)   Tunnel-Type:0 = VLAN
(5)   Tunnel-Medium-Type:0 = IEEE-802
(5)   Tunnel-Private-Group-Id:0 = "96"
(5)   EAP-Message = 0x0207008815800000007e160303004610000042410476c896968d3cd6d3fb70dbcb9ac7cdfd7d46e1adc6e15996da4c8db7bd4dcd449cbafa7ef9380a15f5e5f7be931e45d1ce532b2232a8a36e67202a6f5f8da6e7140303000101160303002800000000000000005402069097e47aeacd8271d86cca28b40326a20cecca45c8d826a5f2c3bb8e12
(5)   State = 0xfc04b034f803a583ae24f21be9755ad5
(5)   Message-Authenticator = 0xc62ca07cd9fe61d20372c5841a65b3c2
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(5) auth_log:    --> /var/log/freeradius/radacct/192.168.31.238/auth-detail-20201229
(5) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.31.238/auth-detail-20201229
(5) auth_log: EXPAND %t
(5) auth_log:    --> Tue Dec 29 16:51:30 2020
(5)     [auth_log] = ok
(5) eap: Peer sent EAP Response (code 2) ID 7 length 136
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0xfc04b034f803a583
(5) eap: Finished EAP session with state 0xfc04b034f803a583
(5) eap: Previous EAP request found for state 0xfc04b034f803a583, released from the list
(5) eap: Peer sent packet with method EAP TTLS (21)
(5) eap: Calling submodule eap_ttls to process data
(5) eap_ttls: Authenticate
(5) eap_ttls: Continuing EAP-TLS
(5) eap_ttls: Peer indicated complete TLS record size will be 126 bytes
(5) eap_ttls: Got complete TLS record (126 bytes)
(5) eap_ttls: [eaptls verify] = length included
(5) eap_ttls: TLS_accept: SSLv3/TLS write server done
(5) eap_ttls: <<< recv TLS 1.2  [length 0046] 
(5) eap_ttls: TLS_accept: SSLv3/TLS read client key exchange
(5) eap_ttls: TLS_accept: SSLv3/TLS read change cipher spec
(5) eap_ttls: <<< recv TLS 1.2  [length 0010] 
(5) eap_ttls: TLS_accept: SSLv3/TLS read finished
(5) eap_ttls: >>> send TLS 1.2  [length 0001] 
(5) eap_ttls: TLS_accept: SSLv3/TLS write change cipher spec
(5) eap_ttls: >>> send TLS 1.2  [length 0010] 
(5) eap_ttls: TLS_accept: SSLv3/TLS write finished
(5) eap_ttls: (other): SSL negotiation finished successfully
(5) eap_ttls: TLS - Connection Established
(5) eap_ttls: Attr-156.7 = 0x45434448452d5253412d4145533235362d47434d2d534841333834
(5) eap_ttls: Attr-155.7 = 0x544c5320312e32
(5) eap_ttls: TLS - got 51 bytes of data
(5) eap_ttls: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 8 length 61
(5) eap: EAP session adding &reply:State = 0xfc04b034f90ca583
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   Post-Auth-Type Challenge {
(5)     policy remove_reply_message_if_eap {
(5)       if (&reply:EAP-Message && &reply:Reply-Message) {
(5)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(5)       else {
(5)         [noop] = noop
(5)       } # else = noop
(5)     } # policy remove_reply_message_if_eap = noop
(5) attr_filter.access_challenge: EXPAND %{User-Name}
(5) attr_filter.access_challenge:    --> joker@domain-xx.com
(5) attr_filter.access_challenge: Matched entry DEFAULT at line 12
(5)     [attr_filter.access_challenge.post-auth] = updated
(5)   } # Post-Auth-Type Challenge = updated
(5) session-state: Saving cached attributes
(5)   Attr-156.7 = 0x45434448452d5253412d4145533235362d47434d2d534841333834
(5)   Attr-155.7 = 0x544c5320312e32
(5) Sent Access-Challenge Id 145 from 192.168.31.183:1812 to 192.168.31.238:32772 length 0
(5)   EAP-Message = 0x0108003d1580000000331403030001011603030028c34857c0f20068606675d9b046e010de603f0002f64bfe4325c7d774f64ade3bbc0322de50bd6530
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0xfc04b034f90ca583ae24f21be9755ad5
(5) Finished request
Waking up in 4.8 seconds.
(0) Cleaning up request packet ID 140 with timestamp +61
(1) Cleaning up request packet ID 141 with timestamp +61
(2) Cleaning up request packet ID 142 with timestamp +61
(3) Cleaning up request packet ID 143 with timestamp +61
(4) Cleaning up request packet ID 144 with timestamp +61
(5) Cleaning up request packet ID 145 with timestamp +61
Ready to process requests