Hi,

Thank you for your reply.

Here, radius server is at /usr/local/etc/raddb/ (which is on pc side) and I have configured and put my client which is at /etc/raddb/server.

When I am getting " pam_radius_auth: packet from RADIUS server 192.168.100.27 fails verification: The shared secret is probably incorrect."  on my radius client.

I am getting below error message on my client.
"
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!    Replacing User-Password in config items with Cleartext-Password.     !!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!! Please update your configuration so that the "known good"               !!!
!!! clear text password is in Cleartext-Password, and not in User-Password. !!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# Executing group from file /usr/local/etc/raddb//sites-enabled/default
+- entering group PAP {...}
[pap] login attempt with password "?U��?R�S4?H�0+R�"
[pap] Using clear text password "test"
[pap] Passwords don't match
++[pap] returns reject
Failed to authenticate the user.
  WARNING: Unprintable characters in the password.  Double-check the shared secret on the server and the NAS!
Using Post-Auth-Type Reject
"

Regards,
Deep



On Tue, Oct 30, 2012 at 10:58 AM, Fajar A. Nugraha <list@fajar.net> wrote:
On Tue, Oct 30, 2012 at 12:14 PM, Deep Shah <deep.shah@strixsystems.com> wrote:
> Please find below my pam_radius_auth.conf file snap shot.
> #  pam_radius_auth configuration file.  Copy to: /etc/raddb/server

Is it in the correct place?

Since your earlier logs says "/usr/local/etc/raddb", you might also
try copying the file there, just in case.

> Please find below my client.conf file snap shot which is taken from server
> side. My client IP is 192.168.100.18 and my server IP is 192.168.100.27.

That's not what you said in your earlier post

> Can you please let me know which configuration is wrong if there is any?

Not sure.

For this I'd actually suggest you start with known good working
config. Either RHEL/Centos or Ubuntu/Debian is usually a good place to
start. IIRC last time I tested this with RHEL it works just fine.
Assuming you configure it correctly (hint: read the READMEs and docs
that comes with the source/package).

After you at least got THAT to work, then start working on your
busybox-thingy. Just in case it's busybox-specific bug, in which case
you should probably ask the devs there.

--
Fajar
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html