The 2626 supports 1 VLAN per port.  I'm not sure exactly how the 2626 deals with multiple supplicants... but I would bet (based on passed experience on other switches)... the 2626 ignores all 802.1x (EAP Starts) from any subsequent endpoints after the first successful authentication (until the port sees link-down or an EAP logoff form the original supplicant).  Whatever provisioning (VLANs in your case) is based on the first endpoints authentication/authorization? all other endpoints will share the same level of access as the first (authenticated supplicant). 
 
Jeff


-------- Original Message --------
Subject: RE: assigning a vlan-id after successful authentication
From: "Seferovic Edvin" <edvin.seferovic@kolp.at>
Date: Sun, November 13, 2005 2:35 pm
To: "'FreeRadius users mailing list'"
<freeradius-users@lists.freeradius.org>

Sure ? but that ain't working.. at least not on my switches and don't ask me why... I usually have 2-3 computers on one port ( but computers have the same VLANID in RADIUS ), so might that be the problem?

 

Regards,

 

Edvin Seferovic

 

From: freeradius-users-bounces@lists.freeradius.org [mailto:freeradius-users-bounces@lists.freeradius.org] On Behalf Of Jeff Reilly
Sent: Sonntag, 13. November 2005 21:58
To: FreeRadius users mailing list
Subject: RE: assigning a vlan-id after successful authentication

 

First, this information is well documented both by ProCurve and in RFC3580.  

 

That said the AV pairs you're looking for are as follows:

Tunnel-Medium-Type = 802

Tunnel-Private-Group-ID = 123 (the VLAN)

Tunnel-Type = VLAN

 

Jeff


-------- Original Message --------
Subject: assigning a vlan-id after successful authentication
From: Sven Juergensen <sjuergensen@tng.de>
Date: Fri, November 11, 2005 8:48 pm
To: freeradius-users@lists.freeradius.org

hello people,

how does the above mentioned work? i am
not quite sure where to start. is it
embedded in the 'Reply-Message' or does
it have to do with the tunnel-types?

i'm trying to supply a vlan-id to an
hp2626 with mac-based authentication.

couldn't find this in the faq or
relevant conf-files either - what am
i missing?

thanks alot in advance,

sven
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html