On Tue, Oct 7, 2008 at 2:36 PM, Santiago Matiz V
<santimatiz@yahoo.com> wrote:
Hi all
I follow the instructions of Alan :
<http://deployingradius.com/documents/configuration/active_directory.html>
to authenticate ntlm_auth with radius but appers the following message:
" WARNING: Unknown value specified for Auth-Type. Cannot perform requested action.
auth: Failed to validate the user."
what is wrong?
Please help.
Santiago
FreeRADIUS Version 2.0.5, for host i686-pc-linux-gnu, built on Sep 3 2008 at 15:55:02
Copyright (C) 1999-2008 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including configuration file /usr/local/etc/raddb/snmp.conf
including configuration file /usr/local/etc/raddb/eap.conf
including dictionary file /usr/local/etc/raddb/dictionary
main {
prefix = "/usr/local"
localstatedir = "/var"
logdir = "/var/log/radius"
libdir = "/usr/local/lib"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
allow_core_dumps = no
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log_auth = yes
log_auth_badpass = no
log_auth_goodpass = no
log_stripped_names = no
}
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client 192.100.16.11 {
require_message_authenticator = no
secret = "123"
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_check = "none"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
realm DOMAIN.LOC {
authhost = LOCAL
accthost = LOCAL
}
realm DOMAIN {
authhost = LOCAL
accthost = LOCAL
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_expr
Module: Instantiating expr
}
radiusd: #### Loading Virtual Servers ####
server {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_mschap
Module: Instantiating mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --domain=%{mschap:NT-Domain:-DOMAIN} --username=%{mschap:User-Name} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/huntgroups"
hints = "/usr/local/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_realm
Module: Instantiating realmslash
realm realmslash {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
Module: Instantiating suffix
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_eap
Module: Instantiating eap
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/server.pem"
certificate_file = "/usr/local/etc/raddb/certs/server.pem"
CA_file = "/usr/local/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/usr/local/etc/raddb/certs/dh"
random_file = "/usr/local/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to module rlm_files
Module: Instantiating files
files {
usersfile = "/usr/local/etc/raddb/users"
acctusersfile = "/usr/local/etc/raddb/acct_users"
compat = "no"
}
Module: Checking preacct {...} for more modules to load
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port-Id"
}
Module: Linked to module rlm_detail
Module: Instantiating detail
detail {
detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
}
}
radiusd: #### Opening IP addresses and Ports ####
bind_address = *
WARNING: The directive 'bind_adress' is deprecated, and will be removed in future versions of FreeRADIUS. Please edit the configuration files to use the directive 'listen'.
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.100.16.11 port 1308, id=0, length=217
Message-Authenticator = 0x92d1b860b93a1c6d28f08eaa37697101
Service-Type = Framed-User
User-Name = "DOMAIN\\user\000"
Framed-MTU = 1488
Called-Station-Id = "00-16-E0-04-FE-44:pcountry"
Calling-Station-Id = "00-1B-77-4D-1A-74"
NAS-Identifier = "PISO 7 UG SISTEMAS"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x0200001601434c49434f554e5452595c736d6174697a
NAS-IP-Address = 192.100.16.11
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
+- entering group authorize
++[preprocess] returns ok
++[mschap] returns noop
rlm_realm: Looking up realm "DOMAIN" for User-Name = "DOMAIN\user"
rlm_realm: Found realm "DOMAIN"
rlm_realm: Adding Stripped-User-Name = "user"
rlm_realm: Adding Realm = "DOMAIN"
rlm_realm: Authentication realm is LOCAL.
++[realmslash] returns ok
rlm_realm: Request already proxied. Ignoring.
++[suffix] returns ok
rlm_eap: EAP packet type response id 0 length 22
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
users: Matched entry user at line 178
++[files] returns ok
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
WARNING: Unknown value specified for Auth-Type. Cannot perform requested action.
auth: Failed to validate the user.
Login incorrect: [DOMAIN\\user\000] (from client 192.100.16.11 port 1 cli 00-1B-77-4D-1A-74)
Sending Access-Reject of id 0 to 192.100.16.11 port 1308
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.100.16.11 port 1310, id=0, length=217
Message-Authenticator = 0xf829fc414e9407ab04ede033d5a60941
Service-Type = Framed-User
User-Name = "DOMAIN\\user\000"
Framed-MTU = 1488
Called-Station-Id = "00-16-E0-04-FE-44:pcountry"
Calling-Station-Id = "00-1B-77-4D-1A-74"
NAS-Identifier = "PISO 7 UG SISTEMAS"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x0200001601434c49434f554e5452595c736d6174697a
NAS-IP-Address = 192.100.16.11
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
+- entering group authorize
++[preprocess] returns ok
++[mschap] returns noop
rlm_realm: Looking up realm "DOMAIN" for User-Name = "DOMAIN\user"
rlm_realm: Found realm "DOMAIN"
rlm_realm: Adding Stripped-User-Name = "user"
rlm_realm: Adding Realm = "DOMAIN"
rlm_realm: Authentication realm is LOCAL.
++[realmslash] returns ok
rlm_realm: Request already proxied. Ignoring.
++[suffix] returns ok
rlm_eap: EAP packet type response id 0 length 22
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
users: Matched entry user at line 178
++[files] returns ok
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
WARNING: Unknown value specified for Auth-Type. Cannot perform requested action.
auth: Failed to validate the user.
Login incorrect: [DOMAIN\\user\000] (from client 192.100.16.11 port 1 cli 00-1B-77-4D-1A-74)
Sending Access-Reject of id 0 to 192.100.16.11 port 1310
Finished request 1.
Going to the next request
Waking up in 4.7 seconds.
rad_recv: Access-Request packet from host 192.100.16.11 port 1312, id=0, length=217
Message-Authenticator = 0xef8314925f34ccf891d91ca6fa18857d
Service-Type = Framed-User
User-Name = "DOMAIN\\user\000"
Framed-MTU = 1488
Called-Station-Id = "00-16-E0-04-FE-44:pcountry"
Calling-Station-Id = "00-1B-77-4D-1A-74"
NAS-Identifier = "PISO 7 UG SISTEMAS"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x0200001601434c49434f554e5452595c736d6174697a
NAS-IP-Address = 192.100.16.11
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
+- entering group authorize
++[preprocess] returns ok
++[mschap] returns noop
rlm_realm: Looking up realm "DOMAIN" for User-Name = "DOMAIN\user"
rlm_realm: Found realm "DOMAIN"
rlm_realm: Adding Stripped-User-Name = "user"
rlm_realm: Adding Realm = "DOMAIN"
rlm_realm: Authentication realm is LOCAL.
++[realmslash] returns ok
rlm_realm: Request already proxied. Ignoring.
++[suffix] returns ok
rlm_eap: EAP packet type response id 0 length 22
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
users: Matched entry user at line 178
++[files] returns ok
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
WARNING: Unknown value specified for Auth-Type. Cannot perform requested action.
auth: Failed to validate the user.
Login incorrect: [DOMAIN\\user\000] (from client 192.100.16.11 port 1 cli 00-1B-77-4D-1A-74)
Sending Access-Reject of id 0 to 192.100.16.11 port 1312
Finished request 2.
Going to the next request
Waking up in 4.4 seconds.
Cleaning up request 0 ID 0 with timestamp +113
Waking up in 0.2 seconds.
Cleaning up request 1 ID 0 with timestamp +113
Waking up in 0.2 seconds.
Cleaning up request 2 ID 0 with timestamp +114
Ready to process requests.
Santiago Matiz (santimatiz@yahoo.com)
Systems Engineer
Bogotá, Colombia (South America)
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html