instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module
"exec" from file /etc/freeradius/modules/exec
exec {
wait = no
input_pairs =
"request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module
"expr" from file /etc/freeradius/modules/expr
Module: Linked to module
rlm_expiration
Module: Instantiating module
"expiration" from file /etc/freeradius/modules/expiration
expiration {
reply-message = "Password Has
Expired "
}
Module: Linked to module
rlm_logintime
Module: Instantiating module
"logintime" from file /etc/freeradius/modules/logintime
logintime {
reply-message = "You are
calling outside your allowed timespan
"
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
modules {
Module: Creating Auth-Type =
digest
Module: Creating Post-Auth-Type =
REJECT
Module: Checking authenticate {...} for
more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module
"pap" from file /etc/freeradius/modules/pap
pap {
encryption_scheme =
"auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module
"chap" from file /etc/freeradius/modules/chap
Module: Linked to module
rlm_mschap
Module: Instantiating module
"mschap" from file /etc/freeradius/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
allow_retry = yes
}
Module: Linked to module
rlm_digest
Module: Instantiating module
"digest" from file /etc/freeradius/modules/digest
Module: Linked to module rlm_unix
Module: Instantiating module
"unix" from file /etc/freeradius/modules/unix
unix {
radwtmp =
"/var/log/freeradius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module
"eap" from file /etc/freeradius/eap.conf
eap {
default_eap_type =
"md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug =
no
max_sessions = 4096
}
Module: Linked to sub-module
rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module
rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module
rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password:
"
auth_type = "PAP"
}
Module: Linked to sub-module
rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path =
"/etc/freeradius/certs"
pem_file_type = yes
private_key_file =
"/etc/freeradius/certs/server.key"
certificate_file =
"/etc/freeradius/certs/server.pem"
CA_file =
"/etc/freeradius/certs/ca.pem"
private_key_password =
"whatever"
dh_file =
"/etc/freeradius/certs/dh"
random_file =
"/dev/urandom"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list =
"DEFAULT"
make_cert_command =
"/etc/freeradius/certs/bootstrap"
ecdh_curve =
"prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url =
"http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
Module: Linked to sub-module
rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type =
"md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server =
"inner-tunnel"
include_length = yes
}
Module: Linked to sub-module
rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type =
"mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap =
yes
virtual_server =
"inner-tunnel"
soh = no
}
Module: Linked to sub-module
rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Linked to sub-module
rlm_eap_sim
Module: Instantiating eap-sim
Module: Checking authorize {...} for
more modules to load
Module: Linked to module
rlm_preprocess
Module: Instantiating module
"preprocess" from file /etc/freeradius/modules/preprocess
preprocess {
huntgroups =
"/etc/freeradius/huntgroups"
hints =
"/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack =
no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /etc/freeradius/huntgroups
reading pairlist file /etc/freeradius/hints
Module: Linked to module rlm_realm
Module: Instantiating module
"suffix" from file /etc/freeradius/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module
rlm_sim_files
Module: Instantiating module
"sim_files" from file /etc/freeradius/modules/sim_files
sim_files {
simtriplets =
"/etc/freeradius/simtriplets.dat"
}
Module: Linked to module rlm_files
Module: Instantiating module
"files" from file /etc/freeradius/modules/files
files {
usersfile =
"/etc/freeradius/users"
acctusersfile =
"/etc/freeradius/acct_users"
preproxy_usersfile =
"/etc/freeradius/preproxy_users"
compat = "no"
}
reading pairlist file /etc/freeradius/users
reading pairlist file /etc/freeradius/acct_users
reading pairlist file /etc/freeradius/preproxy_users
Module: Checking preacct {...} for more
modules to load
Module: Linked to module
rlm_acct_unique
Module: Instantiating module
"acct_unique" from file /etc/freeradius/modules/acct_unique
acct_unique {
key = "User-Name,
Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port"
}
Module: Checking accounting {...} for
more modules to load
Module: Linked to module
rlm_detail
Module: Instantiating module
"detail" from file /etc/freeradius/modules/detail
detail {
detailfile =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module
rlm_attr_filter
Module: Instantiating module
"attr_filter.accounting_response" from file
/etc/freeradius/modules/attr_filter
attr_filter
attr_filter.accounting_response {
attrsfile =
"/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/freeradius/attrs.accounting_response
Module: Checking session {...} for more
modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating module
"radutmp" from file /etc/freeradius/modules/radutmp
radutmp {
filename =
"/var/log/freeradius/radutmp"
username =
"%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for
more modules to load
Module: Checking post-auth {...} for
more modules to load
Module: Instantiating module
"attr_filter.access_reject" from file
/etc/freeradius/modules/attr_filter
attr_filter attr_filter.access_reject
{
attrsfile =
"/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/freeradius/attrs.access_reject
} # modules
} # server
server inner-tunnel { # from file
/etc/freeradius/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for
more modules to load
Module: Checking authorize {...} for
more modules to load
Module: Checking session {...} for more
modules to load
Module: Checking post-proxy {...} for
more modules to load
Module: Checking post-auth {...} for
more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
... adding new socket proxy address *
port 44396
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on authentication address 127.0.0.1 port 18120 as server
inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.1.1 port 2049, id=137,
length=171
User-Name =
"eap-sim"
NAS-IP-Address = 192.168.1.1
NAS-Port = 0
Called-Station-Id =
"004f62248f98"
Calling-Station-Id = "742f68c46785"
NAS-Identifier = "Realtek
Access Point. 8186"
Framed-MTU = 1400
NAS-Port-Type =
Wireless-802.11
Service-Type = Framed-User
Connect-Info = "CONNECT 11Mbps
802.11b"
EAP-Message =
0x0200000c016561702d73696d
Message-Authenticator = 0x6432f45d624c848645f3a543d5106874
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "eap-sim", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
rlm_sim_files: insufficient number of challenges for
imsi eap-sim: 0
++[sim_files] returns notfound
[eap] EAP packet type response id 0 length 12
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found
for the user. Authentication may fail
because of this.
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 137 to 192.168.1.1 port 2049
EAP-Message =
0x01010016041013eade1b3c80acaa0f32a0685071e09e
Message-Authenticator =
0x00000000000000000000000000000000
State =
0xdc94ac22dc95a819da67496a672facf3
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 2049, id=138,
length=177
User-Name =
"eap-sim"
NAS-IP-Address = 192.168.1.1
NAS-Port = 0
Called-Station-Id =
"004f62248f98"
Calling-Station-Id =
"742f68c46785"
NAS-Identifier = "Realtek
Access Point. 8186"
NAS-Port-Type =
Wireless-802.11
Service-Type = Framed-User
Connect-Info = "CONNECT 11Mbps
802.11b"
EAP-Message = 0x020100060319
State =
0xdc94ac22dc95a819da67496a672facf3
Message-Authenticator = 0xbafec0ba734fd199d3e98590e3e911a9
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "eap-sim", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
rlm_sim_files: insufficient number of challenges for imsi eap-sim: 0
++[sim_files] returns notfound
[eap] EAP packet type response id 1 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of
this.
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 138 to 192.168.1.1 port 2049
EAP-Message = 0x010200061920
Message-Authenticator =
0x00000000000000000000000000000000
State = 0xdc94ac22dd96b519da67496a672facf3
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 2049, id=139,
length=276
User-Name =
"eap-sim"
NAS-IP-Address = 192.168.1.1
NAS-Port = 0
Called-Station-Id = "004f62248f98"
Calling-Station-Id =
"742f68c46785"
NAS-Identifier = "Realtek
Access Point. 8186"
NAS-Port-Type =
Wireless-802.11
Service-Type = Framed-User
Connect-Info = "CONNECT 11Mbps
802.11b"
EAP-Message =
0x0202006919800000005f160301005a01000056030153b0f2e183da8dff7bf5fbd3d92391a1308391d7e7cd38c3ff700cfd36c76166000018002f00350005000ac013c014c009c00a003200380013000401000015ff01000100000a0006000400170018000b00020100
State =
0xdc94ac22dd96b519da67496a672facf3
Message-Authenticator =
0x9cf17efe2d2eec69fe2e8c37d9d752d1
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "eap-sim", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
rlm_sim_files: insufficient number of challenges for imsi eap-sim: 0
++[sim_files] returns notfound
[eap] EAP packet type response id 2 length 105
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 95
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] (other): before/accept
initialization
[peap] TLS_accept: before/accept
initialization
[peap] <<< TLS 1.0 Handshake [length 005a], ClientHello
[peap] TLS_accept: SSLv3 read client
hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello
[peap] TLS_accept: SSLv3 write server
hello A
[peap] >>> TLS 1.0 Handshake [length 01a7], Certificate
[peap] TLS_accept: SSLv3 write
certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap] TLS_accept: SSLv3 write server
done A
[peap] TLS_accept: SSLv3 flush
data
[peap] TLS_accept: Need to read more
data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 139 to 192.168.1.1 port 2049
EAP-Message =
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
EAP-Message =
0xd1608f21ed0adeeb17c1d6a6946c4fdd99876fc1fba94da1bbe1816ff176f1d46caa3fc5fb936f37fae2104213f40a87605b7ce29826aaceab75b9e91aeafa898c51252971bd690f700e5e509bfc4f0cbc51390203010001300d06092a864886f70d0101050500038181003a6ef824822c58464dcccacd831ab2cbe98a01f15f28e0047fbdf16fcf265a40ba086ca72e426e13e28e1e3f7df57ad6b87895651f888580feef1a11f84a74b55578d7e014d31eaeaa75c8d38fa0bfd0f5be3f80b7dbd5c8f0c07111d3ed7790338674c3ef6490db3ac40f20ddf2e6e011c0c4a0520c6d39fec268f451c6555716030100040e000000
Message-Authenticator =
0x00000000000000000000000000000000
State = 0xdc94ac22de97b519da67496a672facf3
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 2049, id=140,
length=188
User-Name =
"eap-sim"
NAS-IP-Address = 192.168.1.1
NAS-Port = 0
Called-Station-Id = "004f62248f98"
Calling-Station-Id =
"742f68c46785"
NAS-Identifier = "Realtek
Access Point. 8186"
NAS-Port-Type =
Wireless-802.11
Service-Type = Framed-User
Connect-Info = "CONNECT 11Mbps
802.11b"
EAP-Message =
0x0203001119800000000715030100020230
State =
0xdc94ac22de97b519da67496a672facf3
Message-Authenticator =
0xe21a6331f4d82016f61351043ccbe860
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "eap-sim", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
rlm_sim_files: insufficient number of challenges for imsi eap-sim: 0
++[sim_files] returns notfound
[eap] EAP packet type response id 3 length 17
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 7
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] <<< TLS 1.0 Alert [length 0002], fatal unknown_ca
TLS Alert read:fatal:unknown CA
TLS_accept: failed in SSLv3 read client certificate A
rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert
unknown ca
SSL: SSL_read failed inside of TLS (-1), TLS session fails.
TLS receive handshake failed during operation
[peap] eaptls_process returned 4
[peap] EAPTLS_OTHERS
[eap] Handler failed in EAP/peap
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type REJECT
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand:
%{User-Name} -> eap-sim
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 3 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 3
Sending Access-Reject of id 140 to 192.168.1.1 port 2049
EAP-Message = 0x04030004
Message-Authenticator =
0x00000000000000000000000000000000
Waking up in 3.9 seconds.
Cleaning up request 0 ID 137 with timestamp +12
Cleaning up request 1 ID 138 with timestamp +12
Cleaning up request 2 ID 139 with timestamp +12
Waking up in 1.0 seconds.
Cleaning up request 3 ID 140 with timestamp +12
Ready to process requests.