On 12 Jul 2013, at 13:57, val john <valjohn1647@gmail.com> wrote:

> Hi guys ,
>
> i have a freeradius setup that works with ldap group authentication ,i also need to configure the dynamic VLAN assignment , so i configured the   "users" file as fallows ,
>
> DEFAULT Ldap-Group == "cn=staff,ou=groups,dc=ldap,dc=example,dc=com"
>         Tunnel-Type = VLAN,
>         Tunnel-Medium-Type = IEEE-802,
>         Tunnel-Private-Group-Id = "100",
>        Reply-Message = "You are Accepted"
>
> DEFAULT Ldap-Group == "cn=nonstaff,ou=groups,dc=ldap,dc=example,dc=com"
>         Tunnel-Type = VLAN,
>         Tunnel-Medium-Type = IEEE-802,
>         Tunnel-Private-Group-Id = "200",
>         Reply-Message = "You are Accepted"
>
> DEFAULT Auth-Type := Reject
>
>
> ,Do  i need any other configuration file to be edited  to get VALN assignment to work ..? or juts  "users" file is enough

Just users file is fine.

Arran Cudbard-Bell <a.cudbardb@freeradius.org>
FreeRADIUS Development Team

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html