Yeah,It runs, and appears "Ready to process requests."
but the problem is that when I try to connect to the server, appears this:
...
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1 port 60270, id=145, length=77
User-Name = "jeisson"
User-Password = "jeisson"
NAS-IP-Address = 127.0.1.1
NAS-Port = 0
Message-Authenticator = 0x551be41a95b990609267894baf79a4df
+- entering group authorize {...}
Violación de segmento
and the server stop.
pdst: the last line from the output is in Spanish, it means "segment fault"
On Mon, Dec 19, 2011 at 4:37 PM, Alan Buxey
<A.L.M.Buxey@lboro.ac.uk> wrote:
Hi,
> well, mm I installed it from the package, I mean,
> sudo apt-get freeradius...
> and the version is 2.1.8,
> It install freeradius on /etc/freeradius.
> And there, I dont find a folder called "docs"
docs should be installed somewhere on the system - use the search tool to find
eg freeradius - maybe in /usr/share/doc/freeradius2 ?
..but you can still run in debug mode...radiusd -X - so at least get that
info