Using freeradius 2.2.4_2 with an LDAP backend serving WPA enterprise wifi clients. I have an issue that I've been stuck on for days. Auth works just fine, but if say a user restarts his OS X Yosemite laptop on reboot it will report loss of network and fail to connect. Looking at radiusd.logs I see an endless loop of Access-Challenge responses but never an accept. Some time later it starts to work when trying to reconnect. 

What am I missing here? Below is the error and my configuration:


##### ERROR
##### ERROR
rad_recv: Access-Request packet from host 10.1.0.6 port 39552, id=173, length=155
User-Name = "user1"
NAS-IP-Address = 10.1.0.6
NAS-Port = 0
Called-Station-Id = "68-86-A7-FF-D0-02:RANDOMSSID"
Calling-Station-Id = "3C-15-C2-B7-DC-80"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11a"
EAP-Message = 0x0203000a01726c616e67
Message-Authenticator = 0xfda339f6e3f3854c5203dd14e0c5c9fc
 Info: # Executing section authorize from file /opt/local/etc/raddb/sites-enabled/default
 Info: +group authorize {
 Info: ++[preprocess] = ok
 Info: ++[mschap] = noop
 Info: [ntdomain] No '\' in User-Name = "user1", looking up realm NULL
 Info: [ntdomain] No such realm "NULL"
 Info: ++[ntdomain] = noop
 Info: [eap] EAP packet type response id 3 length 10
 Info: [eap] No EAP Start, assuming it's an on-going EAP conversation
 Info: ++[eap] = updated
 Info: ++[expiration] = noop
 Info: ++[logintime] = noop
 Info: +} # group authorize = updated
 Info: Found Auth-Type = EAP
 Info: # Executing group from file /opt/local/etc/raddb/sites-enabled/default
 Info: +group authenticate {
 Info: [eap] EAP Identity
 Info: [eap] processing type tls
 Info: [tls] Flushing SSL sessions (of #0)
 Info: [tls] Initiate
 Info: [tls] Start returned 1
 Info: ++[eap] = handled
 Info: +} # group authenticate = handled
Sending Access-Challenge of id 173 to 10.1.0.6 port 39552
EAP-Message = 0x010400061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x652be819652ff13421bf66d7088d793f
 Info: Finished request 0.
 Debug: Going to the next request
 Debug: Waking up in 4.9 seconds.
Thu Nov 13 15:31:49 2014 : Info: Cleaning up request 0 ID 173 with timestamp +60
Thu Nov 13 15:31:49 2014 : Debug: WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thu Nov 13 15:31:49 2014 : Debug: WARNING: !! EAP session for state 0x652be819652ff134 did not finish!
Thu Nov 13 15:31:49 2014 : Debug: WARNING: !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility
Thu Nov 13 15:31:49 2014 : Debug: WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thu Nov 13 15:31:49 2014 : Info: Ready to process requests.
rad_recv: Access-Request packet from host 10.1.0.6 port 39552, id=171, length=155
User-Name = "user1"
NAS-IP-Address = 10.1.0.6
NAS-Port = 0
Called-Station-Id = "68-86-A7-FF-D0-02:f"
Calling-Station-Id = "3C-15-C2-B7-DC-80"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11a"
EAP-Message = 0x0200000a01726c616e67
Message-Authenticator = 0x5713a7f5bda1676ee08343c46dcd5e6f
 Info: # Executing section authorize from file /opt/local/etc/raddb/sites-enabled/default
 Info: +group authorize {
 Info: ++[preprocess] = ok
 Info: ++[mschap] = noop
 Info: [ntdomain] No '\' in User-Name = "user1", looking up realm NULL
 Info: [ntdomain] No such realm "NULL"
 Info: ++[ntdomain] = noop
 Info: [eap] EAP packet type response id 0 length 10
 Info: [eap] No EAP Start, assuming it's an on-going EAP conversation
 Info: ++[eap] = updated
 Info: ++[expiration] = noop
 Info: ++[logintime] = noop
 Info: +} # group authorize = updated
 Info: Found Auth-Type = EAP
 Info: # Executing group from file /opt/local/etc/raddb/sites-enabled/default
 Info: +group authenticate {
 Info: [eap] EAP Identity
 Info: [eap] processing type tls
 Info: [tls] Initiate
 Info: [tls] Start returned 1
 Info: ++[eap] = handled
 Info: +} # group authenticate = handled
Sending Access-Challenge of id 171 to 10.1.0.6 port 39552
EAP-Message = 0x010100061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xac737dcfac726477626749b4614c2b4e
 Info: Finished request 1.
 Debug: Going to the next request
 Debug: Waking up in 4.9 seconds.
 Info: Cleaning up request 1 ID 171 with timestamp +74
 Debug: WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 Debug: WARNING: !! EAP session for state 0xac737dcfac726477 did not finish!
 Debug: WARNING: !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility
 Debug: WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 Info: Ready to process requests.
rad_recv: Access-Request packet from host 10.1.0.6 port 39552, id=172, length=155
User-Name = "user1"
NAS-IP-Address = 10.1.0.6
NAS-Port = 0
Called-Station-Id = "68-86-A7-FF-D0-02:RANDOMSSID"
Calling-Station-Id = "3C-15-C2-B7-DC-80"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11a"
EAP-Message = 0x0201000a01726c616e67
Message-Authenticator = 0x5a371b7db7a108196d1e06bf7805e0a3
 Info: # Executing section authorize from file /opt/local/etc/raddb/sites-enabled/default
 Info: +group authorize {
 Info: ++[preprocess] = ok
 Info: ++[mschap] = noop
 Info: [ntdomain] No '\' in User-Name = "user1", looking up realm NULL
 Info: [ntdomain] No such realm "NULL"
 Info: ++[ntdomain] = noop
 Info: [eap] EAP packet type response id 1 length 10
 Info: [eap] No EAP Start, assuming it's an on-going EAP conversation
 Info: ++[eap] = updated
 Info: ++[expiration] = noop
 Info: ++[logintime] = noop
 Info: +} # group authorize = updated
 Info: Found Auth-Type = EAP
 Info: # Executing group from file /opt/local/etc/raddb/sites-enabled/default
 Info: +group authenticate {
 Info: [eap] EAP Identity
 Info: [eap] processing type tls
 Info: [tls] Initiate
 Info: [tls] Start returned 1
 Info: ++[eap] = handled
 Info: +} # group authenticate = handled
Sending Access-Challenge of id 172 to 10.1.0.6 port 39552
EAP-Message = 0x010200061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xd3dbfc2fd3d9e5d577e0b0bda6fe6517
 Info: Finished request 2.


##### CONFIGURATION
##### CONFIGURATION
 Debug: main {
 Debug: allow_core_dumps = no
 Debug: }
 Debug: including dictionary file /opt/local/etc/raddb/dictionary
 Debug: main {
 Debug: name = "radiusd"
 Debug: prefix = "/opt/local"
 Debug: localstatedir = "/opt/local/var"
 Debug: sbindir = "/opt/local/sbin"
 Debug: logdir = "/opt/local/var/log/radius"
 Debug: run_dir = "/opt/local/var/run/radiusd"
 Debug: libdir = "/opt/local/lib"
 Debug: radacctdir = "/opt/local/var/log/radius/radacct"
 Debug: hostname_lookups = no
 Debug: max_request_time = 30
 Debug: cleanup_delay = 5
 Debug: max_requests = 1024
 Debug: pidfile = "/opt/local/var/run/radiusd/radiusd.pid"
 Debug: checkrad = "/opt/local/sbin/checkrad"
 Debug: debug_level = 0
 Debug: proxy_requests = yes
 Debug:  log {
 Debug:   stripped_names = no
 Debug:   auth = no
 Debug:   auth_badpass = no
 Debug:   auth_goodpass = no
 Debug:  }
 Debug:  security {
 Debug:   max_attributes = 200
 Debug:   reject_delay = 1
 Debug:   status_server = yes
 Debug:  }
 Debug: }
 Debug: radiusd: #### Loading Realms and Home Servers ####
 Debug:  proxy server {
 Debug:   retry_delay = 5
 Debug:   retry_count = 3
 Debug:   default_fallback = no
 Debug:   dead_time = 120
 Debug:   wake_all_if_all_dead = no
 Debug:  }
 Debug:  home_server localhost {
 Debug:   ipaddr = 127.0.0.1
 Debug:   port = 1812
 Debug:   type = "auth"
 Debug:   secret = "testing123"
 Debug:   response_window = 20
 Debug:   max_outstanding = 65536
 Debug:   require_message_authenticator = yes
 Debug:   zombie_period = 40
 Debug:   status_check = "status-server"
 Debug:   ping_interval = 30
 Debug:   check_interval = 30
 Debug:   num_answers_to_alive = 3
 Debug:   num_pings_to_alive = 3
 Debug:   revive_interval = 120
 Debug:   status_check_timeout = 4
 Debug:   coa {
 Debug:   irt = 2
 Debug:   mrt = 16
 Debug:   mrc = 5
 Debug:   mrd = 30
 Debug:   }
 Debug:  }
 Debug:  home_server_pool my_auth_failover {
 Debug: type = fail-over
 Debug: home_server = localhost
 Debug:  }
 Debug:  realm example.com {
 Debug: auth_pool = my_auth_failover
 Debug:  }
 Debug:  realm LOCAL {
 Debug:  }
 Debug: radiusd: #### Loading Clients ####
 Debug:  client localhost {
 Debug:   ipaddr = 127.0.0.1
 Debug:   require_message_authenticator = no
 Debug:   secret = "testing123"
 Debug:   nastype = "other"
 Debug:  }
 Debug:  client 10.1.0.5/32 {
 Debug:   require_message_authenticator = no
 Debug:   secret = "433natoma"
 Debug:   shortname = "cisco_ap1"
 Debug:  }
 Debug:  client 10.1.0.6/32 {
 Debug:   require_message_authenticator = no
 Debug:   secret = "433natoma"
 Debug:   shortname = "cisco_ap2"
 Debug:  }
 Debug: radiusd: #### Instantiating modules ####
 Debug:  instantiate {
 Debug:     (Loaded rlm_exec, checking if it's valid)
 Debug:  Module: Linked to module rlm_exec
 Debug:  Module: Instantiating module "exec" from file /opt/local/etc/raddb/modules/exec
 Debug:   exec {
 Debug:   wait = no
 Debug:   input_pairs = "request"
 Debug:   shell_escape = yes
 Debug:   timeout = 10
 Debug:   }
 Debug:     (Loaded rlm_expr, checking if it's valid)
 Debug:  Module: Linked to module rlm_expr
 Debug:  Module: Instantiating module "expr" from file /opt/local/etc/raddb/modules/expr
 Debug:     (Loaded rlm_expiration, checking if it's valid)
 Debug:  Module: Linked to module rlm_expiration
 Debug:  Module: Instantiating module "expiration" from file /opt/local/etc/raddb/modules/expiration
 Debug:   expiration {
 Debug:   reply-message = "Password Has Expired  "
 Debug:   }
 Debug:     (Loaded rlm_logintime, checking if it's valid)
 Debug:  Module: Linked to module rlm_logintime
 Debug:  Module: Instantiating module "logintime" from file /opt/local/etc/raddb/modules/logintime
 Debug:   logintime {
 Debug:   reply-message = "You are calling outside your allowed timespan  "
 Debug:   minimum-timeout = 60
 Debug:   }
 Debug:  }
 Debug: radiusd: #### Loading Virtual Servers ####
 Debug: server { # from file /opt/local/etc/raddb/radiusd.conf
 Debug:  modules {
 Debug:   Module: Creating Post-Auth-Type = REJECT
 Debug:  Module: Checking authenticate {...} for more modules to load
 Debug:     (Loaded rlm_chap, checking if it's valid)
 Debug:  Module: Linked to module rlm_chap
 Debug:  Module: Instantiating module "chap" from file /opt/local/etc/raddb/modules/chap
 Debug:     (Loaded rlm_mschap, checking if it's valid)
 Debug:  Module: Linked to module rlm_mschap
 Debug:  Module: Instantiating module "mschap" from file /opt/local/etc/raddb/modules/mschap
 Debug:   mschap {
 Debug:   use_mppe = yes
 Debug:   require_encryption = yes
 Debug:   require_strong = yes
 Debug:   with_ntdomain_hack = yes
 Debug:   allow_retry = yes
 Debug:   use_open_directory = yes
 Debug:   }
 Debug:     (Loaded rlm_eap, checking if it's valid)
 Debug:  Module: Linked to module rlm_eap
 Debug:  Module: Instantiating module "eap" from file /opt/local/etc/raddb/eap.conf
 Debug:   eap {
 Debug:   default_eap_type = "peap"
 Debug:   timer_expire = 60
 Debug:   ignore_unknown_eap_types = no
 Debug:   cisco_accounting_username_bug = no
 Debug:   max_sessions = 4096
 Debug:   }
 Debug:  Module: Linked to sub-module rlm_eap_md5
 Debug:  Module: Instantiating eap-md5
 Debug:  Module: Linked to sub-module rlm_eap_leap
 Debug:  Module: Instantiating eap-leap
 Debug:  Module: Linked to sub-module rlm_eap_gtc
 Debug:  Module: Instantiating eap-gtc
 Debug:    gtc {
 Debug:     challenge = "Password: "
 Debug:     auth_type = "PAP"
 Debug:    }
 Debug:  Module: Linked to sub-module rlm_eap_tls
 Debug:  Module: Instantiating eap-tls
 Debug:    tls {
 Debug:     rsa_key_exchange = no
 Debug:     dh_key_exchange = yes
 Debug:     rsa_key_length = 512
 Debug:     dh_key_length = 512
 Debug:     verify_depth = 0
 Debug:     CA_path = "/opt/local/etc/raddb/certs"
 Debug:     pem_file_type = yes
 Debug:     private_key_file = "/opt/local/etc/raddb/certs/server.pem"
 Debug:     certificate_file = "/opt/local/etc/raddb/certs/server.pem"
 Debug:     CA_file = "/opt/local/etc/raddb/certs/ca.pem"
 Debug:     private_key_password = "whatever"
 Debug:     dh_file = "/opt/local/etc/raddb/certs/dh"
 Debug:     fragment_size = 1024
 Debug:     include_length = yes
 Debug:     check_crl = no
 Debug:     cipher_list = "DEFAULT"
 Debug:     make_cert_command = "/opt/local/etc/raddb/certs/bootstrap"
 Debug:     ecdh_curve = "prime256v1"
 Debug:     cache {
 Debug:     enable = yes
 Debug:     lifetime = 24
 Debug:     max_entries = 255
 Debug:     }
 Debug:     verify {
 Debug:     }
 Debug:     ocsp {
 Debug:     enable = no
 Debug:     override_cert_url = yes
 Debug:     url = "http://127.0.0.1/ocsp/"
 Debug:     use_nonce = yes
 Debug:     timeout = 0
 Debug:     softfail = no
 Debug:     }
 Debug:    }
 Debug:  Module: Linked to sub-module rlm_eap_ttls
 Debug:  Module: Instantiating eap-ttls
 Debug:    ttls {
 Debug:     default_eap_type = "md5"
 Debug:     copy_request_to_tunnel = no
 Debug:     use_tunneled_reply = no
 Debug:     virtual_server = "inner-tunnel"
 Debug:     include_length = yes
 Debug:    }
 Debug:  Module: Linked to sub-module rlm_eap_peap
 Debug:  Module: Instantiating eap-peap
 Debug:    peap {
 Debug:     default_eap_type = "mschapv2"
 Debug:     copy_request_to_tunnel = no
 Debug:     use_tunneled_reply = no
 Debug:     proxy_tunneled_request_as_eap = yes
 Debug:     virtual_server = "inner-tunnel"
 Debug:     soh = no
 Debug:    }
 Debug:  Module: Linked to sub-module rlm_eap_mschapv2
 Debug:  Module: Instantiating eap-mschapv2
 Debug:    mschapv2 {
 Debug:     with_ntdomain_hack = no
 Debug:     send_error = no
 Debug:    }
 Debug:  Module: Checking authorize {...} for more modules to load
 Debug:     (Loaded rlm_preprocess, checking if it's valid)
 Debug:  Module: Linked to module rlm_preprocess
 Debug:  Module: Instantiating module "preprocess" from file /opt/local/etc/raddb/modules/preprocess
 Debug:   preprocess {
 Debug:   huntgroups = "/opt/local/etc/raddb/huntgroups"
 Debug:   hints = "/opt/local/etc/raddb/hints"
 Debug:   with_ascend_hack = no
 Debug:   ascend_channels_per_line = 23
 Debug:   with_ntdomain_hack = no
 Debug:   with_specialix_jetstream_hack = no
 Debug:   with_cisco_vsa_hack = no
 Debug:   with_alvarion_vsa_hack = no
 Debug:   }
 Debug: reading pairlist file /opt/local/etc/raddb/huntgroups
 Debug: reading pairlist file /opt/local/etc/raddb/hints
 Debug:     (Loaded rlm_realm, checking if it's valid)
 Debug:  Module: Linked to module rlm_realm
 Debug:  Module: Instantiating module "ntdomain" from file /opt/local/etc/raddb/modules/realm
 Debug:   realm ntdomain {
 Debug:   format = "prefix"
 Debug:   delimiter = "\"
 Debug:   ignore_default = no
 Debug:   ignore_null = no
 Debug:   }
 Debug:  Module: Checking preacct {...} for more modules to load
 Debug:     (Loaded rlm_acct_unique, checking if it's valid)
 Debug:  Module: Linked to module rlm_acct_unique
 Debug:  Module: Instantiating module "acct_unique" from file /opt/local/etc/raddb/modules/acct_unique
 Debug:   acct_unique {
 Debug:   key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port"
 Debug:   }
 Debug:  Module: Instantiating module "suffix" from file /opt/local/etc/raddb/modules/realm
 Debug:   realm suffix {
 Debug:   format = "suffix"
 Debug:   delimiter = "@"
 Debug:   ignore_default = no
 Debug:   ignore_null = no
 Debug:   }
 Debug:     (Loaded rlm_files, checking if it's valid)
 Debug:  Module: Linked to module rlm_files
 Debug:  Module: Instantiating module "files" from file /opt/local/etc/raddb/modules/files
 Debug:   files {
 Debug:   usersfile = "/opt/local/etc/raddb/users"
 Debug:   acctusersfile = "/opt/local/etc/raddb/acct_users"
 Debug:   preproxy_usersfile = "/opt/local/etc/raddb/preproxy_users"
 Debug:   compat = "no"
 Debug:   }
 Debug: reading pairlist file /opt/local/etc/raddb/users
 Debug: reading pairlist file /opt/local/etc/raddb/acct_users
 Debug: reading pairlist file /opt/local/etc/raddb/preproxy_users
 Debug:  Module: Checking accounting {...} for more modules to load
 Debug:     (Loaded rlm_detail, checking if it's valid)
 Debug:  Module: Linked to module rlm_detail
 Debug:  Module: Instantiating module "detail" from file /opt/local/etc/raddb/modules/detail
 Debug:   detail {
 Debug:   detailfile = "/opt/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
 Debug:   header = "%t"
 Debug:   detailperm = 384
 Debug:   dirperm = 493
 Debug:   locking = no
 Debug:   log_packet_header = no
 Debug:   }
 Debug:     (Loaded rlm_attr_filter, checking if it's valid)
 Debug:  Module: Linked to module rlm_attr_filter
 Debug:  Module: Instantiating module "attr_filter.accounting_response" from file /opt/local/etc/raddb/modules/attr_filter
 Debug:   attr_filter attr_filter.accounting_response {
 Debug:   attrsfile = "/opt/local/etc/raddb/attrs.accounting_response"
 Debug:   key = "%{User-Name}"
 Debug:   relaxed = no
 Debug:   }
 Debug: reading pairlist file /opt/local/etc/raddb/attrs.accounting_response
 Debug:  Module: Checking session {...} for more modules to load
 Debug:     (Loaded rlm_radutmp, checking if it's valid)
 Debug:  Module: Linked to module rlm_radutmp
 Debug:  Module: Instantiating module "radutmp" from file /opt/local/etc/raddb/modules/radutmp
 Debug:   radutmp {
 Debug:   filename = "/opt/local/var/log/radius/radutmp"
 Debug:   username = "%{User-Name}"
 Debug:   case_sensitive = yes
 Debug:   check_with_nas = yes
 Debug:   perm = 384
 Debug:   callerid = yes
 Debug:   }
 Debug:  Module: Checking post-proxy {...} for more modules to load
 Debug:  Module: Checking post-auth {...} for more modules to load
 Debug:  Module: Instantiating module "attr_filter.access_reject" from file /opt/local/etc/raddb/modules/attr_filter
 Debug:   attr_filter attr_filter.access_reject {
 Debug:   attrsfile = "/opt/local/etc/raddb/attrs.access_reject"
 Debug:   key = "%{User-Name}"
 Debug:   relaxed = no
 Debug:   }
 Debug: reading pairlist file /opt/local/etc/raddb/attrs.access_reject
 Debug:  } # modules
 Debug: } # server
 Debug: server inner-tunnel { # from file /opt/local/etc/raddb/sites-enabled/inner-tunnel
 Debug:  modules {
 Debug:  Module: Checking authenticate {...} for more modules to load
 Debug:     (Loaded rlm_pap, checking if it's valid)
 Debug:  Module: Linked to module rlm_pap
 Debug:  Module: Instantiating module "pap" from file /opt/local/etc/raddb/modules/pap
 Debug:   pap {
 Debug:   encryption_scheme = "auto"
 Debug:   auto_header = no
 Debug:   }
 Debug:     (Loaded rlm_unix, checking if it's valid)
 Debug:  Module: Linked to module rlm_unix
 Debug:  Module: Instantiating module "unix" from file /opt/local/etc/raddb/modules/unix
 Debug:   unix {
 Debug:   radwtmp = "/opt/local/var/log/radius/radwtmp"
 Debug:   }
 Debug:  Module: Checking authorize {...} for more modules to load
 Debug:     (Loaded rlm_ldap, checking if it's valid)
 Debug:  Module: Linked to module rlm_ldap
 Debug:  Module: Instantiating module "ldap" from file /opt/local/etc/raddb/modules/ldap
 Debug:   ldap {
 Debug:   server = "10.1.0.20"
 Debug:   port = 389
 Debug:   password = "ykFeQcvhgWpEgT4nKekgZNmCyz8e"
 Debug:   expect_password = yes
 Debug:   identity = "cn=admin,dc=sirono,dc=com"
 Debug:   net_timeout = 1
 Debug:   timeout = 4
 Debug:   timelimit = 3
 Debug:   max_uses = 0
 Debug:   tls_mode = no
 Debug:   start_tls = no
 Debug:   tls_require_cert = "allow"
 Debug:    tls {
 Debug:     start_tls = no
 Debug:     require_cert = "allow"
 Debug:    }
 Debug:   basedn = "ou=people,dc=sirono,dc=com"
 Debug:   filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})"
 Debug:   base_filter = "(objectclass=inetOrgPerson)"
 Debug:   auto_header = no
 Debug:   access_attr_used_for_allow = yes
 Debug:   groupname_attribute = "cn"
 Debug:   groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
 Debug:   dictionary_mapping = "/opt/local/etc/raddb/ldap.attrmap"
 Debug:   ldap_debug = 0
 Debug:   ldap_connections_number = 5
 Debug:   compare_check_items = no
 Debug:   do_xlat = yes
 Debug:   set_auth_type = no
 Debug:    keepalive {
 Debug:     idle = 60
 Debug:     probes = 3
 Debug:     interval = 3
 Debug:    }
 Debug:   }
 Debug: rlm_ldap: Registering ldap_groupcmp for Ldap-Group
 Debug: rlm_ldap: Registering ldap_xlat with xlat_name ldap
 Debug: rlm_ldap: reading ldap<->radius mappings from file /opt/local/etc/raddb/ldap.attrmap
 Debug: rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
 Debug: rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
 Debug: rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
 Debug: rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
 Debug: rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
 Debug: rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
 Debug: rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
 Debug: rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
 Debug: rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
 Debug: rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
 Debug: rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
 Debug: rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header
 Debug: rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
 Debug: rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
 Debug: rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
 Debug: rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
 Debug: rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
 Debug: rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
 Debug: rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
 Debug: rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
 Debug: rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
 Debug: rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
 Debug: rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
 Debug: rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
 Debug: rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
 Debug: rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
 Debug: rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
 Debug: rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
 Debug: rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
 Debug: rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
 Debug: rlm_ldap: LDAP radiusClass mapped to RADIUS Class
 Debug: rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
 Debug: rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
 Debug: rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
 Debug: rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
 Debug: rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
 Debug: rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
 Debug: rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
 Debug: rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network
 Debug: rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
 Debug: rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
 Debug: rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
 Debug: rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
 Debug: rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
 Debug: rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type
 Debug: rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id
 Debug: conns: 0x7fe01ac55ea0
 Debug:  Module: Checking session {...} for more modules to load
 Debug:  Module: Checking post-proxy {...} for more modules to load
 Debug:  Module: Checking post-auth {...} for more modules to load
 Debug:  } # modules
 Debug: } # server
 Debug: radiusd: #### Opening IP addresses and Ports ####
 Debug: listen {
 Debug:   type = "auth"
 Debug:   ipaddr = *
 Debug:   port = 0
 Debug: }
 Debug: listen {
 Debug:   type = "acct"
 Debug:   ipaddr = *
 Debug:   port = 0
 Debug: }
 Debug: listen {
 Debug:   type = "control"
 Debug:  listen {
 Debug:   socket = "/opt/local/var/run/radiusd/radiusd.sock"
 Debug:  }
 Debug: }
 Debug: listen {
 Debug:   type = "auth"
 Debug:   ipaddr = 127.0.0.1
 Debug:   port = 18120
 Debug: }