root@freeradius:/etc/freeradius/3.0# freeradius -X FreeRADIUS Version 3.0.16 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/accounting including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.000.000.20/32 { ipaddr = 192.000.000.20 ipv4addr = 192.000.000.20 require_message_authenticator = no secret = <<< secret >>> shortname = "HPWireless" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client DEVFreeRadius { ipaddr = 192.000.000.252 ipv4addr = 192.000.000.252 require_message_authenticator = no secret = <<< secret >>> shortname = "DEVFreeRadius" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client ldap___static { ipaddr = 10.000.000.81 ipv4addr = 10.000.000.81 require_message_authenticator = no secret = <<< secret >>> shortname = "LDAPTest" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loading module "linelog_recv_request" from file /etc/freeradius/3.0/mods-enabled/linelog linelog linelog_recv_request { filename = "syslog" escape_filenames = no syslog_facility = "local0" syslog_severity = "debug" permissions = 384 format = "action = Recv-Request, %{pairs:request:}" } # Loading module "linelog_send_accept" from file /etc/freeradius/3.0/mods-enabled/linelog linelog linelog_send_accept { filename = "syslog" escape_filenames = no syslog_facility = "local0" syslog_severity = "debug" permissions = 384 format = "action = Send-Accept, %{pairs:request:}" } # Loading module "linelog_send_reject" from file /etc/freeradius/3.0/mods-enabled/linelog linelog linelog_send_reject { filename = "syslog" escape_filenames = no syslog_facility = "local0" syslog_severity = "debug" permissions = 384 format = "action = Send-Reject, %{pairs:request:}" } # Loading module "linelog_send_proxy_request" from file /etc/freeradius/3.0/mods-enabled/linelog linelog linelog_send_proxy_request { filename = "syslog" escape_filenames = no syslog_facility = "local0" syslog_severity = "debug" permissions = 384 format = "action = Send-Proxy-Request, %{pairs:proxy-request:}" } # Loading module "linelog_recv_proxy_response" from file /etc/freeradius/3.0/mods-enabled/linelog linelog linelog_recv_proxy_response { filename = "syslog" escape_filenames = no syslog_facility = "local0" syslog_severity = "debug" permissions = 384 reference = "messages.%{proxy-reply:Response-Packet-Type}" } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "ldaps://ldap.google.com:636" identity = "" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=,dc=" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { certificate_file = "/etc/freeradius/3.0/certs/ldap-client.pem" private_key_file = "/etc/freeradius/3.0/certs/ldap-client.pem" start_tls = no require_cert = "allow" } } Creating attribute LDAP-Group # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } instantiate { } # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/server.key" certificate_file = "/etc/freeradius/3.0/certs/server.pem" ca_file = "/etc/freeradius/3.0/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = yes lifetime = 48 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "linelog_recv_request" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "linelog_send_accept" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "linelog_send_reject" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "linelog_send_proxy_request" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "linelog_recv_proxy_response" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20445 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } rlm_ldap (ldap): Couldn't find configuration for post-auth, will return NOOP for calls from this section rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:332 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 55701 Listening on proxy address :: port 34070 Ready to process requests (0) Received Access-Request Id 192 from 192.000.000.20:41064 to 192.000.000.111:1812 length 320 (0) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-83-00-0B-70-AA" (0) Acct-Session-Id = "1aa86de4-00004313" (0) NAS-Port = 13523 (0) NAS-Port-Type = Wireless-802.11 (0) NAS-Identifier = "SSO Wireless" (0) NAS-IP-Address = 192.000.000.100 (0) Framed-MTU = 1496 (0) User-Name = "" (0) Calling-Station-Id = "24-F6-77-12-29-F8" (0) Called-Station-Id = "D8-9D-67-4E-87-C6" (0) Service-Type = Framed-User (0) EAP-Message = 0x0252000b016e74726f6e65 (0) Colubris-AVPair = "ssid=Weefee" (0) Colubris-AVPair = "incoming-vlan-id=10" (0) Colubris-AVPair = "group=" (0) Colubris-AVPair = "phytype=IEEE802dot11n" (0) Attr-26.8744.250 = 0x00000001 (0) Attr-26.8744.249 = 0x0a0b6f51 (0) Message-Authenticator = 0x9495db1b75f6622c129eccb6fba84a09 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 82 length 11 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 83 length 22 (0) eap: EAP session adding &reply:State = 0x5be9f6fb5bbaf2fa (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 192 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0 (0) EAP-Message = 0x01530016041055086952d0af14e55368626089d0a7e7 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x5be9f6fb5bbaf2fab461784981381d93 (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 192 with timestamp +71 Ready to process requests (1) Received Access-Request Id 67 from 192.000.000.20:41064 to 192.000.000.111:1812 length 320 (1) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77" (1) Acct-Session-Id = "60090550-00004314" (1) NAS-Port = 13524 (1) NAS-Port-Type = Wireless-802.11 (1) NAS-Identifier = "SSO Wireless" (1) NAS-IP-Address = 192.000.000.100 (1) Framed-MTU = 1496 (1) User-Name = "" (1) Calling-Station-Id = "24-F6-77-12-29-F8" (1) Called-Station-Id = "D8-9D-67-4E-87-C6" (1) Service-Type = Framed-User (1) EAP-Message = 0x0255000b016e74726f6e65 (1) Colubris-AVPair = "ssid=Weefee" (1) Colubris-AVPair = "incoming-vlan-id=10" (1) Colubris-AVPair = "group=" (1) Colubris-AVPair = "phytype=IEEE802dot11n" (1) Attr-26.8744.250 = 0x00000001 (1) Attr-26.8744.249 = 0x0a0b6f51 (1) Message-Authenticator = 0x212003684e2a58d1f7cbc0dd276aea47 (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 85 length 11 (1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Peer sent packet with method EAP Identity (1) (1) eap: Calling submodule eap_md5 to process data (1) eap_md5: Issuing MD5 Challenge (1) eap: Sending EAP Request (code 1) ID 86 length 22 (1) eap: EAP session adding &reply:State = 0xb4480576b41e01d8 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 67 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0 (1) EAP-Message = 0x0156001604106f7b0b3d8b5e9e86323e452f477c1014 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xb4480576b41e01d80cc3e0539387be27 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 177 from 192.000.000.20:41064 to 192.000.000.111:1812 length 335 (2) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77" (2) Acct-Session-Id = "60090550-00004314" (2) NAS-Port = 13524 (2) NAS-Port-Type = Wireless-802.11 (2) NAS-Identifier = "SSO Wireless" (2) NAS-IP-Address = 192.000.000.100 (2) Framed-MTU = 1496 (2) User-Name = "" (2) Calling-Station-Id = "24-F6-77-12-29-F8" (2) Called-Station-Id = "D8-9D-67-4E-87-C6" (2) Service-Type = Framed-User (2) EAP-Message = 0x025600080319152b (2) State = 0xb4480576b41e01d80cc3e0539387be27 (2) Colubris-AVPair = "ssid=Weefee" (2) Colubris-AVPair = "incoming-vlan-id=10" (2) Colubris-AVPair = "group=" (2) Colubris-AVPair = "phytype=IEEE802dot11n" (2) Attr-26.8744.250 = 0x00000001 (2) Attr-26.8744.249 = 0x0a0b6f51 (2) Message-Authenticator = 0xf34b4b3325ce0d84aa426102cabb6ac2 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 86 length 8 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) [files] = noop rlm_ldap (ldap): Closing connection (0): Hit idle_timeout, was idle for 83 seconds rlm_ldap (ldap): Closing connection (1): Hit idle_timeout, was idle for 83 seconds rlm_ldap (ldap): Closing connection (2): Hit idle_timeout, was idle for 82 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (3): Hit idle_timeout, was idle for 82 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (4): Hit idle_timeout, was idle for 81 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (5), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (5) (2) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (2) ldap: --> (uid=) (2) ldap: Performing search in "dc=,dc=" with filter "(uid=)", scope "sub" (2) ldap: Waiting for search result... (2) ldap: User object found at DN "uid=,ou=IT,ou=Users,dc=,dc=" (2) ldap: Processing user attributes (2) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (2) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (5) Need 2 more connections to reach min connections (3) rlm_ldap (ldap): Opening additional connection (6), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (2) [ldap] = ok (2) if ((ok || updated) && User-Password) { (2) if ((ok || updated) && User-Password) -> FALSE (2) [expiration] = noop (2) [logintime] = noop (2) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (2) pap: WARNING: Authentication will fail unless a "known good" password is available (2) [pap] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa (2) eap: Finished EAP session with state 0xb4480576b41e01d8 (2) eap: Previous EAP request found for state 0xb4480576b41e01d8, released from the list (2) eap: Peer sent packet with method EAP NAK (3) (2) eap: Found mutually acceptable type PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Initiating new EAP-TLS session (2) eap_peap: [eaptls start] = request (2) eap: Sending EAP Request (code 1) ID 87 length 6 (2) eap: EAP session adding &reply:State = 0xb4480576b51f1cd8 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 177 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0 (2) EAP-Message = 0x015700061920 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xb4480576b51f1cd80cc3e0539387be27 (2) Finished request Waking up in 3.6 seconds. (3) Received Access-Request Id 169 from 192.000.000.20:41064 to 192.000.000.111:1812 length 488 (3) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77" (3) Acct-Session-Id = "60090550-00004314" (3) NAS-Port = 13524 (3) NAS-Port-Type = Wireless-802.11 (3) NAS-Identifier = "SSO Wireless" (3) NAS-IP-Address = 192.000.000.100 (3) Framed-MTU = 1496 (3) User-Name = "" (3) Calling-Station-Id = "24-F6-77-12-29-F8" (3) Called-Station-Id = "D8-9D-67-4E-87-C6" (3) Service-Type = Framed-User (3) EAP-Message = 0x025700a119800000009716030100920100008e03035c82a98fd5e0d9efce87f211f2781942e54aaf28f51f9c27ff16aaccdca2135c00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00 (3) State = 0xb4480576b51f1cd80cc3e0539387be27 (3) Colubris-AVPair = "ssid=Weefee" (3) Colubris-AVPair = "incoming-vlan-id=10" (3) Colubris-AVPair = "group=" (3) Colubris-AVPair = "phytype=IEEE802dot11n" (3) Attr-26.8744.250 = 0x00000001 (3) Attr-26.8744.249 = 0x0a0b6f51 (3) Message-Authenticator = 0x617d7260ab7b8aba977374210491ff2b (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 87 length 161 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa (3) eap: Finished EAP session with state 0xb4480576b51f1cd8 (3) eap: Previous EAP request found for state 0xb4480576b51f1cd8, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer indicated complete TLS record size will be 151 bytes (3) eap_peap: Got complete TLS record (151 bytes) (3) eap_peap: [eaptls verify] = length included (3) eap_peap: (other): before SSL initialization (3) eap_peap: TLS_accept: before SSL initialization (3) eap_peap: TLS_accept: before SSL initialization (3) eap_peap: <<< recv TLS 1.2 [length 0092] (3) eap_peap: TLS_accept: SSLv3/TLS read client hello (3) eap_peap: >>> send TLS 1.2 [length 003d] (3) eap_peap: TLS_accept: SSLv3/TLS write server hello (3) eap_peap: >>> send TLS 1.2 [length 0836] (3) eap_peap: TLS_accept: SSLv3/TLS write certificate (3) eap_peap: >>> send TLS 1.2 [length 014d] (3) eap_peap: TLS_accept: SSLv3/TLS write key exchange (3) eap_peap: >>> send TLS 1.2 [length 0004] (3) eap_peap: TLS_accept: SSLv3/TLS write server done (3) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (3) eap_peap: In SSL Handshake Phase (3) eap_peap: In SSL Accept mode (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 88 length 1004 (3) eap: EAP session adding &reply:State = 0xb4480576b6101cd8 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 169 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0 (3) EAP-Message = 0x015803ec19c0000009d8160303003d020000390303ece57312f221e5f231376353df3675ab80765f77654d66a518b9ff67627ea87100c030000011ff01000100000b0004030001020017000016030308360b00083200082f0003a33082039f30820287a003020102020101300d06092a864886f70d0101 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xb4480576b6101cd80cc3e0539387be27 (3) Finished request Waking up in 3.6 seconds. (4) Received Access-Request Id 7 from 192.000.000.20:41064 to 192.000.000.111:1812 length 333 (4) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77" (4) Acct-Session-Id = "60090550-00004314" (4) NAS-Port = 13524 (4) NAS-Port-Type = Wireless-802.11 (4) NAS-Identifier = "SSO Wireless" (4) NAS-IP-Address = 192.000.000.100 (4) Framed-MTU = 1496 (4) User-Name = "" (4) Calling-Station-Id = "24-F6-77-12-29-F8" (4) Called-Station-Id = "D8-9D-67-4E-87-C6" (4) Service-Type = Framed-User (4) EAP-Message = 0x025800061900 (4) State = 0xb4480576b6101cd80cc3e0539387be27 (4) Colubris-AVPair = "ssid=Weefee" (4) Colubris-AVPair = "incoming-vlan-id=10" (4) Colubris-AVPair = "group=" (4) Colubris-AVPair = "phytype=IEEE802dot11n" (4) Attr-26.8744.250 = 0x00000001 (4) Attr-26.8744.249 = 0x0a0b6f51 (4) Message-Authenticator = 0xbd313aac261c40de74bcd8bec5ca2f90 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 88 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa (4) eap: Finished EAP session with state 0xb4480576b6101cd8 (4) eap: Previous EAP request found for state 0xb4480576b6101cd8, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 89 length 1000 (4) eap: EAP session adding &reply:State = 0xb4480576b7111cd8 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 7 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0 (4) EAP-Message = 0x015903e81940862485855a324333242108341281d922a03f000486308204823082036aa003020102020900d69fb1aac1610490300d06092a864886f70d01010b05003074310b3009060355040613024652310f300d06035504080c065261646975733112301006035504070c09536f6d65776865726531 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xb4480576b7111cd80cc3e0539387be27 (4) Finished request Waking up in 3.6 seconds. (5) Received Access-Request Id 174 from 192.000.000.20:41064 to 192.000.000.111:1812 length 333 (5) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77" (5) Acct-Session-Id = "60090550-00004314" (5) NAS-Port = 13524 (5) NAS-Port-Type = Wireless-802.11 (5) NAS-Identifier = "SSO Wireless" (5) NAS-IP-Address = 192.000.000.100 (5) Framed-MTU = 1496 (5) User-Name = "" (5) Calling-Station-Id = "24-F6-77-12-29-F8" (5) Called-Station-Id = "D8-9D-67-4E-87-C6" (5) Service-Type = Framed-User (5) EAP-Message = 0x025900061900 (5) State = 0xb4480576b7111cd80cc3e0539387be27 (5) Colubris-AVPair = "ssid=Weefee" (5) Colubris-AVPair = "incoming-vlan-id=10" (5) Colubris-AVPair = "group=" (5) Colubris-AVPair = "phytype=IEEE802dot11n" (5) Attr-26.8744.250 = 0x00000001 (5) Attr-26.8744.249 = 0x0a0b6f51 (5) Message-Authenticator = 0x109c2ecb1b52d243795fe2fb2d9c9ca5 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 89 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa (5) eap: Finished EAP session with state 0xb4480576b7111cd8 (5) eap: Previous EAP request found for state 0xb4480576b7111cd8, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment (5) eap_peap: [eaptls verify] = request (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 90 length 538 (5) eap: EAP session adding &reply:State = 0xb4480576b0121cd8 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 174 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0 (5) EAP-Message = 0x015a021a1900bc758a293755c9377b75cd7effbab806577281491f89078215beece00682cfda8731b8869d89283ec5f2a1df48169104a277a9be7803aa8fb26a2d479c04ff8f54ab234b55803f8d272f4b013e91b32f711fd4f226eece6c01508ec36c7f11c668e0cbd3511d66e02af0bb2875da3ca275 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xb4480576b0121cd80cc3e0539387be27 (5) Finished request Waking up in 3.6 seconds. (6) Received Access-Request Id 181 from 192.000.000.20:41064 to 192.000.000.111:1812 length 463 (6) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77" (6) Acct-Session-Id = "60090550-00004314" (6) NAS-Port = 13524 (6) NAS-Port-Type = Wireless-802.11 (6) NAS-Identifier = "SSO Wireless" (6) NAS-IP-Address = 192.000.000.100 (6) Framed-MTU = 1496 (6) User-Name = "" (6) Calling-Station-Id = "24-F6-77-12-29-F8" (6) Called-Station-Id = "D8-9D-67-4E-87-C6" (6) Service-Type = Framed-User (6) EAP-Message = 0x025a008819800000007e16030300461000004241043bb9798cd40d501eddf67bb865c0a485cc4e0abe0001bca516815ff212260844a764f6756490f573069d36aa9d318b447e565e7ecf7b4edfe4ecbcaab6bcd42a140303000101160303002897750e66478c41ff34904db6c3fe3051741bccdfa99407 (6) State = 0xb4480576b0121cd80cc3e0539387be27 (6) Colubris-AVPair = "ssid=Weefee" (6) Colubris-AVPair = "incoming-vlan-id=10" (6) Colubris-AVPair = "group=" (6) Colubris-AVPair = "phytype=IEEE802dot11n" (6) Attr-26.8744.250 = 0x00000001 (6) Attr-26.8744.249 = 0x0a0b6f51 (6) Message-Authenticator = 0xd1fbdc3253b6f7d37d32bafac968d24f (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 90 length 136 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa (6) eap: Finished EAP session with state 0xb4480576b0121cd8 (6) eap: Previous EAP request found for state 0xb4480576b0121cd8, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer indicated complete TLS record size will be 126 bytes (6) eap_peap: Got complete TLS record (126 bytes) (6) eap_peap: [eaptls verify] = length included (6) eap_peap: TLS_accept: SSLv3/TLS write server done (6) eap_peap: <<< recv TLS 1.2 [length 0046] (6) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (6) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (6) eap_peap: <<< recv TLS 1.2 [length 0010] (6) eap_peap: TLS_accept: SSLv3/TLS read finished (6) eap_peap: >>> send TLS 1.2 [length 0001] (6) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (6) eap_peap: >>> send TLS 1.2 [length 0010] (6) eap_peap: TLS_accept: SSLv3/TLS write finished (6) eap_peap: (other): SSL negotiation finished successfully (6) eap_peap: SSL Connection Established (6) eap_peap: [eaptls process] = handled (6) eap: Sending EAP Request (code 1) ID 91 length 57 (6) eap: EAP session adding &reply:State = 0xb4480576b1131cd8 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 181 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0 (6) EAP-Message = 0x015b003919001403030001011603030028a7de33d9302de8fc0e2ec59ec4ec6b3a49ef972d3f79b8ba4f5390010058036131dc22b2c68ad319 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xb4480576b1131cd80cc3e0539387be27 (6) Finished request Waking up in 3.6 seconds. (7) Received Access-Request Id 210 from 192.000.000.20:41064 to 192.000.000.111:1812 length 333 (7) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77" (7) Acct-Session-Id = "60090550-00004314" (7) NAS-Port = 13524 (7) NAS-Port-Type = Wireless-802.11 (7) NAS-Identifier = "SSO Wireless" (7) NAS-IP-Address = 192.000.000.100 (7) Framed-MTU = 1496 (7) User-Name = "" (7) Calling-Station-Id = "24-F6-77-12-29-F8" (7) Called-Station-Id = "D8-9D-67-4E-87-C6" (7) Service-Type = Framed-User (7) EAP-Message = 0x025b00061900 (7) State = 0xb4480576b1131cd80cc3e0539387be27 (7) Colubris-AVPair = "ssid=Weefee" (7) Colubris-AVPair = "incoming-vlan-id=10" (7) Colubris-AVPair = "group=" (7) Colubris-AVPair = "phytype=IEEE802dot11n" (7) Attr-26.8744.250 = 0x00000001 (7) Attr-26.8744.249 = 0x0a0b6f51 (7) Message-Authenticator = 0x363f4e9c9ee5c035f4c5cf132614971f (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 91 length 6 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa (7) eap: Finished EAP session with state 0xb4480576b1131cd8 (7) eap: Previous EAP request found for state 0xb4480576b1131cd8, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: Peer ACKed our handshake fragment. handshake is finished (7) eap_peap: [eaptls verify] = success (7) eap_peap: [eaptls process] = success (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state TUNNEL ESTABLISHED (7) eap: Sending EAP Request (code 1) ID 92 length 40 (7) eap: EAP session adding &reply:State = 0xb4480576b2141cd8 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) Sent Access-Challenge Id 210 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0 (7) EAP-Message = 0x015c00281900170303001da7de33d9302de8fd86b1f383c9b21bfd26d311ebc4d1c860876f3a058b (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xb4480576b2141cd80cc3e0539387be27 (7) Finished request Waking up in 3.6 seconds. (8) Received Access-Request Id 48 from 192.000.000.20:41064 to 192.000.000.111:1812 length 369 (8) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77" (8) Acct-Session-Id = "60090550-00004314" (8) NAS-Port = 13524 (8) NAS-Port-Type = Wireless-802.11 (8) NAS-Identifier = "SSO Wireless" (8) NAS-IP-Address = 192.000.000.100 (8) Framed-MTU = 1496 (8) User-Name = "" (8) Calling-Station-Id = "24-F6-77-12-29-F8" (8) Called-Station-Id = "D8-9D-67-4E-87-C6" (8) Service-Type = Framed-User (8) EAP-Message = 0x025c002a1900170303001f97750e66478c4200ae32484d3aa2490fee167338c47b57e108a3238acac426 (8) State = 0xb4480576b2141cd80cc3e0539387be27 (8) Colubris-AVPair = "ssid=Weefee" (8) Colubris-AVPair = "incoming-vlan-id=10" (8) Colubris-AVPair = "group=" (8) Colubris-AVPair = "phytype=IEEE802dot11n" (8) Attr-26.8744.250 = 0x00000001 (8) Attr-26.8744.249 = 0x0a0b6f51 (8) Message-Authenticator = 0xc2090a7de76087ab62a11ea135cffbc4 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 92 length 42 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa (8) eap: Finished EAP session with state 0xb4480576b2141cd8 (8) eap: Previous EAP request found for state 0xb4480576b2141cd8, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state WAITING FOR INNER IDENTITY (8) eap_peap: Identity - (8) eap_peap: Got inner identity '' (8) eap_peap: Setting default EAP type for tunneled EAP session (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x025c000b016e74726f6e65 (8) eap_peap: Setting User-Name to (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x025c000b016e74726f6e65 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "" (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x025c000b016e74726f6e65 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "" (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 92 length 11 (8) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Peer sent packet with method EAP Identity (1) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap_mschapv2: Issuing Challenge (8) eap: Sending EAP Request (code 1) ID 93 length 43 (8) eap: EAP session adding &reply:State = 0x2f5237742f0f2ddd (8) [eap] = handled (8) } # authenticate = handled (8) } # server inner-tunnel (8) Virtual server sending reply (8) EAP-Message = 0x015d002b1a015d00261047c029917ade84279c1cd6fbc28e7c43667265657261646975732d332e302e3136 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x2f5237742f0f2ddd92ea258de54332ca (8) eap_peap: Got tunneled reply code 11 (8) eap_peap: EAP-Message = 0x015d002b1a015d00261047c029917ade84279c1cd6fbc28e7c43667265657261646975732d332e302e3136 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: State = 0x2f5237742f0f2ddd92ea258de54332ca (8) eap_peap: Got tunneled reply RADIUS code 11 (8) eap_peap: EAP-Message = 0x015d002b1a015d00261047c029917ade84279c1cd6fbc28e7c43667265657261646975732d332e302e3136 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: State = 0x2f5237742f0f2ddd92ea258de54332ca (8) eap_peap: Got tunneled Access-Challenge (8) eap: Sending EAP Request (code 1) ID 93 length 74 (8) eap: EAP session adding &reply:State = 0xb4480576b3151cd8 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) Sent Access-Challenge Id 48 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0 (8) EAP-Message = 0x015d004a1900170303003fa7de33d9302de8feb01359c02940d66ce006fce78b883b1b7f71047bd1aa6dcecb8820c7c29f116b714f32bc3acc4415d5bb17545954f80f7744adad58474d (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0xb4480576b3151cd80cc3e0539387be27 (8) Finished request Waking up in 3.5 seconds. (9) Received Access-Request Id 215 from 192.000.000.20:41064 to 192.000.000.111:1812 length 423 (9) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77" (9) Acct-Session-Id = "60090550-00004314" (9) NAS-Port = 13524 (9) NAS-Port-Type = Wireless-802.11 (9) NAS-Identifier = "SSO Wireless" (9) NAS-IP-Address = 192.000.000.100 (9) Framed-MTU = 1496 (9) User-Name = "" (9) Calling-Station-Id = "24-F6-77-12-29-F8" (9) Called-Station-Id = "D8-9D-67-4E-87-C6" (9) Service-Type = Framed-User (9) EAP-Message = 0x025d00601900170303005597750e66478c4201113e9cfbe1dd8f763122f652ccaadbe33305d7271586b173a274a167e0e69a7541b82f6c79c65b1ca2482275f3f17804bcdff6944d46f986199db62d994a1fbc62feb53dfd62aaf4843cab087b (9) State = 0xb4480576b3151cd80cc3e0539387be27 (9) Colubris-AVPair = "ssid=Weefee" (9) Colubris-AVPair = "incoming-vlan-id=10" (9) Colubris-AVPair = "group=" (9) Colubris-AVPair = "phytype=IEEE802dot11n" (9) Attr-26.8744.250 = 0x00000001 (9) Attr-26.8744.249 = 0x0a0b6f51 (9) Message-Authenticator = 0xadc59061e12fda83a2b8eacf982998cc (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /@\./) { (9) if (&User-Name =~ /@\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 93 length 96 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa (9) eap: Finished EAP session with state 0xb4480576b3151cd8 (9) eap: Previous EAP request found for state 0xb4480576b3151cd8, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state phase2 (9) eap_peap: EAP method MSCHAPv2 (26) (9) eap_peap: Got tunneled request (9) eap_peap: EAP-Message = 0x025d00411a025d003c31a4abffc9b6efa4452f25ee14688ef3450000000000000000fcd20fa844cb8b64bb8450cfa108022fb5fc7ae61c9f5ec8006e74726f6e65 (9) eap_peap: Setting User-Name to (9) eap_peap: Sending tunneled request to inner-tunnel (9) eap_peap: EAP-Message = 0x025d00411a025d003c31a4abffc9b6efa4452f25ee14688ef3450000000000000000fcd20fa844cb8b64bb8450cfa108022fb5fc7ae61c9f5ec8006e74726f6e65 (9) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (9) eap_peap: User-Name = "" (9) eap_peap: State = 0x2f5237742f0f2ddd92ea258de54332ca (9) Virtual server inner-tunnel received request (9) EAP-Message = 0x025d00411a025d003c31a4abffc9b6efa4452f25ee14688ef3450000000000000000fcd20fa844cb8b64bb8450cfa108022fb5fc7ae61c9f5ec8006e74726f6e65 (9) FreeRADIUS-Proxied-To = 127.0.0.1 (9) User-Name = "" (9) State = 0x2f5237742f0f2ddd92ea258de54332ca (9) WARNING: Outer and inner identities are the same. User privacy is compromised. (9) server inner-tunnel { (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /@\./) { (9) if (&User-Name =~ /@\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [chap] = noop (9) [mschap] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) update control { (9) &Proxy-To-Realm := LOCAL (9) } # update control = noop (9) eap: Peer sent EAP Response (code 2) ID 93 length 65 (9) eap: No EAP Start, assuming it's an on-going EAP conversation (9) [eap] = updated (9) [files] = noop rlm_ldap (ldap): Reserved connection (5) (9) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (9) ldap: --> (uid=) (9) ldap: Performing search in "dc=,dc=" with filter "(uid=)", scope "sub" (9) ldap: Waiting for search result... (9) ldap: User object found at DN "uid=,ou=IT,ou=Users,dc=,dc=" (9) ldap: Processing user attributes (9) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (9) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (5) Need 1 more connections to reach min connections (3) rlm_ldap (ldap): Opening additional connection (7), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (9) [ldap] = ok (9) [expiration] = noop (9) [logintime] = noop (9) [pap] = noop (9) } # authorize = updated (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (9) authenticate { (9) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa (9) eap: Finished EAP session with state 0x2f5237742f0f2ddd (9) eap: Previous EAP request found for state 0x2f5237742f0f2ddd, released from the list (9) eap: Peer sent packet with method EAP MSCHAPv2 (26) (9) eap: Calling submodule eap_mschapv2 to process data (9) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (9) eap_mschapv2: authenticate { (9) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (9) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (9) mschap: Creating challenge hash with username: (9) mschap: Client is using MS-CHAPv2 (9) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (9) mschap: ERROR: MS-CHAP2-Response is incorrect (9) [mschap] = reject (9) } # authenticate = reject (9) eap: Sending EAP Failure (code 4) ID 93 length 4 (9) eap: Freeing handler (9) [eap] = reject (9) } # authenticate = reject (9) Failed to authenticate the user (9) Using Post-Auth-Type Reject (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (9) Post-Auth-Type REJECT { (9) attr_filter.access_reject: EXPAND %{User-Name} (9) attr_filter.access_reject: --> (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 (9) [attr_filter.access_reject] = updated (9) update outer.session-state { (9) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: FAILED: No NT/LM-Password. Cannot perform authentication' (9) } # update outer.session-state = noop (9) } # Post-Auth-Type REJECT = updated (9) } # server inner-tunnel (9) Virtual server sending reply (9) MS-CHAP-Error = "]E=691 R=1 C=99f5970e0fc8f1f325433c9f995d2763 V=3 M=Authentication rejected" (9) EAP-Message = 0x045d0004 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) eap_peap: Got tunneled reply code 3 (9) eap_peap: MS-CHAP-Error = "]E=691 R=1 C=99f5970e0fc8f1f325433c9f995d2763 V=3 M=Authentication rejected" (9) eap_peap: EAP-Message = 0x045d0004 (9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (9) eap_peap: Got tunneled reply RADIUS code 3 (9) eap_peap: MS-CHAP-Error = "]E=691 R=1 C=99f5970e0fc8f1f325433c9f995d2763 V=3 M=Authentication rejected" (9) eap_peap: EAP-Message = 0x045d0004 (9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (9) eap_peap: Tunneled authentication was rejected (9) eap_peap: FAILURE (9) eap: Sending EAP Request (code 1) ID 94 length 46 (9) eap: EAP session adding &reply:State = 0xb4480576bc161cd8 (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) Challenge { ... } # empty sub-section is ignored (9) session-state: Saving cached attributes (9) Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" (9) Sent Access-Challenge Id 215 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0 (9) EAP-Message = 0x015e002e19001703030023a7de33d9302de8ffc42b0e26a9c87b36ad400d427f31d4a2ea01b4fb265802637898b5 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0xb4480576bc161cd80cc3e0539387be27 (9) Finished request Waking up in 3.0 seconds. (10) Received Access-Request Id 232 from 192.000.000.20:41064 to 192.000.000.111:1812 length 373 (10) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77" (10) Acct-Session-Id = "60090550-00004314" (10) NAS-Port = 13524 (10) NAS-Port-Type = Wireless-802.11 (10) NAS-Identifier = "SSO Wireless" (10) NAS-IP-Address = 192.000.000.100 (10) Framed-MTU = 1496 (10) User-Name = "" (10) Calling-Station-Id = "24-F6-77-12-29-F8" (10) Called-Station-Id = "D8-9D-67-4E-87-C6" (10) Service-Type = Framed-User (10) EAP-Message = 0x025e002e1900170303002397750e66478c4202133152404312227f5383b97f966c492ad52f54f56198ef97d3e141 (10) State = 0xb4480576bc161cd80cc3e0539387be27 (10) Colubris-AVPair = "ssid=Weefee" (10) Colubris-AVPair = "incoming-vlan-id=10" (10) Colubris-AVPair = "group=" (10) Colubris-AVPair = "phytype=IEEE802dot11n" (10) Attr-26.8744.250 = 0x00000001 (10) Attr-26.8744.249 = 0x0a0b6f51 (10) Message-Authenticator = 0xf09c4fb0e08d1697ed6cb799dfe9b5d9 (10) Restoring &session-state (10) &session-state:Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" (10) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /@\./) { (10) if (&User-Name =~ /@\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 94 length 46 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (10) authenticate { (10) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa (10) eap: Finished EAP session with state 0xb4480576bc161cd8 (10) eap: Previous EAP request found for state 0xb4480576bc161cd8, released from the list (10) eap: Peer sent packet with method EAP PEAP (25) (10) eap: Calling submodule eap_peap to process data (10) eap_peap: Continuing EAP-TLS (10) eap_peap: [eaptls verify] = ok (10) eap_peap: Done initial handshake (10) eap_peap: [eaptls process] = ok (10) eap_peap: Session established. Decoding tunneled attributes (10) eap_peap: PEAP state send tlv failure (10) eap_peap: Received EAP-TLV response (10) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (10) eap_peap: This means you need to read the PREVIOUS messages in the debug output (10) eap_peap: to find out the reason why the user was rejected (10) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (10) eap_peap: what went wrong, and how to fix the problem (10) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (10) eap: Sending EAP Failure (code 4) ID 94 length 4 (10) eap: Failed in EAP select (10) [eap] = invalid (10) } # authenticate = invalid (10) Failed to authenticate the user (10) Using Post-Auth-Type Reject (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (10) Post-Auth-Type REJECT { (10) attr_filter.access_reject: EXPAND %{User-Name} (10) attr_filter.access_reject: --> (10) attr_filter.access_reject: Matched entry DEFAULT at line 11 (10) [attr_filter.access_reject] = updated (10) [eap] = noop (10) policy remove_reply_message_if_eap { (10) if (&reply:EAP-Message && &reply:Reply-Message) { (10) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (10) else { (10) [noop] = noop (10) } # else = noop (10) } # policy remove_reply_message_if_eap = noop (10) } # Post-Auth-Type REJECT = updated (10) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (10) Sending delayed response (10) Sent Access-Reject Id 232 from 192.000.000.111:1812 to 192.000.000.20:41064 length 44 (10) EAP-Message = 0x045e0004 (10) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 1.9 seconds. (1) Cleaning up request packet ID 67 with timestamp +81 Waking up in 1.3 seconds. (2) Cleaning up request packet ID 177 with timestamp +81 (3) Cleaning up request packet ID 169 with timestamp +83 (4) Cleaning up request packet ID 7 with timestamp +83 (5) Cleaning up request packet ID 174 with timestamp +83 (6) Cleaning up request packet ID 181 with timestamp +83 (7) Cleaning up request packet ID 210 with timestamp +83 (8) Cleaning up request packet ID 48 with timestamp +83 Waking up in 0.5 seconds. (9) Cleaning up request packet ID 215 with timestamp +83 (10) Cleaning up request packet ID 232 with timestamp +83 Ready to process requests