Adding VLAN ID Attribute

[sumi thra]

 Hi
  Im getting a message from the free radius-server as below.............
 ----------------------------------------------------------------------------------------
  Sending Access-Accept of id 194 to 192.168.0.1:10085<http://192.168.0.1:10085>

Tunnel-Type:0 = VLAN

Tunnel-Medium-Type:0 = IEEE-802

Tunnel-Private-Group-Id:0 = "3"

Reply-Message = "Hello, sumi"

MS-MPPE-Recv-Key = 
0x07544c7a731fcb591250e317cbcc2a41703e88a69321d95f4c905655cfff8881

MS-MPPE-Send-Key = 
0x3f816b9b61eedab1e3d11dd6bfcd9f59642099a14123a04d689aa1a490798ef8

EAP-Message = 0x03050004

Message-Authenticator = 0x00000000000000000000000000000000

User-Name = "anonymous"
Finished request 4
 
------------------------------------------------------------------------------------------------
Could you plz tell me which module is printing this informations?? I need to 
incorporate a VLAN-ID support into the free-radius. I know that its already 
implemented in free-radius. But we have customized it.. so How can i include 
this attribute ( Tunnel-Private-Group-ID ) in the response packet ?? 
 Hope to get your earliest reply.
 Thanks & Regards
Sumithra

 On 9/5/05, sumi <sumi.rs at gmail.com> wrote: 
> 
> Hi 
>  How to add the vlan-id attribute to the Accept-Accept packet??
>  Where should i look into to see the attributes that are sent in the 
> Access-Reply packet?? 
> Thanks
> 
> -- 
> "If u look at what u dont have in life, u dont have anything
> 
> But if u look at what u have in life, u have everything.....!!"
> 
> 
> -
> List info/subscribe/unsubscribe? See 
> http://www.freeradius.org/list/devel.html
> 
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-devel/attachments/20050905/d0365e92/attachment.html>