Freeradius support RFC4590?

[kevinf]

seems a config issue ?

rad_recv: Access-Request packet from host 10.0.248.250:1071, id=0, length=65
        Digest-Method = "INVITE"
        Digest-URI = "sip:99177 at 10.0.248.250:5060"
        User-Name = "345111"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
  modcall[authorize]: module "digest" returns noop for request 0
    rlm_realm: No '@' in User-Name = "345111", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 0
    users: Matched entry 345111 at line 52
  modcall[authorize]: module "files" returns ok for request 0
rlm_pap: No clear-text password in the request.  Not performing PAP.
  modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns ok) for request 0
auth: type Local
auth: No User-Password or CHAP-Password attribute in the request
auth: Failed to validate the user.
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 10.0.248.250:1071, id=0, length=65
Sending Access-Reject of id 0 to 10.0.248.250 port 1071
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 4 seconds...
rad_recv: Access-Request packet from host 10.0.248.250:1071, id=0, length=65
Sending duplicate reply to client sbc:1071 - ID: 0
Re-sending Access-Reject of id 0 to 10.0.248.250 port 1071
--- Walking the entire request list ---
Waking up in 3 seconds...
rad_recv: Access-Request packet from host 10.0.248.250:1071, id=0, length=65
Sending duplicate reply to client sbc:1071 - ID: 0
Re-sending Access-Reject of id 0 to 10.0.248.250 port 1071>




kevinf wrote:
>> hi Alan
>>  after apply ur patch on freeradius 1.1.6 , seems still response
>> Access-reject
>> 
>> rad_recv: Access-Request packet from host 10.0248.250:1071, id=0, length=65
>>         Digest-Method = "INVITE"
>>         Digest-URI = "sip:99177 at 10.0.248.250:5060"
>>         User-Name = "345111"
>> rad_recv: Access-Request packet from host 10.0.248.250:1071, id=0, length=65
>> Sending Access-Reject of id 0 to 10.0.248.250 port 1071
>
>  How about supplying the *full* debugging as suggested in the FAQ,
>README, INSTALL, "man" page, and daily on this list?
>
>  Alan DeKok.
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/devel.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-devel/attachments/20090202/56d09e31/attachment.html>