Freeradius-Devel Digest, Vol 66, Issue 6

[Gyanendra Kumar]

Hi Neal:

Thanks for the response.
authorize {

 if ("%{NAS-Port-Type}" =~ /^Wireless/){
    if ("%{NAS-Identifier}" =~ /^gktest-nas-id/){

if ("%{Called-Station-Id}" =~ /(.*):(.*)/){

update control {
%{Called-Station-SSId} = "%{2}"

If I do anything like above try and use any new variable
for example here,
%{Called-Station-SSId}

I get this error when starting radius deamon.

Sun Oct 17 18:19:02 2010 : Error: /etc/freeradius/sites-enabled/default[71]:
Invalid expansion: "%{2}"

Look forward to your comments.

Best Regards

-Gyan

It happens both in update request and update control

On Fri, Oct 15, 2010 at 3:00 AM, <
freeradius-devel-request at lists.freeradius.org> wrote:

> Send Freeradius-Devel mailing list submissions to
>        freeradius-devel at lists.freeradius.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        http://lists.freeradius.org/mailman/listinfo/freeradius-devel
> or, via email, send a message with subject or body 'help' to
>        freeradius-devel-request at lists.freeradius.org
>
> You can reach the person managing the list at
>        freeradius-devel-owner at lists.freeradius.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Freeradius-Devel digest..."
>
>
> Today's Topics:
>
>   1. RE: Upgrading Free Radius Proxy functionality (Garber, Neal)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 14 Oct 2010 09:42:59 -0400
> From: "Garber, Neal" <Neal.Garber at iberdrolausa.com>
> Subject: RE: Upgrading Free Radius Proxy functionality
> To: "'FreeRadius developers mailing list'"
>        <freeradius-devel at lists.freeradius.org>
> Message-ID:
>        <
> 3FF48394E621F14F97A9117CF92D138E5863CDAE1D at EEROCH1CMS1.Energyeast.net>
>
> Content-Type: text/plain; charset="us-ascii"
>
> > SSID based forwarding takes precedence over realm and default forwarding.
>
> > Please give comments or pointers about how to include this functionality
> to enhance forwarding and to change order.
>
> Use unlang.  We use Cisco APs which pass the SSID in a Cisco-AVPair
> attribute.  So, perhaps you could use something similar to the following in
> the authorize section of sites-enabled/default:
>
>        # Adjust below to capture the SSID from the request
>        # If you're not sure what attr. has SSID, look at your debug output
>        # If it's not in any request attr, consult your NAS documentation on
> how to make it pass it
>        if (Cisco-AVPair =~ /ssid=(.*)/) {
>           update request {
>                SSID-Name = "%{1}"
>           }
>        }
>
>        # Adjust SSID and Realm names below
>        # Ensure you create the realms in proxy.conf
>        if (SSID-Name) {
>           if (SSID-Name == "SSID1") {
>              update control {
>                 Proxy-To-Realm = "Realm1"
>              }
>           }
>           elseif (SSID-Name == "SSID2") {
>              update control {
>                 Proxy-To-Realm = "Realm2"
>              }
>           }
>        }
>
> Also, you'll need to add SSID-Name to the dictionary file as a local
> attribute.  Something like the following:
>
> ATTRIBUTE   SSID-Name                   3012    string
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://lists.freeradius.org/pipermail/freeradius-devel/attachments/20101014/e1326b84/attachment-0001.html
> >
>
> ------------------------------
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/devel.html
>
>
> End of Freeradius-Devel Digest, Vol 66, Issue 6
> ***********************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-devel/attachments/20101017/48aa620e/attachment.html>