No Auth-Type found issue....

[Somanath Mishra]

Hi Team,
I need a little help because I am trying to configure a FreeRadius 3.0.12 +
LDAP.

With the previous FR version (2.2.5) everything work fine and I was able to
authenticate my LDAP'users.

Now I am trying to replicate my configuration but I receive this error:

Debug error:

Ready to process requests
(2) Received Access-Request Id 122 from 127.0.0.1:38214 to 127.0.0.1:1812
length 78
(2)   User-Name = "somanath"
(2)   User-Password = "password"
(2)   NAS-IP-Address = 127.0.1.1
(2)   NAS-Port = 1812
(2)   Message-Authenticator = 0xab2bb69bcb4b9d1512bdce6024e1cdef
(2) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  
-> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "somanath", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: No EAP-Message, not doing EAP
(2)     [eap] = noop
(2)     [files] = noop
(2) sql: EXPAND %{User-Name}
(2) sql:    --> somanath
(2) sql: SQL-User-Name set to 'somanath'
rlm_sql (sql): Closing connection (7): Hit idle_timeout, was idle for 64
seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql (sql): Closing connection (8): Hit idle_timeout, was idle for 64
seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql (sql): Closing connection (6): Hit idle_timeout, was idle for 64
seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql (sql): 0 of 0 connections in use.  You  may need to increase "spare"
rlm_sql (sql): Opening additional connection (9), 1 of 32 pending slots used
rlm_sql (sql): Reserved connection (9)
(2) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(2) sql:    --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'somanath' ORDER BY id
(2) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'somanath' ORDER BY id
(2) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(2) sql:    --> SELECT groupname FROM radusergroup WHERE username =
'somanath' ORDER BY priority
(2) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'somanath' ORDER BY priority
(2) sql: User not found in any groups
rlm_sql (sql): Released connection (9)
Need 2 more connections to reach min connections (3)
rlm_sql (sql): Opening additional connection (10), 1 of 31 pending slots used
(2)     [sql] = notfound
(2)     [expiration] = noop
(2)     [logintime] = noop
(2) pap: WARNING: No "known good" password found for the user.  Not
setting Auth-Type
(2) pap: WARNING: Authentication will fail unless a "known good" password
is available
(2)     [pap] = noop
(2)   } # authorize = ok
(2) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject
(2) Failed to authenticate the user
(2) Using Post-Auth-Type Reject
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   Post-Auth-Type REJECT {
(2) sql: EXPAND .query
(2) sql:    --> .query
(2) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (9)
(2) sql: EXPAND %{User-Name}
(2) sql:    --> somanath
(2) sql: SQL-User-Name set to 'somanath'
(2) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')
(2) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( 'somanath', 'password', 'Access-Reject', '2018-04-26 12:30:51')
(2) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate) VALUES ( 'somanath', 'password', 'Access-Reject', '2018-04-26
12:30:51')
(2) sql: SQL query returned: success
(2) sql: 1 record(s) updated
rlm_sql (sql): Released connection (9)
(2)     [sql] = ok
(2) attr_filter.access_reject: EXPAND %{User-Name}
(2) attr_filter.access_reject:    --> somanath
(2) attr_filter.access_reject: Matched entry DEFAULT at line 11
(2)     [attr_filter.access_reject] = updated
(2)     [eap] = noop
(2)     policy remove_reply_message_if_eap {
(2)       if (&reply:EAP-Message && &reply:Reply-Message) {
(2)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(2)       else {
(2)         [noop] = noop
(2)       } # else = noop
(2)     } # policy remove_reply_message_if_eap = noop
(2)   } # Post-Auth-Type REJECT = updated
(2) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(2) Sending delayed response
(2) Sent Access-Reject Id 122 from 127.0.0.1:1812 to 127.0.0.1:38214
length 20
Waking up in 3.9 seconds.
(2) Cleaning up request packet ID 122 with timestamp +363



What did I make mistake or miss?

Many thanks in advance for your help.