how get current TRAFFIC (ACCT) ?

[Seferovic Edvin]

Hi,

dictionary file on your freeradius server is usually found under 
/usr/share/freeradius/dictionary...

Search for 

ATTRIBUTE       Acct-Interim-Interval   85      integer

On your pppoe server ( which is using radiusclient ), look at
/etc/radiusclient/dictionary and add if not exists

ATTRIBUTE       Acct-Interim-Interval   85      integer

Then it might work.. what pppoe server are you using?

And please set up Acct-Interim-Interval to something greater then 2 minutes.
Values lower then 120 won't work.

Regards,

Edvin

-----Original Message-----
From: Andreas Sokov [mailto:andre.s at j8.com.ru] 
Sent: Donnerstag, 15. Dezember 2005 13:21
To: edvin.seferovic at kolp.at
Cc: freeradius-users at lists.freeradius.org
Subject: Re[4]: how get current TRAFFIC (ACCT) ?


 Hi.

[ You wrote Thursday, December 15, 2005, 2:52:10 PM ]
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
=-=
SE> Well you have set up your pppoe-server to send the accounting
information
SE> only at the end of the session. If connection is "lost", you will have
the
SE> accounting data in your database with AcctTerminateCause something like
SE> "terminated by server". 

SE> The session you have sent me is just an open session.

SE> As I said - you can set the Acct-Interim-Interval attribute so that your
SE> server sends the accouting packets every few minutes for example.

i try
i insert into radreply :

id      UserName        Attribute       op      Value
1       test    Framed-IP-Address       :=      192.168.96.10
4       test    Acct-Status-Type        :=      Interim-Update
5       test    Acct-Interim-Interval   :=      60
6       test    Framed-IP-Netmask       :=      255.255.252.0

but it is not worked

you wrote : add attribute into dictionary file
tell me please IN WHAT FILE I NEED ADD IT ?

and what will have to line ?
into /etc/freeradius folder i c one file ./dictionaty :

#
#       This is the master dictionary file, which references the
#       pre-defined dictionary files included with the server.
#
#       Any new/changed attributes MUST be placed in this file, as
#       the pre-defined dictionaries SHOULD NOT be edited.
#
#       $Id: dictionary.in,v 1.4 2004/04/14 15:26:20 aland Exp $
#

#
#       The filename given here should be an absolute path.
#
$INCLUDE        /usr/share/freeradius/dictionary

#
#       Place additional attributes or $INCLUDEs here.  They will
#       over-ride the definitions in the pre-defined dictionaries.
#
#       See the 'man' page for 'dictionary' for information on
#       the format of the dictionary files.

#
#       If you want to add entries to the dictionary file,
#       which are NOT going to be placed in a RADIUS packet,
#       add them here.  The numbers you pick should be between
#       3000 and 4000.
#

#ATTRIBUTE      My-Local-String         3000    string
#ATTRIBUTE      My-Local-IPAddr         3001    ipaddr
#ATTRIBUTE      My-Local-Integer        3002    integer

what i need add there ?
like this :

ATTRIBUTE      Acct-Interim-Interval    3003    integer
ATTRIBUTE      Acct-Status-Type         3004    string


??







SE> -----Original Message-----
SE> From: Andreas Sokov [mailto:andre.s at j8.com.ru] 
SE> Sent: Donnerstag, 15. Dezember 2005 12:42
SE> To: freeradius-users at lists.freeradius.org
SE> Cc: edvin.seferovic at kolp.at
SE> Subject: Re[2]: how get current TRAFFIC (ACCT) ?


SE>  Hi.

SE> [ You wrote Thursday, December 15, 2005, 2:14:10 PM ]
SE>
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
SE> =-=
SE>> Hi,

SE>> for traffic information - look at the RADACCT table in your mysql
SE> database
SE>> called radius. A simple sql query could be -

SE> -)
SE> i know what information about traffic collect in that table.
SE> But please, look at this :

SE> RadAcctId       AcctSessionId   AcctUniqueId        UserName  Realm
SE> NASIPAddress     NASPortId  NASPortType  AcctStartTime  AcctStopTime
SE> AcctSessionTime         AcctAuthentic           ConnectInfo_start
SE> ConnectInfo_stop        AcctInputOctets         AcctOutputOctets
SE> CalledStationId         CallingStationId        AcctTerminateCause
SE> ServiceType             FramedProtocol          FramedIPAddress
SE> AcctStartDelay          AcctStopDelay
SE> 19              43A154E9151B00  835535e0e65d3ace    test
SE> 213.159.102.146  0          Virtual      2005-12-15 14:35:05
0000-00-00
SE> 00:00:00     0       RADIUS                  0       0
SE> Framed-User     PPP     192.168.96.10   0       0
SE> 18              43A13CE87DBE00  73e57ea8afc72d3b    test
SE> 213.159.102.146  0          Virtual      2005-12-15 12:52:40
2005-12-15
SE> 14:10:12     4652    RADIUS                  6857793         7229167
SE> User-Request    Framed-User     PPP     192.168.96.10   0       0

SE> look at id=19 into AcctStopTime and
SE> while session OPENS! the value AcctInputOctets         AcctOutputOctets
== 0
SE> !!!

SE> and if session will be open during 20 hourse - we can not know that
current
SE> value of
SE> AcctInputOctets         AcctOutputOctets ?!

SE> What you think about it ?

SE>> SELECT SUM(AcctOutputOctets) as download, SUM(AcctInputOctets) as
upload
SE>> GROUP BY Username ORDER BY Username ASC;

SE>> This should give you a list of your users and their upload and download
SE>> traffic ( list is sorted ascending by usernames ).

SE>> Regards,

SE>> Edvin

SE>> -----Original Message-----
SE>> From: freeradius-users-bounces at lists.freeradius.org
SE>> [mailto:freeradius-users-bounces at lists.freeradius.org] On Behalf Of
SE> Andreas
SE>> Sokov
SE>> Sent: Donnerstag, 15. Dezember 2005 11:33
SE>> To: freeradius-users at lists.freeradius.org
SE>> Subject: how get current TRAFFIC (ACCT) ?
SE>> Importance: High

SE>> Hi, freeradius-users.

SE>> Linux Debian, # uname -a
SE>> Linux g48 2.6.14.3-1 #4 Sun Dec 11 05:57:57 MSK 2005 i686 GNU/Linux

SE>> #freeradius -v
SE>> freeradius: FreeRADIUS Version 1.0.5, for host , built on Oct 16 2005
at
SE>> 11:56:56

SE>> # mysql -V
SE>> mysql  Ver 14.12 Distrib 5.0.13-rc, for pc-linux-gnu (i486) using
SE> readline
SE>> 5.0

SE>> TELL ME PLEASE : HOW I CAN GET CURRENT TRAFFIC INFORMATION ?
SE>> I need to kno how much traffic user eat before it close your session.

SE>> Do Know anybody ?
SE>> I try radwho, radlast - but they show all but acct information
SE>> Try radacct - but it is not show anything info, just run and no
SE> information
SE>> ...

SE>> HELP PLEASE.


 
SE>
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
SE> =-=

SE> -- -------------------------------------
SE>  Best Regards, Andreas
SE>  Thursday, December 15, 2005 2:36:16 PM
SE>  Web-Media L.t.d.
SE>  +7 (901) 301-5811
SE>  ICQ UIN 177624

 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
=-=

-- -------------------------------------
 Best Regards, Andreas
 Thursday, December 15, 2005 2:55:28 PM
 Web-Media L.t.d.
 +7 (901) 301-5811
 ICQ UIN 177624