EAP-MD5 Authentication problem
Marco Spiga
mspiga3 at alice.it
Mon Dec 26 11:21:46 CET 2005
Hello!!!
I don't know why the 'radeapclient -s -xx 127.0.0.1 auth testing123 <req.txt' command
don't authenticate whith radiusd.
The req.txt file contains:
User-Name = "test"
User-Password = "password"
EAP-MD5-Password = "password"
NAS-IP-Address = 127.0.0.1
NAS-Port = 10
EAP-Code = Response
Called-Station-Id = "00-06-25-57-18-B6"
Calling-Station-Id = "00-06-23-27-38-E6"
EAP-Id = 210
EAP-Type-Identity = "test"
Message-Authenticator = 0x0
WITH OUTPUT:
+++> About to send encoded packet:
User-Name = "test"
User-Password = "password"
EAP-MD5-Password = "password"
NAS-IP-Address = 127.0.0.1
NAS-Port = 10
EAP-Code = Response
Called-Station-Id = "00-06-25-57-18-B6"
Calling-Station-Id = "00-06-23-27-38-E6"
EAP-Id = 210
EAP-Type-Identity = "test"
Sending Access-Request of id 39 to 127.0.0.1:1812
User-Name = "test"
User-Password = "password"
NAS-IP-Address = 127.0.0.1
NAS-Port = 10
Called-Station-Id = "00-06-25-57-18-B6"
Calling-Station-Id = "00-06-23-27-38-E6"
EAP-Message = 0x02d200090174657374
Message-Authenticator = 0x00000000000000000000000000000000
rad_recv: Access-Challenge packet from host 127.0.0.1:1812, id=39, length=80
EAP-Message = 0x01d300160410467a3e116557e810bee94bf5760a48c2
Message-Authenticator = 0xea22fa77b3f82094f1461d9300f85034
State = 0x5b89e4e2d4f4726ac10c9f4ff49f0209
<+++ EAP decoded packet:
EAP-Message = 0x01d300160410467a3e116557e810bee94bf5760a48c2
Message-Authenticator = 0xea22fa77b3f82094f1461d9300f85034
State = 0x5b89e4e2d4f4726ac10c9f4ff49f0209
EAP-Id = 211
EAP-Code = Request
EAP-Type-MD5 = 0x10467a3e116557e810bee94bf5760a48c2
+++> About to send encoded packet:
User-Name = "test"
User-Password = "\207\310\025Oi\206\303\274 !'y\021Y\373"
EAP-MD5-Password = "password"
NAS-IP-Address = 127.0.0.1
NAS-Port = 10
EAP-Code = Response
Called-Station-Id = "00-06-25-57-18-B6"
Calling-Station-Id = "00-06-23-27-38-E6"
EAP-Id = 211
Message-Authenticator = 0x00000000000000000000000000000000
EAP-Type-MD5 = 0x101eb18c0bd5ae4e5d279d43fbdb577e5c
State = 0x5b89e4e2d4f4726ac10c9f4ff49f0209
Sending Access-Request of id 40 to 127.0.0.1:1812
User-Name = "test"
User-Password = "password"
NAS-IP-Address = 127.0.0.1
NAS-Port = 10
Called-Station-Id = "00-06-25-57-18-B6"
Calling-Station-Id = "00-06-23-27-38-E6"
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x5b89e4e2d4f4726ac10c9f4ff49f0209
EAP-Message = 0x02d3001604101eb18c0bd5ae4e5d279d43fbdb577e5c
Re-sending Access-Request of id 40 to 127.0.0.1:1812
User-Name = "test"
User-Password = "s]\247\314\203\226\241\030\344\027t\223\264\271\273\002"
EAP-MD5-Password = "password"
NAS-IP-Address = 127.0.0.1
NAS-Port = 10
EAP-Code = Response
Called-Station-Id = "00-06-25-57-18-B6"
Calling-Station-Id = "00-06-23-27-38-E6"
EAP-Id = 211
Message-Authenticator = 0x00000000000000000000000000000000
EAP-Type-MD5 = 0x101eb18c0bd5ae4e5d279d43fbdb577e5c
State = 0x5b89e4e2d4f4726ac10c9f4ff49f0209
EAP-Message = 0x02d3001604101eb18c0bd5ae4e5d279d43fbdb577e5c
rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=40, length=44
EAP-Message = 0x04d30004
Message-Authenticator = 0xbbd931385ade37c4675fa301f6c7a506
<+++ EAP decoded packet:
EAP-Message = 0x04d30004
Message-Authenticator = 0xbbd931385ade37c4675fa301f6c7a506
EAP-Id = 211
EAP-Code = Failure
Total approved auths: 0
Total denied auths: 2
--------------------------------------------------------------------
--------------------------------------------------------------------
the radius.conf file contain:
modules {
...
eap {
default_eap_type = md5
md5 {
}
...
}
...
}
# eap sets the authenticate type as EAP
authorize {
...
eap
}
# eap authentication takes place.
authenticate {
eap
}
the eap.conf file contain:
eap {
default_eap_type = md5
md5 {
}
}
the users file contain:
"test" Auth-Type := EAP, User-Password == "password"
Reply-Message = "Hello, %u"
And the OUTPUT of the radiusd -XA is:
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/raddb/proxy.conf
Config: including file: /etc/raddb/clients.conf
Config: including file: /etc/raddb/snmp.conf
Config: including file: /etc/raddb/eap.conf
Config: including file: /etc/raddb/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/radius"
main: libdir = "/usr/lib"
main: radacctdir = "/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: bind_address = 127.0.0.1 IP address [127.0.0.1]
main: user = "radiusd"
main: group = "radiusd"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = yes
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: authtype = "MS-CHAP"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = yes
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file = "/etc/raddb/certs/cert-srv.pem"
tls: certificate_file = "/etc/raddb/certs/cert-srv.pem"
tls: CA_file = "/etc/raddb/certs/demoCA/cacert.pem"
tls: private_key_password = "whatever"
tls: dh_file = "/etc/raddb/certs/dh"
tls: random_file = "/etc/raddb/certs/random"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = yes
tls: check_cert_cn = "(null)"
rlm_eap: Loaded and initialized type tls
ttls: default_eap_type = "md5"
ttls: copy_request_to_tunnel = no
ttls: use_tunneled_reply = no
rlm_eap: Loaded and initialized type ttls
peap: default_eap_type = "md5"
peap: copy_request_to_tunnel = no
peap: use_tunneled_reply = no
peap: proxy_tunneled_request_as_eap = yes
rlm_eap: Loaded and initialized type peap
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/raddb/huntgroups"
preprocess: hints = "/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/etc/raddb/users"
files: acctusersfile = "/etc/raddb/acct_users"
files: preproxy_usersfile = "/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded detail
detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "/etc/shadow"
unix: group = "(null)"
unix: radwtmp = "/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded radutmp
radutmp: filename = "/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Module: Loaded SQL
sql: driver = "rlm_sql_postgresql"
sql: server = "localhost"
sql: port = ""
sql: login = "manut"
sql: password = "test"
sql: radius_db = "radiusdb"
sql: acct_table = "radacct"
sql: acct_table2 = "radacct"
sql: authcheck_table = "radcheck"
sql: authreply_table = "radreply"
sql: groupcheck_table = "radgroupcheck"
sql: groupreply_table = "radgroupreply"
sql: usergroup_table = "usergroup"
sql: nas_table = "nas"
sql: dict_table = "dictionary"
sql: sqltrace = yes
sql: sqltracefile = "/var/log/radius/sqltrace.sql"
sql: readclients = no
sql: deletestalesessions = yes
sql: num_sql_socks = 5
sql: sql_user_name = "%{User-Name}"
sql: default_user_profile = ""
sql: query_on_not_found = no
sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, Op ??FROM radcheck ??WHERE Username = '%{SQL-User-Name}' ??ORDER BY id"
sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, Op ??FROM radreply ??WHERE Username = '%{SQL-User-Name}' ??ORDER BY id"
sql: authorize_group_check_query = "SELECT radgroupcheck.id, radgroupcheck.GroupName, ??radgroupcheck.Attribute, radgroupcheck.Value,radgroupcheck.Op ??FROM radgroupcheck, usergroup ??WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName ??ORDER BY radgroupcheck.id"
sql: authorize_group_reply_query = "SELECT radgroupreply.id, radgroupreply.GroupName, radgroupreply.Attribute, ??radgroupreply.Value, radgroupreply.Op ??FROM radgroupreply,usergroup ??WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName ??ORDER BY radgroupreply.id"
sql: accounting_onoff_query = "UPDATE radacct ??SET AcctStopTime = (now() - '%{Acct-Delay-Time:-0}'::interval), ??AcctSessionTime = (EXTRACT(EPOCH FROM(now()::timestamp with time zone - AcctStartTime::timestamp with time zone - '%{Acct-Delay-Time:-0}'::interval)))::BIGINT, ??AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time:-0}' ??WHERE AcctSessionTime IS NULL AND AcctStopTime IS NULL AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= now()"
sql: accounting_update_query = "UPDATE radacct ??SET FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, ??AcctSessionTime = (EXTRACT(EPOCH FROM(now()::timestamp with time zone - AcctStartTime::timestamp with time zone - '%{Acct-Delay-Time:-0}'::interval)))::BIGINT, AcctInputOctets = (('%{Acct-Input-Gigawords:-0}'::bigint << 32) + '%{Acct-Input-Octets:-0}'::bigint), AcctOutputOctets = (('%{Acct-Output-Gigawords:-0}'::bigint << 32) + '%{Acct-Output-Octets:-0}'::bigint) ??WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' ??AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
sql: accounting_update_query_alt = "INSERT into radacct ??(AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, ??AcctSessionTime, AcctAuthentic, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ??ServiceType, FramedProtocol, FramedIPAddress) ??values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', ??'%{NAS-Port}', '%{NAS-Port-Type}', (now() - '%{Acct-Delay-Time:-0}'::interval - '%{Acct-Session-Time:-0}'::interval), ??'%{Acct-Session-Time}', '%{Acct-Authentic}', ??(('%{Acct-Input-Gigawords:-0}'::bigint << 32) + '%{Acct-Input-Octets:-0}'::bigint), ??(('%{Acct-Output-Gigawords:-0}'::bigint << 32) + '%{Acct-Output-Octets:-0}'::bigint), '%{Called-Station-Id}', ??'%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', ??NULLIF('%{Framed-IP-Address}', '')::inet)"
sql: accounting_start_query = "INSERT into radacct ??(AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctAuthentic, ??ConnectInfo_start, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) ??values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', ??'%{NAS-Port}', '%{NAS-Port-Type}', (now() - '%{Acct-Delay-Time:-0}'::interval), '%{Acct-Authentic}', '%{Connect-Info}', ??'%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', ??NULLIF('%{Framed-IP-Address}', '')::inet, '%{Acct-Delay-Time:-0}')"
sql: accounting_start_query_alt = "UPDATE radacct ??SET AcctStartTime = (now() - '%{Acct-Delay-Time:-0}'::interval), AcctStartDelay = '%{Acct-Delay-Time:-0}', ??ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' ??AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
sql: accounting_stop_query = "UPDATE radacct ??SET AcctStopTime = (now() - '%{Acct-Delay-Time:-0}'::interval), ??AcctSessionTime = NULLIF('%{Acct-Session-Time}', '')::bigint, ??AcctInputOctets = (('%{Acct-Input-Gigawords:-0}'::bigint << 32) + '%{Acct-Input-Octets:-0}'::bigint), ??AcctOutputOctets = (('%{Acct-Output-Gigawords:-0}'::bigint << 32) + '%{Acct-Output-Octets:-0}'::bigint), ??AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time:-0}', ??FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, ConnectInfo_stop = '%{Connect-Info}' ??WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' ??AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
sql: accounting_stop_query_alt = "INSERT into radacct ??(AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, ??AcctSessionTime, AcctAuthentic, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ??AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStopDelay) ??values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', ??'%{NAS-Port}', '%{NAS-Port-Type}', (now() - '%{Acct-Delay-Time:-0}'::interval - '%{Acct-Session-Time:-0}'::interval), ??(now() - '%{Acct-Delay-Time:-0}'::interval), NULLIF('%{Acct-Session-Time}', '')::bigint, ??'%{Acct-Authentic}', '%{Connect-Info}', ??(('%{Acct-Input-Gigawords:-0}'::bigint << 32) + '%{Acct-Input-Octets:-0}'::bigint), ??(('%{Acct-Output-Gigawords:-0}'::bigint << 32) + '%{Acct-Output-Octets:-0}'::bigint), '%{Called-Station-Id}', ??'%{Calling-Station-Id}', '%{Acct-Terminate-Cau!
se}', '%{Service-Type}', '%{Framed-Protocol}', ??NULLIF('%{Framed-IP-Address}', '')::inet, '%{Acct-Delay-Time:-0}')"
sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}'"
sql: connect_failure_retry_delay = 60
sql: simul_count_query = ""
sql: simul_verify_query = ""
sql: postauth_table = "radpostauth"
sql: postauth_query = "INSERT into radpostauth (username, pass, reply, authdate) ??values ('%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', NOW())"
sql: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
rlm_sql (sql): Driver rlm_sql_postgresql (module rlm_sql_postgresql) loaded and linked
rlm_sql (sql): Attempting to connect to ajugz at localhost:/radiusdb
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_postgresql #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_postgresql #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_postgresql #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_postgresql #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_postgresql #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql)
Listening on authentication 127.0.0.1:1812
Listening on accounting 127.0.0.1:1813
Listening on proxy 127.0.0.1:1814
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:32770, id=71, length=123
User-Name = "test"
User-Password = "password"
NAS-IP-Address = 127.0.0.1
NAS-Port = 10
Called-Station-Id = "00-06-25-57-18-B6"
Calling-Station-Id = "00-06-23-27-38-E6"
EAP-Message = 0x02d200090174657374
Message-Authenticator = 0x77fa8c7a2619f5223c04f644b71f3c7f
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_eap: EAP packet type response id 210 length 9
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
modcall: group authorize returns updated for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
modcall[authenticate]: module "eap" returns handled for request 0
modcall: group authenticate returns handled for request 0
Sending Access-Challenge of id 71 to 127.0.0.1:32770
EAP-Message = 0x01d30016041078ecacc0f85321e54008e837f5d52010
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa5a05865b3f3bc1d95db4dc54b8e9bac
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 127.0.0.1:32770, id=72, length=154
User-Name = "test"
User-Password = "password"
NAS-IP-Address = 127.0.0.1
NAS-Port = 10
Called-Station-Id = "00-06-25-57-18-B6"
Calling-Station-Id = "00-06-23-27-38-E6"
Message-Authenticator = 0x77d3b31a08ee633b519db4b99fbeb3e7
State = 0xa5a05865b3f3bc1d95db4dc54b8e9bac
EAP-Message = 0x02d3001604108000d71b7b64534ed94f357e6a0b26d8
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_eap: EAP packet type response id 211 length 22
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
modcall: group authorize returns updated for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: Request found, released from the list
rlm_eap: EAP/md5
rlm_eap: processing type md5
rlm_eap_md5: User-Password is required for EAP-MD5 authentication
rlm_eap: Handler failed in EAP/md5
rlm_eap: Failed in EAP select
modcall[authenticate]: module "eap" returns invalid for request 1
modcall: group authenticate returns invalid for request 1
auth: Failed to validate the user.
Delaying request 1 for 1 seconds
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 127.0.0.1:32770, id=72, length=154
Sending Access-Reject of id 72 to 127.0.0.1:32770
EAP-Message = 0x04d30004
Message-Authenticator = 0x00000000000000000000000000000000
--- Walking the entire request list ---
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 71 with timestamp 43abf06d
Cleaning up request 1 ID 72 with timestamp 43abf06d
Nothing to do. Sleeping until we see a request.
It work fine also with postgresql but I do not succeed to make this operation.
You excuse me for my bad English
Thanks
--
!!!!! Message from Marco !!!!!
More information about the Freeradius-Users
mailing list