EAP-MD5 Authentication problem

[Marco Spiga]

On Wed, Dec 28, 2005 at 12:37:00PM +0000, Anup Parkhi wrote:
> From: "Anup Parkhi" <anup_parkhi at hotmail.com>
> To: freeradius-users at lists.freeradius.org
> Date: Wed, 28 Dec 2005 12:37:00 +0000
> Subject: Re: EAP-MD5 Authentication problem
> 
> Try moving your entry fpr user way up in the users file. I had the same 
> problem. Then i moved my user after the first DEFAULT entry and it worked. 
> I think it has to do with some Checked  attribute.(Sorry, i don't have 
> access to my machine right now. i am on vacation. I can not give more  
> clear answer than this).
> 
Thank for your interesting Anup.
I have tried, but it don't work.
I attend trusting your re-enter from the vacation.

Bye

Marco
> 
> >From: Marco Spiga <mspiga3 at alice.it>
> >Reply-To: FreeRadius users mailing list 
> ><freeradius-users at lists.freeradius.org>
> >To: freeradius-users at lists.freeradius.org
> >Subject: Re: EAP-MD5 Authentication problem
> >Date: Wed, 28 Dec 2005 09:56:37 +0100
> >
> >Hello!!!
> >
> >I don't know why the 'radeapclient -s -xx 127.0.0.1 auth testing123 
> ><req.txt' command
> >don't authenticate whith radiusd.
> >The req.txt file contains:
> >
> >User-Name = "test"
> >User-Password = "password"
> >EAP-MD5-Password = "password"
> >NAS-IP-Address = 127.0.0.1
> >NAS-Port = 10
> >EAP-Code = Response
> >Called-Station-Id = "00-06-25-57-18-B6"
> >Calling-Station-Id = "00-06-23-27-38-E6"
> >EAP-Id = 210
> >EAP-Type-Identity = "test"
> >Message-Authenticator = 0x0
> >
> >--------------------------------------------------------------------
> >
> >the radius.conf file contain:
> >
> >       modules {
> >                ...
> >                eap {
> >                        default_eap_type = md5
> >                        md5 {
> >                        }
> >                    ...
> >                }
> >                ...
> >        }
> >        authorize {
> >                ...
> >                eap
> >        }
> >        authenticate {
> >                eap
> >        }
> >
> >the eap.conf file contain:
> >
> >	eap {
> >	default_eap_type = md5
> >	md5 {
> >	}
> >	}
> >
> >the users file contain:
> >
> >"test"          Auth-Type := EAP, User-Password == "password"
> >                Reply-Message = "Hello, %u"
> >
> >Where is the error ?
> >Please.
> >
> >Bye!
> >-
> >List info/subscribe/unsubscribe? See 
> >http://www.freeradius.org/list/users.html
> 
> 
> - 
> List info/subscribe/unsubscribe? See 
> http://www.freeradius.org/list/users.html
---fine del testo---

-- 
				!!!!! Messaggio da Marco !!!!!