using freradius 1.0.5 to secure an WLAN AP

[Frank Buttner]

So now it works better. After set the IP of the radius server from * to a
real IP. But now I get this error:
rad_recv: Access-Request packet from host 192.168.1.2:2068, id=0, length=157
        User-Name = "schneeball.netz-von-frank"
        NAS-IP-Address = 192.168.1.2
        Called-Station-Id = "0014bfa57781"
        Calling-Station-Id = "000e2e3ee98f"
        NAS-Identifier = "0014bfa57781"
        NAS-Port = 24
        Framed-MTU = 1400
        State = 0x67b9d350a906536416e7852c3c0a23d0
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x02090006030d
        Message-Authenticator = 0x97c747363c9fb963fe9a5ed06bc93479
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 19
  modcall[authorize]: module "preprocess" returns ok for request 19
  modcall[authorize]: module "chap" returns noop for request 19
  modcall[authorize]: module "mschap" returns noop for request 19
    rlm_realm: No '@' in User-Name = "schneeball.netz-von-frank", looking up
realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 19
  rlm_eap: EAP packet type response id 9 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 19
    users: Matched entry DEFAULT at line 152
  modcall[authorize]: module "files" returns ok for request 19
modcall: group authorize returns updated for request 19
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 19
  rlm_eap: Request found, released from the list
  rlm_eap: EAP NAK
 rlm_eap: EAP-NAK asked for EAP-Type/tls
 rlm_eap: ERROR! Our request for tls was NAK'd with a request for tls, what
is the client thinking?
  rlm_eap: Failed in EAP select
  modcall[authenticate]: module "eap" returns invalid for request 19
modcall: group authenticate returns invalid for request 19
auth: Failed to validate the user.
Delaying request 19 for 1 seconds
Finished request 19
Going to the next request 

-----Original Message-----
From: freeradius-users-bounces+frank-buettner=gmx.net at lists.freeradius.org
[mailto:freeradius-users-bounces+frank-buettner=gmx.net at lists.freeradius.org
] On Behalf Of Frank Buttner
Sent: Thursday, December 29, 2005 9:30 PM
To: 'FreeRadius users mailing list'
Subject: RE: using freradius 1.0.5 to secure an WLAN AP 

Yes I have add this value client for the clients(1.3.6.1.5.5.7.3.2) and
Server for the Server(1.3.6.1.5.5.7.3.1).