PAP ok No Chap new Installation.
Radius
radius at kingmanaz.net
Wed Jul 6 09:36:49 CEST 2005
Sorry about that. Forgot to change the subject line.
Yesterday I put our mirror drive in service after a recommendation here
with 0.9.3 and the system is running fine. I decided to try and find out
why the system would not work after an update.
So I started all over with a completely new install of the radius and
put everything in it's /opt directory
The only part the does not work is the chap authentication all other
authentication works as it should. Our wholesale provider says we are
doing PAP just fine but no chap. They had very old instructions for
Freeradius but decided to start out with a totally clean install.
This user below is in mysql database, and the system passwd/shadow files.
He will not authenticate with the mysql database when we include a realm
@domain
and chap password.
It gets the slipstream false from the database so I'm not sure why it
won't authenticate
the rest.
When I do this with the 0.9.3 that is currently running it works fine
with the realm.
I did diff on the radiusd.conf and the sql.conf files, and work at all
the settings to be as close to the old one as possible. A couple new
items in the files I did not know right off what they were for and left
them as default.
The last time we installed 0.9.3 we actually had help to config it to
running step by step email instruction but that person is not around any
longer. It was running in 45 minutes.
here is the radius -x
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /opt/freeradius/etc/raddb/proxy.conf
Config: including file: /opt/freeradius/etc/raddb/clients.conf
Config: including file: /opt/freeradius/etc/raddb/snmp.conf
Config: including file: /opt/freeradius/etc/raddb/eap.conf
Config: including file: /opt/freeradius/etc/raddb/sql.conf
main: prefix = "/opt/freeradius"
main: localstatedir = "/opt/freeradius/var"
main: logdir = "/opt/freeradius/var/log/radius"
main: libdir = "/opt/freeradius/lib"
main: radacctdir = "/opt/freeradius/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 1645
main: allow_core_dumps = no
main: log_stripped_names = yes
main: log_file = "/opt/freeradius/var/log/radius/radius.log"
main: log_auth = yes
main: log_auth_badpass = yes
main: log_auth_goodpass = yes
main: pidfile = "/opt/freeradius/var/run/radiusd/radiusd.pid"
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/opt/freeradius/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /opt/freeradius/lib
Module: Loaded exec
exec: wait = no
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: authtype = "MS-CHAP"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/opt/freeradius/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/opt/freeradius/etc/raddb/huntgroups"
preprocess: hints = "/opt/freeradius/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded attr_filter
attr_filter: attrsfile = "/opt/freeradius/etc/raddb/attrs"
rlm_attr_filter: Authorize method will be deprecated.
Module: Instantiated attr_filter (attr_filter)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = yes
realm: ignore_null = yes
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/opt/freeradius/etc/raddb/users"
files: acctusersfile = "/opt/freeradius/etc/raddb/acct_users"
files: preproxy_usersfile = "/opt/freeradius/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded SQL
sql: driver = "rlm_sql_mysql"
sql: server = "64.240.76.3"
sql: port = ""
sql: login = "root"
sql: password = "test123"
sql: radius_db = "radius"
sql: acct_table = "radacct"
sql: acct_table2 = "radacct"
sql: authcheck_table = "radcheck"
sql: authreply_table = "radreply"
sql: groupcheck_table = "radgroupcheck"
sql: groupreply_table = "radgroupreply"
sql: usergroup_table = "usergroup"
sql: nas_table = "nas"
sql: dict_table = "dictionary"
sql: sqltrace = yes
sql: sqltracefile = "/opt/freeradius/var/log/radius/sqltrace.sql"
sql: readclients = no
sql: deletestalesessions = yes
sql: num_sql_socks = 5
sql: sql_user_name = "%{User-Name}"
sql: default_user_profile = ""
sql: query_on_not_found = no
sql: authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM
radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id"
sql: authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM
radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id"
sql: authorize_group_check_query = "SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username =
'%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName
ORDER BY radgroupcheck.id"
sql: authorize_group_reply_query = "SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username =
'%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName
ORDER BY radgroupreply.id"
sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S',
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime),
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
sql: accounting_update_query = "UPDATE radacct ? SET FramedIPAddress =
'%{Framed-IP-Address}', ? AcctSessionTime = '%{Acct-Session-Time}', ?
AcctInputOctets = '%{Acct-Input-Octets}', ? AcctOutputOctets =
'%{Acct-Output-Octets}' ? WHERE AcctSessionId = '%{Acct-Session-Id}' ?
AND UserName = '%{SQL-User-Name}' ? AND NASIPAddress= '%{NAS-IP-Address}'"
sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start,
AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId,
ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay)
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} +
%{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}',
'%{Acct-Authentic}', '', '%{Acct-Input-Octets}',
'%{Acct-Output-Octets}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '0')"
sql: accounting_start_query = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets,
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType,
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay)
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}',
'%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime =
'%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start =
'%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND
UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S',
AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets =
'%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}',
AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE
AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}'
AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets,
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType,
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay)
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} +
%{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}',
'%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}',
'%{Acct-Output-Octets}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE
UserName='%{SQL-User-Name}'"
sql: connect_failure_retry_delay = 60
sql: simul_count_query = ""
sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName,
NASIPAddress, NASPortId, FramedIPAddress, CallingStationId,
FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND
AcctStopTime = 0"
sql: postauth_table = "radpostauth"
sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply,
date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}',
'%{reply:Packet-Type}', NOW())"
sql: safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
linked
rlm_sql (sql): Attempting to connect to root at 64.240.76.3:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile =
"/opt/freeradius/var/log/radius/radacct/%{Client-IP-Address}/detail"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/opt/freeradius/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Initializing the thread pool...
thread: start_servers = 5
thread: max_servers = 32
thread: min_spare_servers = 3
thread: max_spare_servers = 10
thread: max_requests_per_server = 0
thread: cleanup_delay = 5
Thread 1 waiting to be assigned a request
Thread spawned new child 1. Total threads in pool: 1
Thread spawned new child 2. Total threads in pool: 2
Thread 2 waiting to be assigned a request
Thread 3 waiting to be assigned a request
Thread spawned new child 3. Total threads in pool: 3
Thread 4 waiting to be assigned a request
Thread spawned new child 4. Total threads in pool: 4
Thread spawned new child 5. Total threads in pool: 5
Thread pool initialized
Listening on authentication *:1645
Listening on accounting *:1646
Listening on proxy *:1647
Ready to process requests.
Thread 5 waiting to be assigned a request
rad_recv: Access-Request packet from host 64.240.76.3:33187, id=226,
length=73
--- Walking the entire request list ---
Waking up in 31 seconds...
Threads: total/active/spare threads = 5/0/5
Thread 1 got semaphore
Thread 1 handling request 0, (1 handled so far)
User-Name = "rniclh at surftheusa.com"
User-Password = "test123"
NAS-IP-Address = 255.255.255.255
NAS-Port = 100
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
hints: Matched other at 80
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "attr_filter" returns noop for request 0
modcall[authorize]: module "chap" returns noop for request 0
rlm_realm: No '@' in User-Name = "rniclh", skipping NULL due to config.
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 0
users: Matched entry DEFAULT at line 159
users: Matched entry DEFAULT at line 178
users: Matched entry DEFAULT at line 190
modcall[authorize]: module "files" returns ok for request 0
radius_xlat: 'rniclh'
rlm_sql (sql): sql_set_user escaped user --> 'rniclh'
radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE
Username = 'rniclh' ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 4
rlm_sql_mysql: query: SELECT id,UserName,Attribute,Value,op FROM
radcheck WHERE Username = 'rniclh' ORDER BY id
radius_xlat: 'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = 'rniclh' AND
usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
rlm_sql_mysql: query: SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = 'rniclh' AND
usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id
radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE
Username = 'rniclh' ORDER BY id'
rlm_sql_mysql: query: SELECT id,UserName,Attribute,Value,op FROM
radreply WHERE Username = 'rniclh' ORDER BY id
radius_xlat: 'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = 'rniclh' AND
usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql_mysql: query: SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = 'rniclh' AND
usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id
rlm_sql (sql): Released sql socket id: 4
modcall[authorize]: module "sql" returns ok for request 0
modcall: group authorize returns ok for request 0
rad_check_password: Found Auth-Type System
auth: type "System"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_unix: [rniclh]: invalid password
modcall[authenticate]: module "unix" returns reject for request 0
modcall: group authenticate returns reject for request 0
auth: Failed to validate the user.
Login incorrect: [rniclh/test123] (from client ras1 port 100)
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
Thread 1 waiting to be assigned a request
rad_recv: Access-Request packet from host 64.240.76.3:33187, id=226,
length=73
Sending Access-Reject of id 226 to 64.240.76.3:33187
Slipstream-Auth = "false"
--- Walking the entire request list ---
Waking up in 3 seconds...
More information about the Freeradius-Users
mailing list