Can do EAP/TLS, but not EAP/MD5

[Jefri bin Dahari]

It works. Thank you very much Vladimir.

----- Original Message ----- 
From: "Vladimir Vuksan" <vlists at veus.hr>
To: "FreeRadius users mailing list" <freeradius-users at lists.freeradius.org>
Sent: Friday, July 08, 2005 14:39
Subject: Re: Can do EAP/TLS, but not EAP/MD5


> Jefri bin Dahari wrote:
>
>> I have Freeradius running where wireless users authenticate using 
>> EAP/TLS. Now, I would like to use the same server to authenticate wired 
>> users using EAP/MD5 on Cisco switch 3750 but it doesn't work. The log 
>> shows it doesn't do EAP authentication as shown below. Attached is my 
>> eap.conf.
>
>
> You appear to be setting Auth-Type to Local. Check your Users file and see 
> where the Auth-Type := Local or similar is getting set. Comment it out.
>
> Vladimir
>
>>
>>    users: Matched entry jeff at line 6
>>  modcall[authorize]: module "files" returns ok for request 0
>> modcall: group authorize returns updated for request 0
>>  rad_check_password:  Found Auth-Type Local
>> auth: type Local
>> auth: No User-Password or CHAP-Password attribute in the request
>> auth: Failed to validate the user.
>
> - List info/subscribe/unsubscribe? See 
> http://www.freeradius.org/list/users.html
>