Issue with increasing the number of ACL's in users file

[Niall Browne]

Hi

 I am having a problem with an apparent limit on ACL's on my freeradius
servers. I have been running this servers for a number of years, and have
always had the number of ACL's on the users file below 52, and have never
had any problems.

 I noticed as soon as I increased the ACL's above 52  it appeared to
authenticate in the logs, however the auth connection through Cisco VPN
simply continued to try to authenticate and nothing happened. As soon as I
removed the ACL's below 52 and restarted it works fine.

I dumped the logs 

 /usr/local/freeradius/sbin/radiusd -p 1647 -sfxxyz -l stdout

  When I then auth'd and viewed the stdout logs, they are identical for <52
and then >52 (when compared). The only difference is that the ACL's after
the magic 52 mark do not show in the stout, and this causes my timeout to
fail. When I revert to <52 I can see the last ACL's and all works fine.

  I have checked through the configs including radiusd.conf however I cannot
find a hard coded limitation on ACL's anywhere.

  Is anyone aware of how to resolve this ?

Thanks in advance,
 Niall
 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20050622/3d6e6c8f/attachment.html>