Bus error - core dumped on freeradius 1.0.5
Dusty Doris
freeradius at mail.doris.cc
Tue Sep 27 22:36:56 CEST 2005
Yep.
FreeBSD 5.4-RELEASE-p7
/usr/local/freeradius105/sbin/radiusd -v
radiusd: FreeRADIUS Version 1.0.5, for host , built on Sep 27 2005 at
11:31:35
clip from startup and handling a packet. The config file is very
stripped down right now. I'll fire one up later today with the default
setup to see if that works too.
---------
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql)
Listening on accounting *:1813
Ready to process requests.
rad_recv: Accounting-Request packet from host 127.0.0.1:54936, id=90,
length=32
User-Name = "test"
Acct-Status-Type = Start
Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 0
rlm_acct_unique: WARNING: Attribute NAS-Port was not found in request,
unique ID
MAY be inconsistent
rlm_acct_unique: WARNING: Attribute Client-IP-Address was not found in
request,
unique ID MAY be inconsistent
rlm_acct_unique: WARNING: Attribute NAS-IP-Address was not found in
request, uni
que ID MAY be inconsistent
rlm_acct_unique: WARNING: Attribute Acct-Session-Id was not found in
request, un
ique ID MAY be inconsistent
rlm_acct_unique: Hashing ',,,,User-Name = "test"'
rlm_acct_unique: Acct-Unique-Session-ID = "c62495cf388d0bb3".
modcall[preacct]: module "acct_unique" returns ok for request 0
modcall[preacct]: module "files" returns noop for request 0
modcall: group preacct returns ok for request 0
Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 0
radius_xlat: 'test'
rlm_sql (sql): sql_set_user escaped user --> 'test'
radius_xlat: 'INSERT into radacct (AcctSessionId, AcctUniqueId, UserName,
Realm
, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime,
AcctSession
Time, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets,
AcctO
utputOctets, CalledStationId, CallingStationId, AcctTerminateCause,
ServiceType,
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('',
'c62
495cf388d0bb3', 'test', '', '', '', '', '2005-09-27 14:33:54', '0', '0',
'', '',
'', '0', '0', '', '', '', '', '', '', '', '0')'
rlm_sql (sql): Reserving sql socket id: 4
rlm_sql (sql): Released sql socket id: 4
modcall[accounting]: module "sql" returns ok for request 0
modcall: group accounting returns ok for request 0
Sending Accounting-Response of id 90 to 127.0.0.1:54936
Finished request 0
Going to the next request
--- Walking the entire request list ---
Cleaning up request 0 ID 90 with timestamp 43399092
Nothing to do. Sleeping until we see a request.
On Tue, 27 Sep 2005, Richard Cotrina wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Have you enabled rlm_sql_mysql in radiusd.conf and sql.conf ? How your
> config files look like ?
>
> If rlm_sql_mysql is not enabled, freeradius daemon works without problem for
> me.
>
> - ----- Original Message -----
> From: "Dusty Doris" <freeradius at mail.doris.cc>
> To: "FreeRadius users mailing list" <freeradius-users at lists.freeradius.org>
> Sent: Tuesday, September 27, 2005 12:44 PM
> Subject: Re: Bus error - core dumped on freeradius 1.0.5
>
>
>> I just installed freeradius 1.0.5 on freebsd 5.4 and I am not having
>> problems with rlm_sql_mysql. I just started it up and used it for testing
>> an accounting packet. I haven't tried authentication, but I don't think
>> that should matter.
>>
>> How did you build it? Since the port is still on 1.0.4, I'm assuming it
>> was from source?
>>
>> Here is what I did. First I installed mysql. I use the port in
>> /usr/ports/databases/mysql41-server. Then I installed freeradius from
>> /usr/ports/net/freeradius first to get all the dependancies. These
>> include libtool, gmake, gdbm, libltdl. Then I did a make deinstall on
>> that port and build freeradius from source using only ./configure
>> --prefix.
>>
>>
>> On Tue, 27 Sep 2005, Richard Cotrina wrote:
>>
>>> -----BEGIN PGP SIGNED MESSAGE-----
>>> Hash: SHA1
>>>
>>> segmentation fault when rlm_sql_mysql is enabled (bug 271), happens both
> in
>>> FreeBSD 4.X and FreeBSD 5.X.
>>>
>>> - ----- Original Message -----
>>> From: "Alan DeKok" <aland at ox.org>
>>> To: "FreeRadius users mailing list"
> <freeradius-users at lists.freeradius.org>
>>> Sent: Tuesday, September 27, 2005 12:08 AM
>>> Subject: Re: Bus error - core dumped on freeradius 1.0.5
>>>
>>>
>>>> "Rohaizam Abu Bakar" <haizam at myjaring.net> wrote:
>>>>> So.. do i need to upgrade to 5.X in order to use FR 1.0.5 ??
>>>>
>>>> For MySQL, perhaps.
>>>>
>>>> Or, find out what's causing the problem in FreeBSD 4.x, and fix it.
>>>>
>>>> It doesn't happen on other platforms, so I suspect it's an issue
>>>> specific to FreeBSD 4.x.
>>>>
>>>> Alan DeKok.
>>>>
>>>
>>>
>>
>
>
> -----BEGIN PGP SIGNATURE-----
> Version: PGP Desktop 9.0.1 (Build 2185)
>
> iQA/AwUBQzmKjSQekFb/3FIhEQIkxwCeJQFEu1qYBV3ttdru/1pVj/axGusAnjLk
> xjHBg+h+EwPoEvsAroNz+n3W
> =Eb35
> -----END PGP SIGNATURE-----
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
More information about the Freeradius-Users
mailing list