Problem with Cisco-AVPair

[Antonio Matera]

Hi,
I don't know how can i resolve my problem ...

With this user:

vlan3  Cisco-AVPair == "ssid=VLAN3", User-Password := "test"
           Tunnel-Medium-Type = IEEE-802,
           Tunnel-Private-Group-Id = 3,
           Tunnel-Type = VLAN

I have always the same problem... this is my log:

rad_recv: Access-Request packet from host 192.168.9.104:1645, id=29, 
length=240
	User-Name =  "vlan3"
         Framed-MTU = 1400
         Called-Station-Id = "0012.dacb.8420"
         Calling-Station-Id = "000c.f135.f1ba"
         Cisco-AVPair = "ssid=VLAN3"
         Service-Type = Login-User
         Message-Authenticator = 0x9873358109c27321d39f54fcaa44b983
         EAP-Message = 
0x0208005019001703010020abbfc50d6f7a13a8226e008a01441a4e94f2565c4eec010d12551692bfc9eea11703010020ea39080c7e56fafd97e7cb195e21a02a445b5632d50a356d96bf10a3082d53e2
         NAS-Port-Type = Wireless-802.11
         Cisco-NAS-Port = "263"
         NAS-Port = 263
         State = 0x1846e133758faf753fefeedfd54cc831
         NAS-IP-Address = 192.168.9.104
         NAS-Identifier = "ap"
   Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
   modcall[authorize]: module "preprocess" returns ok for request 7
   modcall[authorize]: module "mschap" returns noop for request 7
     rlm_realm: No '@' in User-Name = "vlan3", looking up realm NULL
     rlm_realm: No such realm "NULL"
   modcall[authorize]: module "suffix" returns noop for request 7
   rlm_eap: EAP packet type response id 8 length 80
   rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
   modcall[authorize]: module "eap" returns updated for request 7
     users: Matched entry vlan3 at line 24
   modcall[authorize]: module "files" returns ok for request 7
modcall: leaving group authorize (returns updated) for request 7
   rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
   Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
   rlm_eap: Request found, released from the list
   rlm_eap: EAP/peap
   rlm_eap: processing type peap
   rlm_eap_peap: Authenticate
   rlm_eap_tls: processing TLS
   eaptls_verify returned 7
   rlm_eap_tls: Done initial handshake
   eaptls_process returned 7
   rlm_eap_peap: EAPTLS_OK
   rlm_eap_peap: Session established.  Decoding tunneled attributes.
   rlm_eap_peap: Received EAP-TLV response.
   rlm_eap_peap: Tunneled data is valid.
   rlm_eap_peap:  Had sent TLV failure.  User was rejcted rejected 
earlier in this session.
  rlm_eap: Handler failed in EAP/peap
   rlm_eap: Failed in EAP select
   modcall[authenticate]: module "eap" returns invalid for request 7
modcall: leaving group authenticate (returns invalid) for request 7
auth: Failed to validate the user.
Login incorrect: [vlan3/<no User-Password attribute>] (from client 
ap-test port 263 cli 000c.f135.f1ba)
Delaying request 7 for 1 seconds
Finished request 7
Going to the next request



It is possibile that my problem is this?
rlm_eap_peap:  Had sent TLV failure.  User was rejcted rejected earlier 
in this session.


I tried a lot of thing but I can't find a solution for my problem...

Thanks, bye Antonio




on 15/04/2006 20.03 Alan DeKok said the following:
> Bertrand Poulet <bertrand.poulet at pasteur-lille.fr> wrote:
>> at line 66 of users files , i've got :
>> bertrand    Cisco-AVPair == "ssid=my_ssid", User-Password == "bertrand"
> 
>   Use := for User-Password.
> 
>   Alan DeKok.
>