Help with peap-eap/mschapv2
adreas Polyxronopoulos
apolyxrono at yahoo.co.uk
Sat Dec 30 23:02:25 CET 2006
<!--
_filtered {margin:0.79in;}
P {margin-bottom:0.08in;}
-->Hi everyone
Merry Christmas and a Happy new year ,
I am trying to set up freeradius-1.1.3 for a wlan using peap -
eap/mschapv2. I have downloaded the source of freeradius-1.1.3 and
compile it (./configure , make , make install). My wireless supplicant is on windows xp SP2. I use users file for authentication .
I will show you the radiusd -X output and the freeradius behavior when the supplicant tries to connect to the wlan:
root at apolyxrono2:~# radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /usr/local/etc/raddb/proxy.conf
Config: including file: /usr/local/etc/raddb/clients.conf
Config: including file: /usr/local/etc/raddb/snmp.conf
Config: including file: /usr/local/etc/raddb/eap.conf
Config: including file: /usr/local/etc/raddb/sql.conf
main: prefix = "/usr/local"
main: localstatedir = "/usr/local/var"
main: logdir = "/usr/local/var/log/radius"
main: libdir = "/usr/local/lib"
main: radacctdir = "/usr/local/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/usr/local/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
main: bind_address = 10.0.0.15 IP address [10.0.0.15]
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = no
mschap: require_encryption = yes
mschap: require_strong = yes
mschap: with_ntdomain_hack = yes
mschap: passwd = "(null)"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "peap"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file = "/usr/local/etc/raddb/certs/server_keycert.pem"
tls: certificate_file = "/usr/local/etc/raddb/certs/server_keycert.pem"
tls: CA_file = "/usr/local/etc/raddb/certs/demoCA/cacert.pem"
tls: private_key_password = "whatever"
tls: dh_file = "/usr/local/etc/raddb/certs/dh"
tls: random_file = "/usr/local/etc/raddb/certs/random"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = no
tls: check_cert_cn = "(null)"
tls: cipher_list = "(null)"
tls: check_cert_issuer = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
rlm_eap: Loaded and initialized type tls
peap: default_eap_type = "mschapv2"
peap: copy_request_to_tunnel = yes
peap: use_tunneled_reply = no
peap: proxy_tunneled_request_as_eap = yes
rlm_eap: Loaded and initialized type peap
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
preprocess: hints = "/usr/local/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/usr/local/etc/raddb/users"
files: acctusersfile = "/usr/local/etc/raddb/acct_users"
files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/usr/local/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication 10.0.0.15:1812
Listening on accounting 10.0.0.15:1813
Ready to process requests.
rad_recv: Access-Request packet from host 10.0.0.10:3794, id=160, length=132
NAS-IP-Address = 10.0.0.10
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Framed-MTU = 1400
User-Name = "someone"
Calling-Station-Id = "00166f122595"
Called-Station-Id = "000d545c4190"
NAS-Identifier = "3Com Access Point"
EAP-Message = 0x0201000c01736f6d656f6e65
Message-Authenticator = 0x160e121c6c28afb7f18ee9f0862390d0
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "someone", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 1 length 12
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched entry DEFAULT at line 155
users: Matched entry someone at line 219
modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
rad_check_password: Found Auth-Type Local
auth: type Local
auth: No User-Password or CHAP-Password attribute in the request
auth: Failed to validate the user.
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 160 to 10.0.0.10 port 3794
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 160 with timestamp 4596dbfe
Nothing to do. Sleeping until we see a request.
rad_recv: Accounting-Request packet from host 10.0.0.10:3791, id=45, length=166
Acct-Status-Type = Start
Acct-Session-Id = "00166f122595-000d54fdb5ea-bcf9"
NAS-IP-Address = 10.0.0.10
Acct-Input-Octets = 198
Acct-Output-Octets = 122
Acct-Input-Packets = 3
Acct-Output-Packets = 3
User-Name = "not available"
Vendor-Specific = 0x564c414e2049442069733a2030
Vendor-Specific = 0x4553534944203d206d794170
Vendor-Specific = 0x45415020547970652069733a206e6f7420617661696c61626c65
Acct-Session-Time = 26
Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 1
modcall[preacct]: module "preprocess" returns noop for request 1
rlm_acct_unique: WARNING: Attribute NAS-Port was not found in request, unique ID MAY be inconsistent
rlm_acct_unique: Hashing ',Client-IP-Address = 10.0.0.10,NAS-IP-Address = 10.0.0.10,Acct-Session-Id = "00166f122595-000d54fdb5ea-bcf9",User-Name = "not available"'
rlm_acct_unique: Acct-Unique-Session-ID = "11a74fb405c72016".
modcall[preacct]: module "acct_unique" returns ok for request 1
rlm_realm: No '@' in User-Name = "not available", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[preacct]: module "suffix" returns noop for request 1
modcall[preacct]: module "files" returns noop for request 1
modcall: leaving group preacct (returns ok) for request 1
Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 1
radius_xlat: '/usr/local/var/log/radius/radacct/10.0.0.10/detail-20061230'
rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/10.0.0.10/detail-20061230
modcall[accounting]: module "detail" returns ok for request 1
modcall[accounting]: module "unix" returns noop for request 1
radius_xlat: '/usr/local/var/log/radius/radutmp'
radius_xlat: 'not available'
rlm_radutmp: No NAS-Port seen. Cannot do anything.
rlm_radumtp: WARNING: checkrad will probably not work!
modcall[accounting]: module "radutmp" returns noop for request 1
modcall: leaving group accounting (returns ok) for request 1
Sending Accounting-Response of id 45 to 10.0.0.10 port 3791
Finished request 1
Going to the next request
--- Walking the entire request list ---
Cleaning up request 1 ID 45 with timestamp 4596dc07
Nothing to do. Sleeping until we see a request.
..............................
Why the authentication of "someone" user failed ? What does it means : module "mschap" returns noop for request 0 ? Is it important debug info ?
thanks
Adreas Polyxronopoulos
Send instant messages to your online friends http://uk.messenger.yahoo.com
Send instant messages to your online friends http://uk.messenger.yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20061230/b553204b/attachment.html>
More information about the Freeradius-Users
mailing list