windows XP computer WPA, TKIP, PEAP, EAP-MSCHAP v2 has "No User-Password or CHAP-Password attribute in the request"

[PoWah Wong]

"users" file is changed to:

test	Auth-Type = Local, User-Password := "testing"

However, still has problem.
Debug output is:
rad_recv: Access-Request packet from host
127.0.0.1:52001, id=42, length=149
        Framed-MTU = 1380
        NAS-IP-Address = 0.0.0.0
        NAS-Identifier = "wifictrl"
        User-Name = "test"
        NAS-Port-Id = ":2:2"
        Service-Type = Framed-User
        NAS-Port-Type = Wireless-802.11
        Called-Station-Id = "00-f0-00-06-67-c0"
        Calling-Station-Id = "00-20-a6-57-7a-d1"
        State = 0x41653c6968055aecfa354aa7a6ed95a0
        EAP-Message = 0x020200060319
        Message-Authenticator =
0x6b63991cc7c8d008d37a418927f261a4
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
  modcall[authorize]: module "preprocess" returns ok
for request 2
  modcall[authorize]: module "chap" returns noop for
request 2
  modcall[authorize]: module "mschap" returns noop for
request 2
    rlm_realm: No '@' in User-Name = "test", looking
up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for
request 2
  rlm_eap: EAP packet type response id 2 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP
conversation
  modcall[authorize]: module "eap" returns updated for
request 2
    users: Matched test at 90
radius_xlat:  'Hello, test'
  modcall[authorize]: module "files" returns ok for
request 2
modcall: group authorize returns updated for request 2
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
  rlm_eap: Request found, released from the list
  rlm_eap: EAP NAK
 rlm_eap: EAP-NAK asked for EAP-Type/peap
 rlm_eap: No such EAP type peap
  rlm_eap: Failed in EAP select
  modcall[authenticate]: module "eap" returns invalid
for request 2
modcall: group authenticate returns invalid for
request 2
auth: Failed to validate the user.
Delaying request 2 for 1 seconds
Finished request 2
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 1 ID 41 with timestamp 43d55f0d
Sending Access-Reject of id 42 to 127.0.0.1:52001
        EAP-Message = 0x04020004
        Message-Authenticator =
0x00000000000000000000000000000000
        Reply-Message = "Hello, test"
Cleaning up request 2 ID 42 with timestamp 43d55f0d
Nothing to do.  Sleeping until we see a request.

--- Alan DeKok <aland at ox.org> wrote:

> PoWah Wong <wong_powah at yahoo.ca> wrote:
> > I configure /etc/raddb/users as follows:
> > test    Auth-Type := Local, User-Password ==
> "testing"
> 
>  That should be
> 
> test    Auth-Type = Local, User-Password :=
> "testing"
> 
>   See the "man" page for the "users" file, and other
> posts to this list.
> 
>   Alan DeKok.
> - 
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
> 



	

	
		
__________________________________________________________ 
Find your next car at http://autos.yahoo.ca