"unknown module eap" error

[simon at 434canada.com]

Hello,

I was running freeRadius version 1.1.1, and everything was working smoothly.  I then had to reformat my server, so I saved my entire raddb config directory so that I would not need to start completely from scratch.  However, I have now installed version 1.1.2, and I cannot get it running properly.  I have included the output from running in debug mode below.

Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /usr/local/etc/raddb/proxy.conf
Config:   including file: /usr/local/etc/raddb/clients.conf
Config:   including file: /usr/local/etc/raddb/snmp.conf
Config:   including file: /usr/local/etc/raddb/eap.conf
Config:   including file: /usr/local/etc/raddb/sql.conf
 main: prefix = "/usr/local"
 main: localstatedir = "/usr/local/var"
 main: logdir = "/usr/local/var/log/radius"
 main: libdir = "/usr/local/lib"
 main: radacctdir = "/usr/local/var/log/radius/radacct"
 main: hostname_lookups = no
 main: max_request_time = 60
 main: cleanup_delay = 6
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 0
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/usr/local/var/log/radius/radius.log"
 main: log_auth = yes
 main: log_auth_badpass = yes
 main: log_auth_goodpass = no
 main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
 main: user = "nobody"
 main: group = "nobody"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/local/sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = no
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
 pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = no
 mschap: passwd = "(null)"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "(null)"
 unix: group = "(null)"
 unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
 eap: default_eap_type = "peap"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
rlm_eap: Failed to link EAP-Type/tls: file not found
radiusd.conf[10]: eap: Module instantiation failed.
radiusd.conf[1894] Unknown module "eap".
radiusd.conf[1841] Failed to parse authenticate section.

Any help or advice would be appreciated.

Thanks,

Simon