LDAP check attributes
Antonio Matera
antonio.matera at create-net.it
Tue May 16 12:52:50 CEST 2006
Anyone can help me?
Thanks, bye Antonio
on 15/05/2006 11.06 Antonio Matera said the following:
> Hallo, I have a problem with the LDAP attributes.
> I want set an ssid check in my radius authentication.
> If I do it with the user file all works fine.
> Now I want to insert this attribute in the ldap schema.
> I have inserted a new attribute radiusCisco-AVpair in my schema with
> value ssid=VLAN3 and in the ldap.attrmap file I have inserted the
> following row:
>
> checkItem Cisco-AVPair radiusCiscoAVpair
>
> and the ldap module is:
>
> ldap {
> server = "localhost"
> basedn = "dc=create-net,dc=org"
> password_attribute = userPassword
> start_tls = no
> ldap_connections_number = 5
> }
>
>
>
> but with this configuration my LDAP user is always authenticate with any
> ssid. What is wrong? Thanks
>
> This is my log file:
>
>
> Starting - reading configuration files ...
> reread_config: reading radiusd.conf
> Config: including file: /usr/local/etc/raddb/proxy.conf
> Config: including file: /usr/local/etc/raddb/clients.conf
> Config: including file: /usr/local/etc/raddb/snmp.conf
> Config: including file: /usr/local/etc/raddb/eap.conf
> Config: including file: /usr/local/etc/raddb/sql.conf
> main: prefix = "/usr/local"
> main: localstatedir = "/usr/local/var"
> main: logdir = "/usr/local/var/log/radius"
> main: libdir = "/usr/local/lib"
> main: radacctdir = "/usr/local/var/log/radius/radacct"
> main: hostname_lookups = no
> main: max_request_time = 30
> main: cleanup_delay = 5
> main: max_requests = 1024
> main: delete_blocked_requests = 0
> main: port = 1812
> main: allow_core_dumps = no
> main: log_stripped_names = no
> main: log_file = "/usr/local/var/log/radius/radius.log"
> main: log_auth = yes
> main: log_auth_badpass = yes
> main: log_auth_goodpass = yes
> main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
> main: bind_address = 192.168.20.2 IP address [192.168.20.2]
> main: user = "(null)"
> main: group = "(null)"
> main: usercollide = no
> main: lower_user = "no"
> main: lower_pass = "no"
> main: nospace_user = "no"
> main: nospace_pass = "no"
> main: checkrad = "/usr/local/sbin/checkrad"
> main: proxy_requests = no
> proxy: retry_delay = 5
> proxy: retry_count = 3
> proxy: synchronous = no
> proxy: default_fallback = yes
> proxy: dead_time = 120
> proxy: post_proxy_authorize = no
> proxy: wake_all_if_all_dead = no
> security: max_attributes = 200
> security: reject_delay = 1
> security: status_server = yes
> main: debug_level = 0
> read_config_files: reading dictionary
> read_config_files: reading naslist
> Using deprecated naslist file. Support for this will go away soon.
> read_config_files: reading clients
> read_config_files: reading realms
> radiusd: entering modules setup
> Module: Library search path is /usr/local/lib
> Module: Loaded exec
> exec: wait = yes
> exec: program = "(null)"
> exec: input_pairs = "request"
> exec: output_pairs = "(null)"
> exec: packet_type = "(null)"
> rlm_exec: Wait=yes but no output defined. Did you mean output=none?
> Module: Instantiated exec (exec)
> Module: Loaded expr
> Module: Instantiated expr (expr)
> Module: Loaded CHAP
> Module: Instantiated chap (chap)
> Module: Loaded MS-CHAP
> mschap: use_mppe = yes
> mschap: require_encryption = no
> mschap: require_strong = no
> mschap: with_ntdomain_hack = no
> mschap: passwd = "(null)"
> mschap: authtype = "MS-CHAP"
> mschap: ntlm_auth = "(null)"
> Module: Instantiated mschap (mschap)
> Module: Loaded LDAP
> ldap: server = "localhost"
> ldap: port = 389
> ldap: net_timeout = 1
> ldap: timeout = 4
> ldap: timelimit = 3
> ldap: identity = ""
> ldap: tls_mode = no
> ldap: start_tls = no
> ldap: tls_cacertfile = "(null)"
> ldap: tls_cacertdir = "(null)"
> ldap: tls_certfile = "(null)"
> ldap: tls_keyfile = "(null)"
> ldap: tls_randfile = "(null)"
> ldap: tls_require_cert = "allow"
> ldap: password = ""
> ldap: basedn = "dc=create-net,dc=org"
> ldap: filter = "(uid=%{Stripped-User-Name:-%{User-Name}})"
> ldap: base_filter = "(objectclass=radiusprofile)"
> ldap: default_profile = "(null)"
> ldap: profile_attribute = "(null)"
> ldap: password_header = "(null)"
> ldap: password_attribute = "userPassword"
> ldap: access_attr = "(null)"
> ldap: groupname_attribute = "cn"
> ldap: groupmembership_filter =
> "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
>
> ldap: groupmembership_attribute = "(null)"
> ldap: dictionary_mapping = "/usr/local/etc/raddb/ldap.attrmap"
> ldap: ldap_debug = 0
> ldap: ldap_connections_number = 5
> ldap: compare_check_items = no
> ldap: access_attr_used_for_allow = yes
> ldap: do_xlat = yes
> ldap: set_auth_type = yes
> rlm_ldap: Registering ldap_groupcmp for Ldap-Group
> rlm_ldap: Registering ldap_xlat with xlat_name ldap
> rlm_ldap: reading ldap<->radius mappings from file
> /usr/local/etc/raddb/ldap.attrmap
> rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
> rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
> rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
> rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
> rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
> rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
> rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
> rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
> rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
> rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
> rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
> rlm_ldap: LDAP radiusCisco-AVpair mapped to RADIUS Cisco-AVPair
> rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
> rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
> rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
> rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
> rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
> rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
> rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
> rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
> rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
> rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
> rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
> rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
> rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
> rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
> rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
> rlm_ldap: LDAP radiusClass mapped to RADIUS Class
> rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
> rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
> rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
> rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
> rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
> rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
> rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS
> Framed-AppleTalk-Link
> rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
> Framed-AppleTalk-Network
> rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS
> Framed-AppleTalk-Zone
> rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
> rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
> rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
> conns: 0x9730f88
> Module: Instantiated ldap (ldap)
> Module: Loaded eap
> eap: default_eap_type = "tls"
> eap: timer_expire = 60
> eap: ignore_unknown_eap_types = no
> eap: cisco_accounting_username_bug = no
> rlm_eap: Loaded and initialized type md5
> rlm_eap: Loaded and initialized type leap
> gtc: challenge = "Password: "
> gtc: auth_type = "PAP"
> rlm_eap: Loaded and initialized type gtc
> tls: rsa_key_exchange = no
> tls: dh_key_exchange = yes
> tls: rsa_key_length = 512
> tls: dh_key_length = 512
> tls: verify_depth = 0
> tls: CA_path = "/usr/local/etc/raddb/certs/masterkeys2/"
> tls: pem_file_type = yes
> tls: private_key_file =
> "/usr/local/etc/raddb/certs/masterkeys2/cert-srv.pem"
> tls: certificate_file =
> "/usr/local/etc/raddb/certs/masterkeys2/cert-srv.pem"
> tls: CA_file = "/usr/local/etc/raddb/certs/masterkeys2/root.pem"
> tls: private_key_password = "whatever"
> tls: dh_file = "/usr/local/etc/raddb/certs/dh"
> tls: random_file = "/usr/local/etc/raddb/certs/random"
> tls: fragment_size = 1024
> tls: include_length = yes
> tls: check_crl = yes
> tls: check_cert_cn = "%{User-Name}"
> rlm_eap_tls: Loading the certificate file as a chain
> rlm_eap: Loaded and initialized type tls
> peap: default_eap_type = "mschapv2"
> peap: copy_request_to_tunnel = yes
> peap: use_tunneled_reply = no
> peap: proxy_tunneled_request_as_eap = yes
> rlm_eap: Loaded and initialized type peap
> mschapv2: with_ntdomain_hack = no
> rlm_eap: Loaded and initialized type mschapv2
> Module: Instantiated eap (eap)
> Module: Loaded preprocess
> preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
> preprocess: hints = "/usr/local/etc/raddb/hints"
> preprocess: with_ascend_hack = no
> preprocess: ascend_channels_per_line = 23
> preprocess: with_ntdomain_hack = no
> preprocess: with_specialix_jetstream_hack = no
> preprocess: with_cisco_vsa_hack = yes
> Module: Instantiated preprocess (preprocess)
> Module: Loaded realm
> realm: format = "suffix"
> realm: delimiter = "@"
> realm: ignore_default = no
> realm: ignore_null = no
> Module: Instantiated realm (suffix)
> Module: Loaded files
> files: usersfile = "/usr/local/etc/raddb/users"
> files: acctusersfile = "/usr/local/etc/raddb/acct_users"
> files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
> files: compat = "no"
> Module: Instantiated files (files)
> Module: Loaded Acct-Unique-Session-Id
> acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
> Client-IP-Address, NAS-Port"
> Module: Instantiated acct_unique (acct_unique)
> Module: Loaded detail
> detail: detailfile =
> "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
> detail: detailperm = 384
> detail: dirperm = 493
> detail: locking = no
> Module: Instantiated detail (detail)
> Module: Loaded System
> unix: cache = no
> unix: passwd = "(null)"
> unix: shadow = "/etc/shadow"
> unix: group = "(null)"
> unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
> unix: usegroup = no
> unix: cache_reload = 600
> Module: Instantiated unix (unix)
> Module: Loaded radutmp
> radutmp: filename = "/usr/local/var/log/radius/radutmp"
> radutmp: username = "%{User-Name}"
> radutmp: case_sensitive = yes
> radutmp: check_with_nas = yes
> radutmp: perm = 384
> radutmp: callerid = yes
> Module: Instantiated radutmp (radutmp)
> Listening on authentication 192.168.20.2:1812
> Listening on accounting 192.168.20.2:1813
> Ready to process requests.
> rad_recv: Access-Request packet from host 192.168.20.4:1645, id=86,
> length=164
> User-Name = "testradius"
> Framed-MTU = 1400
> Called-Station-Id = "0012.dacb.8420"
> Calling-Station-Id = "000c.f135.f1ba"
> Cisco-AVPair = "ssid=cn-test"
> Service-Type = Login-User
> Message-Authenticator = 0x8a43703112607b7280aeb5b4e4198e80
> EAP-Message = 0x0201000f0174657374726164697573
> NAS-Port-Type = Wireless-802.11
> Cisco-NAS-Port = "289"
> NAS-Port = 289
> NAS-IP-Address = 192.168.20.4
> NAS-Identifier = "ap"
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 0
> modcall[authorize]: module "preprocess" returns ok for request 0
> modcall[authorize]: module "mschap" returns noop for request 0
> rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 0
> rlm_eap: EAP packet type response id 1 length 15
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 0
> modcall[authorize]: module "files" returns notfound for request 0
> rlm_ldap: - authorize
> rlm_ldap: performing user authorization for testradius
> radius_xlat: '(uid=testradius)'
> radius_xlat: 'dc=create-net,dc=org'
> rlm_ldap: ldap_get_conn: Checking Id: 0
> rlm_ldap: ldap_get_conn: Got Id: 0
> rlm_ldap: attempting LDAP reconnection
> rlm_ldap: (re)connect to localhost:389, authentication 0
> rlm_ldap: bind as / to localhost:389
> rlm_ldap: waiting for bind result ...
> rlm_ldap: Bind was successful
> rlm_ldap: performing search in dc=create-net,dc=org, with filter
> (uid=testradius)
> rlm_ldap: Added password testradius in check items
> rlm_ldap: looking for check items in directory...
> rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 &
> op=21
> rlm_ldap: looking for reply items in directory...
> rlm_ldap: user testradius authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> modcall[authorize]: module "ldap" returns ok for request 0
> modcall: leaving group authorize (returns updated) for request 0
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 0
> rlm_eap: EAP Identity
> rlm_eap: processing type tls
> rlm_eap_tls: Requiring client certificate
> rlm_eap_tls: Initiate
> rlm_eap_tls: Start returned 1
> modcall[authenticate]: module "eap" returns handled for request 0
> modcall: leaving group authenticate (returns handled) for request 0
> Sending Access-Challenge of id 86 to 192.168.20.4 port 1645
> EAP-Message = 0x010200060d20
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xaa71830b1f63ad0e089e958ae1747901
> Finished request 0
> Going to the next request
> --- Walking the entire request list ---
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.20.4:1645, id=87,
> length=173
> User-Name = "testradius"
> Framed-MTU = 1400
> Called-Station-Id = "0012.dacb.8420"
> Calling-Station-Id = "000c.f135.f1ba"
> Cisco-AVPair = "ssid=cn-test"
> Service-Type = Login-User
> Message-Authenticator = 0x7531829c87b90b64accabf5f409e414f
> EAP-Message = 0x020200060319
> NAS-Port-Type = Wireless-802.11
> Cisco-NAS-Port = "289"
> NAS-Port = 289
> State = 0xaa71830b1f63ad0e089e958ae1747901
> NAS-IP-Address = 192.168.20.4
> NAS-Identifier = "ap"
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 1
> modcall[authorize]: module "preprocess" returns ok for request 1
> modcall[authorize]: module "mschap" returns noop for request 1
> rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 1
> rlm_eap: EAP packet type response id 2 length 6
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 1
> modcall[authorize]: module "files" returns notfound for request 1
> rlm_ldap: - authorize
> rlm_ldap: performing user authorization for testradius
> radius_xlat: '(uid=testradius)'
> radius_xlat: 'dc=create-net,dc=org'
> rlm_ldap: ldap_get_conn: Checking Id: 0
> rlm_ldap: ldap_get_conn: Got Id: 0
> rlm_ldap: performing search in dc=create-net,dc=org, with filter
> (uid=testradius)
> rlm_ldap: Added password testradius in check items
> rlm_ldap: looking for check items in directory...
> rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 &
> op=21
> rlm_ldap: looking for reply items in directory...
> rlm_ldap: user testradius authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> modcall[authorize]: module "ldap" returns ok for request 1
> modcall: leaving group authorize (returns updated) for request 1
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 1
> rlm_eap: Request found, released from the list
> rlm_eap: EAP NAK
> rlm_eap: EAP-NAK asked for EAP-Type/peap
> rlm_eap: processing type tls
> rlm_eap_tls: Initiate
> rlm_eap_tls: Start returned 1
> modcall[authenticate]: module "eap" returns handled for request 1
> modcall: leaving group authenticate (returns handled) for request 1
> Sending Access-Challenge of id 87 to 192.168.20.4 port 1645
> EAP-Message = 0x010300061920
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xca42865dfd4dc652e2dbb7797bb58dfe
> Finished request 1
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.20.4:1645, id=88,
> length=273
> User-Name = "testradius"
> Framed-MTU = 1400
> Called-Station-Id = "0012.dacb.8420"
> Calling-Station-Id = "000c.f135.f1ba"
> Cisco-AVPair = "ssid=cn-test"
> Service-Type = Login-User
> Message-Authenticator = 0x4ddfc31c44b93297b86317355163cef7
> EAP-Message =
> 0x0203006a198000000060160301005b0100005703014468424202d927a51cba80f4ed1c4c6c915225855eac3333887cf4ddb8fbb55f00003000390038003500160013000a00330032002f0066000500040065006400630062006000150012000900140011000800030100
>
> NAS-Port-Type = Wireless-802.11
> Cisco-NAS-Port = "289"
> NAS-Port = 289
> State = 0xca42865dfd4dc652e2dbb7797bb58dfe
> NAS-IP-Address = 192.168.20.4
> NAS-Identifier = "ap"
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 2
> modcall[authorize]: module "preprocess" returns ok for request 2
> modcall[authorize]: module "mschap" returns noop for request 2
> rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 2
> rlm_eap: EAP packet type response id 3 length 106
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 2
> modcall[authorize]: module "files" returns notfound for request 2
> rlm_ldap: - authorize
> rlm_ldap: performing user authorization for testradius
> radius_xlat: '(uid=testradius)'
> radius_xlat: 'dc=create-net,dc=org'
> rlm_ldap: ldap_get_conn: Checking Id: 0
> rlm_ldap: ldap_get_conn: Got Id: 0
> rlm_ldap: performing search in dc=create-net,dc=org, with filter
> (uid=testradius)
> rlm_ldap: Added password testradius in check items
> rlm_ldap: looking for check items in directory...
> rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 &
> op=21
> rlm_ldap: looking for reply items in directory...
> rlm_ldap: user testradius authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> modcall[authorize]: module "ldap" returns ok for request 2
> modcall: leaving group authorize (returns updated) for request 2
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 2
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> rlm_eap_tls: Length Included
> eaptls_verify returned 11
> (other): before/accept initialization
> TLS_accept: before/accept initialization
> rlm_eap_tls: <<< TLS 1.0 Handshake [length 005b], ClientHello
> TLS_accept: SSLv3 read client hello A
> rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
> TLS_accept: SSLv3 write server hello A
> rlm_eap_tls: >>> TLS 1.0 Handshake [length 0673], Certificate
> TLS_accept: SSLv3 write certificate A
> rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
> TLS_accept: SSLv3 write server done A
> TLS_accept: SSLv3 flush data
> TLS_accept:error in SSLv3 read client certificate A
> In SSL Handshake Phase
> In SSL Accept mode
> eaptls_process returned 13
> rlm_eap_peap: EAPTLS_HANDLED
> modcall[authenticate]: module "eap" returns handled for request 2
> modcall: leaving group authenticate (returns handled) for request 2
> Sending Access-Challenge of id 88 to 192.168.20.4 port 1645
> EAP-Message =
> 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
>
> EAP-Message =
> 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
>
> EAP-Message =
> 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
>
> EAP-Message =
> 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
>
> EAP-Message = 0x30305a170d3038303331343135313030305a30819431
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xf0f16fc3f467b1f240f723dfa11b62f3
> Finished request 2
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.20.4:1645, id=89,
> length=173
> User-Name = "testradius"
> Framed-MTU = 1400
> Called-Station-Id = "0012.dacb.8420"
> Calling-Station-Id = "000c.f135.f1ba"
> Cisco-AVPair = "ssid=cn-test"
> Service-Type = Login-User
> Message-Authenticator = 0xc86b8dcf602273235ee20371bf31cd64
> EAP-Message = 0x020400061900
> NAS-Port-Type = Wireless-802.11
> Cisco-NAS-Port = "289"
> NAS-Port = 289
> State = 0xf0f16fc3f467b1f240f723dfa11b62f3
> NAS-IP-Address = 192.168.20.4
> NAS-Identifier = "ap"
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 3
> modcall[authorize]: module "preprocess" returns ok for request 3
> modcall[authorize]: module "mschap" returns noop for request 3
> rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 3
> rlm_eap: EAP packet type response id 4 length 6
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 3
> modcall[authorize]: module "files" returns notfound for request 3
> rlm_ldap: - authorize
> rlm_ldap: performing user authorization for testradius
> radius_xlat: '(uid=testradius)'
> radius_xlat: 'dc=create-net,dc=org'
> rlm_ldap: ldap_get_conn: Checking Id: 0
> rlm_ldap: ldap_get_conn: Got Id: 0
> rlm_ldap: performing search in dc=create-net,dc=org, with filter
> (uid=testradius)
> rlm_ldap: Added password testradius in check items
> rlm_ldap: looking for check items in directory...
> rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 &
> op=21
> rlm_ldap: looking for reply items in directory...
> rlm_ldap: user testradius authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> modcall[authorize]: module "ldap" returns ok for request 3
> modcall: leaving group authorize (returns updated) for request 3
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 3
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> rlm_eap_tls: Received EAP-TLS ACK message
> rlm_eap_tls: ack handshake fragment handler
> eaptls_verify returned 1
> eaptls_process returned 13
> rlm_eap_peap: EAPTLS_HANDLED
> modcall[authenticate]: module "eap" returns handled for request 3
> modcall: leaving group authenticate (returns handled) for request 3
> Sending Access-Challenge of id 89 to 192.168.20.4 port 1645
> EAP-Message =
> 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
>
> EAP-Message =
> 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
>
> EAP-Message =
> 0x2a864886f70d010901161c616e746f6e696f2e6d6174657261406372656174652d6e65742e6974820900d6c51af184c17a13300c0603551d13040530030101ff300d06092a864886f70d0101050500038181009afe6349178f51966293fa52eafafe825e9441722f5f86ebb1e995589569640a40f04f3c969ea63173a875d9f055a0b19dc2c463a1c5de3a447dc04f369d5fb56fdff6bca5ef16e785a46f3646e062ac0c7cacc7cbfd163ccbb314bc66e8bbc68ac6d594e47d0cd76d66aec45508952892553bbe957973f8e6c5ac901f86881b16030100040e000000
>
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x6e149fab9e804ff893086dc63288956c
> Finished request 3
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.20.4:1645, id=90,
> length=375
> User-Name = "testradius"
> Framed-MTU = 1400
> Called-Station-Id = "0012.dacb.8420"
> Calling-Station-Id = "000c.f135.f1ba"
> Cisco-AVPair = "ssid=cn-test"
> Service-Type = Login-User
> Message-Authenticator = 0x2b8da6bb902efbb45870bfb4ee8d4721
> EAP-Message =
> 0x020500d01980000000c616030100861000008200809c9bc5e92e77cd8e43f601da17d92b70c3102f4177f73cdd2200af4fb429d2b9e6c89c04a11054b63541143bfd4df19f9abe4597ca56f06cf6384abce4342eb3c882515c6e7bd41c042390cb35f0a2e78023aecca90cdeb8ed53ce0329752e0dfbd145e0a60f5cde8b952f6b056f56fa50dfb9a09e09becd16790b8c5f5f744b1403010001011603010030493ada867a57f10f420cf922d875cd8252176dd386a93444f7db712fa0c130f2f6910c7d33f7d7d3639f8415ad40827b
>
> NAS-Port-Type = Wireless-802.11
> Cisco-NAS-Port = "289"
> NAS-Port = 289
> State = 0x6e149fab9e804ff893086dc63288956c
> NAS-IP-Address = 192.168.20.4
> NAS-Identifier = "ap"
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 4
> modcall[authorize]: module "preprocess" returns ok for request 4
> modcall[authorize]: module "mschap" returns noop for request 4
> rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 4
> rlm_eap: EAP packet type response id 5 length 208
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 4
> modcall[authorize]: module "files" returns notfound for request 4
> rlm_ldap: - authorize
> rlm_ldap: performing user authorization for testradius
> radius_xlat: '(uid=testradius)'
> radius_xlat: 'dc=create-net,dc=org'
> rlm_ldap: ldap_get_conn: Checking Id: 0
> rlm_ldap: ldap_get_conn: Got Id: 0
> rlm_ldap: performing search in dc=create-net,dc=org, with filter
> (uid=testradius)
> rlm_ldap: Added password testradius in check items
> rlm_ldap: looking for check items in directory...
> rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 &
> op=21
> rlm_ldap: looking for reply items in directory...
> rlm_ldap: user testradius authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> modcall[authorize]: module "ldap" returns ok for request 4
> modcall: leaving group authorize (returns updated) for request 4
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 4
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> rlm_eap_tls: Length Included
> eaptls_verify returned 11
> rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
> TLS_accept: SSLv3 read client key exchange A
> rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]
> rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished
> TLS_accept: SSLv3 read finished A
> rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]
> TLS_accept: SSLv3 write change cipher spec A
> rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished
> TLS_accept: SSLv3 write finished A
> TLS_accept: SSLv3 flush data
> (other): SSL negotiation finished successfully
> SSL Connection Established
> eaptls_process returned 13
> rlm_eap_peap: EAPTLS_HANDLED
> modcall[authenticate]: module "eap" returns handled for request 4
> modcall: leaving group authenticate (returns handled) for request 4
> Sending Access-Challenge of id 90 to 192.168.20.4 port 1645
> EAP-Message =
> 0x0106004119001403010001011603010030294ac923e9c7ee0c1317386255a5314fed93bdb0072dd4a1f17f415ae73c7fcf9cf766a41acbf5cfd2efb8c7175c7bcd
>
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x9ce29ff8d1c3357e90aed9aa66af7cca
> Finished request 4
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.20.4:1645, id=91,
> length=173
> User-Name = "testradius"
> Framed-MTU = 1400
> Called-Station-Id = "0012.dacb.8420"
> Calling-Station-Id = "000c.f135.f1ba"
> Cisco-AVPair = "ssid=cn-test"
> Service-Type = Login-User
> Message-Authenticator = 0x63027bb2608f1b908972d531373bde2e
> EAP-Message = 0x020600061900
> NAS-Port-Type = Wireless-802.11
> Cisco-NAS-Port = "289"
> NAS-Port = 289
> State = 0x9ce29ff8d1c3357e90aed9aa66af7cca
> NAS-IP-Address = 192.168.20.4
> NAS-Identifier = "ap"
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 5
> modcall[authorize]: module "preprocess" returns ok for request 5
> modcall[authorize]: module "mschap" returns noop for request 5
> rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 5
> rlm_eap: EAP packet type response id 6 length 6
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 5
> modcall[authorize]: module "files" returns notfound for request 5
> rlm_ldap: - authorize
> rlm_ldap: performing user authorization for testradius
> radius_xlat: '(uid=testradius)'
> radius_xlat: 'dc=create-net,dc=org'
> rlm_ldap: ldap_get_conn: Checking Id: 0
> rlm_ldap: ldap_get_conn: Got Id: 0
> rlm_ldap: performing search in dc=create-net,dc=org, with filter
> (uid=testradius)
> rlm_ldap: Added password testradius in check items
> rlm_ldap: looking for check items in directory...
> rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 &
> op=21
> rlm_ldap: looking for reply items in directory...
> rlm_ldap: user testradius authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> modcall[authorize]: module "ldap" returns ok for request 5
> modcall: leaving group authorize (returns updated) for request 5
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 5
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> rlm_eap_tls: Received EAP-TLS ACK message
> rlm_eap_tls: ack handshake is finished
> eaptls_verify returned 3
> eaptls_process returned 3
> rlm_eap_peap: EAPTLS_SUCCESS
> modcall[authenticate]: module "eap" returns handled for request 5
> modcall: leaving group authenticate (returns handled) for request 5
> Sending Access-Challenge of id 91 to 192.168.20.4 port 1645
> EAP-Message =
> 0x010700501900170301002028b8b716334e409d6941093bd92fde78c605f610518815d093df4b5de567bc481703010020aa5243bab5bb677ac1248b22a3c3469d1069bfbb38d31d829a3eaeb438d708a3
>
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xb7f85f0bfdaf582686c515bef2f8e139
> Finished request 5
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.20.4:1645, id=92,
> length=247
> User-Name = "testradius"
> Framed-MTU = 1400
> Called-Station-Id = "0012.dacb.8420"
> Calling-Station-Id = "000c.f135.f1ba"
> Cisco-AVPair = "ssid=cn-test"
> Service-Type = Login-User
> Message-Authenticator = 0xe6cf0d19621b9acd7ad16f3e000e0f57
> EAP-Message =
> 0x02070050190017030100209c304a7e5af6573629b8effb46b67e30c4770ead531f3d76451253ff5318efaa17030100207cf3dd4e003a6ec8108e24b8838364fd51eebb2e92459f76d33071a1bde600f7
>
> NAS-Port-Type = Wireless-802.11
> Cisco-NAS-Port = "289"
> NAS-Port = 289
> State = 0xb7f85f0bfdaf582686c515bef2f8e139
> NAS-IP-Address = 192.168.20.4
> NAS-Identifier = "ap"
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 6
> modcall[authorize]: module "preprocess" returns ok for request 6
> modcall[authorize]: module "mschap" returns noop for request 6
> rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 6
> rlm_eap: EAP packet type response id 7 length 80
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 6
> modcall[authorize]: module "files" returns notfound for request 6
> rlm_ldap: - authorize
> rlm_ldap: performing user authorization for testradius
> radius_xlat: '(uid=testradius)'
> radius_xlat: 'dc=create-net,dc=org'
> rlm_ldap: ldap_get_conn: Checking Id: 0
> rlm_ldap: ldap_get_conn: Got Id: 0
> rlm_ldap: performing search in dc=create-net,dc=org, with filter
> (uid=testradius)
> rlm_ldap: Added password testradius in check items
> rlm_ldap: looking for check items in directory...
> rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 &
> op=21
> rlm_ldap: looking for reply items in directory...
> rlm_ldap: user testradius authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> modcall[authorize]: module "ldap" returns ok for request 6
> modcall: leaving group authorize (returns updated) for request 6
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 6
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> eaptls_verify returned 7
> rlm_eap_tls: Done initial handshake
> eaptls_process returned 7
> rlm_eap_peap: EAPTLS_OK
> rlm_eap_peap: Session established. Decoding tunneled attributes.
> rlm_eap_peap: Identity - testradius
> rlm_eap_peap: Tunneled data is valid.
> PEAP: Got tunneled identity of testradius
> PEAP: Setting default EAP type for tunneled EAP session.
> PEAP: Setting User-Name to testradius
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 6
> modcall[authorize]: module "preprocess" returns ok for request 6
> modcall[authorize]: module "mschap" returns noop for request 6
> rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 6
> rlm_eap: EAP packet type response id 7 length 15
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 6
> modcall[authorize]: module "files" returns notfound for request 6
> rlm_ldap: - authorize
> rlm_ldap: performing user authorization for testradius
> radius_xlat: '(uid=testradius)'
> radius_xlat: 'dc=create-net,dc=org'
> rlm_ldap: ldap_get_conn: Checking Id: 0
> rlm_ldap: ldap_get_conn: Got Id: 0
> rlm_ldap: performing search in dc=create-net,dc=org, with filter
> (uid=testradius)
> rlm_ldap: Added password testradius in check items
> rlm_ldap: looking for check items in directory...
> rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 &
> op=21
> rlm_ldap: looking for reply items in directory...
> rlm_ldap: user testradius authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> modcall[authorize]: module "ldap" returns ok for request 6
> modcall: leaving group authorize (returns updated) for request 6
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 6
> rlm_eap: EAP Identity
> rlm_eap: processing type mschapv2
> rlm_eap_mschapv2: Issuing Challenge
> modcall[authenticate]: module "eap" returns handled for request 6
> modcall: leaving group authenticate (returns handled) for request 6
> PEAP: Got tunneled Access-Challenge
> modcall[authenticate]: module "eap" returns handled for request 6
> modcall: leaving group authenticate (returns handled) for request 6
> Sending Access-Challenge of id 92 to 192.168.20.4 port 1645
> EAP-Message =
> 0x01080070190017030100203d185202b13b4febb5cc464d0b36377b81c831095d55011f9b6421cd28f4a43217030100405c277680c403d05e9c33482b001a6bc8c0eb28e221aed09fa965843bf26d689bae1f84df2d3c276ce32be058a876a9ea89e779235df581de93d77bc360b5c50a
>
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x41c9a9d8a10b154234a868b611c49edd
> Finished request 6
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.20.4:1645, id=93,
> length=311
> User-Name = "testradius"
> Framed-MTU = 1400
> Called-Station-Id = "0012.dacb.8420"
> Calling-Station-Id = "000c.f135.f1ba"
> Cisco-AVPair = "ssid=cn-test"
> Service-Type = Login-User
> Message-Authenticator = 0x54dbe70cf63e03e9b0e87a7ffb56f620
> EAP-Message =
> 0x0208009019001703010020d57d28136594254ec829db59670b1142027f032a88e0ab4e339392d13036f97b170301006058d5a177e8bbd8b16da599810d51ee4032d4c9ffe4dc11c97015c32331df8aca4b8fb339af0377eafce00e7ee23dd7f3cf984d6af8a5a71162f3daecec2f1654852e1ecfec560aee33cb22c72b7a31d394456d9e1508051c75b1498e234182b7
>
> NAS-Port-Type = Wireless-802.11
> Cisco-NAS-Port = "289"
> NAS-Port = 289
> State = 0x41c9a9d8a10b154234a868b611c49edd
> NAS-IP-Address = 192.168.20.4
> NAS-Identifier = "ap"
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 7
> modcall[authorize]: module "preprocess" returns ok for request 7
> modcall[authorize]: module "mschap" returns noop for request 7
> rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 7
> rlm_eap: EAP packet type response id 8 length 144
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 7
> modcall[authorize]: module "files" returns notfound for request 7
> rlm_ldap: - authorize
> rlm_ldap: performing user authorization for testradius
> radius_xlat: '(uid=testradius)'
> radius_xlat: 'dc=create-net,dc=org'
> rlm_ldap: ldap_get_conn: Checking Id: 0
> rlm_ldap: ldap_get_conn: Got Id: 0
> rlm_ldap: performing search in dc=create-net,dc=org, with filter
> (uid=testradius)
> rlm_ldap: Added password testradius in check items
> rlm_ldap: looking for check items in directory...
> rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 &
> op=21
> rlm_ldap: looking for reply items in directory...
> rlm_ldap: user testradius authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> modcall[authorize]: module "ldap" returns ok for request 7
> modcall: leaving group authorize (returns updated) for request 7
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 7
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> eaptls_verify returned 7
> rlm_eap_tls: Done initial handshake
> eaptls_process returned 7
> rlm_eap_peap: EAPTLS_OK
> rlm_eap_peap: Session established. Decoding tunneled attributes.
> rlm_eap_peap: EAP type mschapv2
> rlm_eap_peap: Tunneled data is valid.
> PEAP: Setting User-Name to testradius
> PEAP: Adding old state with 0e 6d
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 7
> modcall[authorize]: module "preprocess" returns ok for request 7
> modcall[authorize]: module "mschap" returns noop for request 7
> rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 7
> rlm_eap: EAP packet type response id 8 length 69
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 7
> modcall[authorize]: module "files" returns notfound for request 7
> rlm_ldap: - authorize
> rlm_ldap: performing user authorization for testradius
> radius_xlat: '(uid=testradius)'
> radius_xlat: 'dc=create-net,dc=org'
> rlm_ldap: ldap_get_conn: Checking Id: 0
> rlm_ldap: ldap_get_conn: Got Id: 0
> rlm_ldap: performing search in dc=create-net,dc=org, with filter
> (uid=testradius)
> rlm_ldap: Added password testradius in check items
> rlm_ldap: looking for check items in directory...
> rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 &
> op=21
> rlm_ldap: looking for reply items in directory...
> rlm_ldap: user testradius authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> modcall[authorize]: module "ldap" returns ok for request 7
> modcall: leaving group authorize (returns updated) for request 7
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 7
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/mschapv2
> rlm_eap: processing type mschapv2
> Processing the authenticate section of radiusd.conf
> modcall: entering group MS-CHAP for request 7
> rlm_mschap: Told to do MS-CHAPv2 for testradius with NT-Password
> rlm_mschap: adding MS-CHAPv2 MPPE keys
> modcall[authenticate]: module "mschap" returns ok for request 7
> modcall: leaving group MS-CHAP (returns ok) for request 7
> MSCHAP Success
> modcall[authenticate]: module "eap" returns handled for request 7
> modcall: leaving group authenticate (returns handled) for request 7
> PEAP: Got tunneled Access-Challenge
> modcall[authenticate]: module "eap" returns handled for request 7
> modcall: leaving group authenticate (returns handled) for request 7
> Sending Access-Challenge of id 93 to 192.168.20.4 port 1645
> EAP-Message =
> 0x010900801900170301002008739fac8dfedd4813968370d0fc326c59a8e74d8db02be5127a4de5e1f8697b17030100509bc8996b8c9173e78fc71777ec3bd5d4865b28c1d637047803876e08e95d1cbaaab70917fdbdae3691e9b6ec36edcedd48cd74607e54dc80aefc5bb87474fc1740d64e3b3db8bc8a6f0846bea8659ceb
>
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xe242737767a1d4a377058568d102c376
> Finished request 7
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.20.4:1645, id=94,
> length=247
> User-Name = "testradius"
> Framed-MTU = 1400
> Called-Station-Id = "0012.dacb.8420"
> Calling-Station-Id = "000c.f135.f1ba"
> Cisco-AVPair = "ssid=cn-test"
> Service-Type = Login-User
> Message-Authenticator = 0xa84673f1253b4bb56d4067a2ee5a6007
> EAP-Message =
> 0x0209005019001703010020b0205b783726a7e63c0dfbbc6e32dc9bf96f59dc53e711f8f5245fa3a767ca95170301002007f2dbd650ad2653a4b49a3006c8c7d977fd18e395d41732719fc83739aeedbe
>
> NAS-Port-Type = Wireless-802.11
> Cisco-NAS-Port = "289"
> NAS-Port = 289
> State = 0xe242737767a1d4a377058568d102c376
> NAS-IP-Address = 192.168.20.4
> NAS-Identifier = "ap"
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 8
> modcall[authorize]: module "preprocess" returns ok for request 8
> modcall[authorize]: module "mschap" returns noop for request 8
> rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 8
> rlm_eap: EAP packet type response id 9 length 80
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 8
> modcall[authorize]: module "files" returns notfound for request 8
> rlm_ldap: - authorize
> rlm_ldap: performing user authorization for testradius
> radius_xlat: '(uid=testradius)'
> radius_xlat: 'dc=create-net,dc=org'
> rlm_ldap: ldap_get_conn: Checking Id: 0
> rlm_ldap: ldap_get_conn: Got Id: 0
> rlm_ldap: performing search in dc=create-net,dc=org, with filter
> (uid=testradius)
> rlm_ldap: Added password testradius in check items
> rlm_ldap: looking for check items in directory...
> rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 &
> op=21
> rlm_ldap: looking for reply items in directory...
> rlm_ldap: user testradius authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> modcall[authorize]: module "ldap" returns ok for request 8
> modcall: leaving group authorize (returns updated) for request 8
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 8
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> eaptls_verify returned 7
> rlm_eap_tls: Done initial handshake
> eaptls_process returned 7
> rlm_eap_peap: EAPTLS_OK
> rlm_eap_peap: Session established. Decoding tunneled attributes.
> rlm_eap_peap: EAP type mschapv2
> rlm_eap_peap: Tunneled data is valid.
> PEAP: Setting User-Name to testradius
> PEAP: Adding old state with 34 97
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 8
> modcall[authorize]: module "preprocess" returns ok for request 8
> modcall[authorize]: module "mschap" returns noop for request 8
> rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 8
> rlm_eap: EAP packet type response id 9 length 6
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 8
> modcall[authorize]: module "files" returns notfound for request 8
> rlm_ldap: - authorize
> rlm_ldap: performing user authorization for testradius
> radius_xlat: '(uid=testradius)'
> radius_xlat: 'dc=create-net,dc=org'
> rlm_ldap: ldap_get_conn: Checking Id: 0
> rlm_ldap: ldap_get_conn: Got Id: 0
> rlm_ldap: performing search in dc=create-net,dc=org, with filter
> (uid=testradius)
> rlm_ldap: Added password testradius in check items
> rlm_ldap: looking for check items in directory...
> rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 &
> op=21
> rlm_ldap: looking for reply items in directory...
> rlm_ldap: user testradius authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> modcall[authorize]: module "ldap" returns ok for request 8
> modcall: leaving group authorize (returns updated) for request 8
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 8
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/mschapv2
> rlm_eap: processing type mschapv2
> rlm_eap: Freeing handler
> modcall[authenticate]: module "eap" returns ok for request 8
> modcall: leaving group authenticate (returns ok) for request 8
> Login OK: [testradius/<no User-Password attribute>] (from client
> cn-radius port 289 cli 000c.f135.f1ba)
> PEAP: Tunneled authentication was successful.
> rlm_eap_peap: SUCCESS
> modcall[authenticate]: module "eap" returns handled for request 8
> modcall: leaving group authenticate (returns handled) for request 8
> Sending Access-Challenge of id 94 to 192.168.20.4 port 1645
> EAP-Message =
> 0x010a005019001703010020dc74f623a748e6c82d95b4dc908f8831d572ebf662ebe3287f774a191d83c25717030100202b4207d67864ce764fe7fe0d17c29afc6da54a36fe11e961edde3c4f01ac4505
>
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xafb670111e339beb53b8dcaa76cbe11c
> Finished request 8
> Going to the next request
> Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 192.168.20.4:1645, id=95,
> length=247
> User-Name = "testradius"
> Framed-MTU = 1400
> Called-Station-Id = "0012.dacb.8420"
> Calling-Station-Id = "000c.f135.f1ba"
> Cisco-AVPair = "ssid=cn-test"
> Service-Type = Login-User
> Message-Authenticator = 0xc45e189222dd876003933eb16e724bc4
> EAP-Message =
> 0x020a005019001703010020a740106e429d51742e3dfe82eeb24d4df3511b9f061d8bc0ccd297532bb6fd29170301002001e0cc2468fcaa795254710a0a7ad1ed8d2e7e3d27727e8501f87739b9ee017c
>
> NAS-Port-Type = Wireless-802.11
> Cisco-NAS-Port = "289"
> NAS-Port = 289
> State = 0xafb670111e339beb53b8dcaa76cbe11c
> NAS-IP-Address = 192.168.20.4
> NAS-Identifier = "ap"
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 9
> modcall[authorize]: module "preprocess" returns ok for request 9
> modcall[authorize]: module "mschap" returns noop for request 9
> rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 9
> rlm_eap: EAP packet type response id 10 length 80
> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> modcall[authorize]: module "eap" returns updated for request 9
> modcall[authorize]: module "files" returns notfound for request 9
> rlm_ldap: - authorize
> rlm_ldap: performing user authorization for testradius
> radius_xlat: '(uid=testradius)'
> radius_xlat: 'dc=create-net,dc=org'
> rlm_ldap: ldap_get_conn: Checking Id: 0
> rlm_ldap: ldap_get_conn: Got Id: 0
> rlm_ldap: performing search in dc=create-net,dc=org, with filter
> (uid=testradius)
> rlm_ldap: Added password testradius in check items
> rlm_ldap: looking for check items in directory...
> rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 &
> op=21
> rlm_ldap: looking for reply items in directory...
> rlm_ldap: user testradius authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> modcall[authorize]: module "ldap" returns ok for request 9
> modcall: leaving group authorize (returns updated) for request 9
> rad_check_password: Found Auth-Type EAP
> auth: type "EAP"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 9
> rlm_eap: Request found, released from the list
> rlm_eap: EAP/peap
> rlm_eap: processing type peap
> rlm_eap_peap: Authenticate
> rlm_eap_tls: processing TLS
> eaptls_verify returned 7
> rlm_eap_tls: Done initial handshake
> eaptls_process returned 7
> rlm_eap_peap: EAPTLS_OK
> rlm_eap_peap: Session established. Decoding tunneled attributes.
> rlm_eap_peap: Received EAP-TLV response.
> rlm_eap_peap: Tunneled data is valid.
> rlm_eap_peap: Success
> rlm_eap: Freeing handler
> modcall[authenticate]: module "eap" returns ok for request 9
> modcall: leaving group authenticate (returns ok) for request 9
> Login OK: [testradius/<no User-Password attribute>] (from client
> ap-test-ivan port 289 cli 000c.f135.f1ba)
> Sending Access-Accept of id 95 to 192.168.20.4 port 1645
> MS-MPPE-Recv-Key =
> 0x0b16dbbed96d2863ebde1df32222e6a8930a6876e2ae7e2c85288ae313d2cdc1
> MS-MPPE-Send-Key =
> 0x429669acf3e571f6fb7b6fbce51ef9bbb8cd9678885f5c52ab5355ce43727c9c
> EAP-Message = 0x030a0004
> Message-Authenticator = 0x00000000000000000000000000000000
> User-Name = "testradius"
> Finished request 9
> Going to the next request
> Waking up in 6 seconds...
More information about the Freeradius-Users
mailing list