Fwd: freeradius cannot find the rlm_sql module

Abul Monsur Mannan monsurc1 at gmail.com
Fri May 19 04:27:26 CEST 2006


---------- Forwarded message ----------
From: Abul Monsur Mannan <monsurc1 at gmail.com>
Date: May 19, 2006 3:28 AM
Subject: freeradius cannot find the rlm_sql module
To: freeradius-users at lists.freeradius.org


---------- Forwarded message ----------
From: Abul Monsur Mannan <monsurc1 at gmail.com>
Date: May 19, 2006 2:47 AM
Subject: freeradius cannot find the rlm_sql module
To: "cknipe at savage.za.org" <cknipe at savage.za.org>


Hi fr users,

I setup Freeradius and mysql again.Actually, at earlier try I ran the
server with the command radiusd -X successfuly but now i found the
output here ----

[root at badal freeradius-1.1.1]# radiusd -X
Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /usr/local/etc/raddb/proxy.conf
Config:   including file: /usr/local/etc/raddb/clients.conf
Config:   including file: /usr/local/etc/raddb/snmp.conf
Config:   including file: /usr/local/etc/raddb/eap.conf
Config:   including file: /usr/local/etc/raddb/sql.conf
 main: prefix = "/usr/local"
 main: localstatedir = "/usr/local/var"
 main: logdir = "/usr/local/var/log/radius"
 main: libdir = "/usr/local/lib"
 main: radacctdir = "/usr/local/var/log/radius/radacct"
 main: hostname_lookups = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 0
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/usr/local/var/log/radius/radius.log"
 main: log_auth = no
 main: log_auth_badpass = no
 main: log_auth_goodpass = no
 main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
 main: user = "(null)"
 main: group = "(null)"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/local/sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = no
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
 pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = no
 mschap: passwd = "(null)"
 mschap: authtype = "MS-CHAP"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "/etc/shadow"
 unix: group = "(null)"
 unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
 eap: default_eap_type = "md5"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
 preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
 preprocess: hints = "/usr/local/etc/raddb/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
 files: usersfile = "/usr/local/etc/raddb/users"
 files: acctusersfile = "/usr/local/etc/raddb/acct_users"
 files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files)
Module: Loaded SQL
 sql: driver = "rlm_sql_mysql"
 sql: server = "localhost"
 sql: port = ""
 sql: login = "raduser"
 sql: password = "radpass"
 sql: radius_db = "testdb"
 sql: acct_table = "radacct"
 sql: acct_table2 = "radacct"
 sql: authcheck_table = "radcheck"
 sql: authreply_table = "radreply"
 sql: groupcheck_table = "radgroupcheck"
 sql: groupreply_table = "radgroupreply"
 sql: usergroup_table = "usergroup"
 sql: nas_table = "nas"
 sql: dict_table = "dictionary"
 sql: sqltrace = no
 sql: sqltracefile = "/usr/local/var/log/radius/sqltrace.sql"
 sql: readclients = no
 sql: deletestalesessions = yes
 sql: num_sql_socks = 5
 sql: sql_user_name = "%{User-Name}"
 sql: default_user_profile = ""
 sql: query_on_not_found = no
 sql: authorize_check_query = "SELECT id, UserName, Attribute, Value,
op           FROM radcheck           WHERE Username =
'%{SQL-User-Name}'           ORDER BY id"
 sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value,
op           FROM radreply           WHERE Username =
'%{SQL-User-Name}'           ORDER BY id"
 sql: authorize_group_check_query = "SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
 FROM radgroupcheck,usergroup WHERE usergroup.Username =
'%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName
ORDER BY radgroupcheck.id"
 sql: authorize_group_reply_query = "SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
 FROM radgroupreply,usergroup WHERE usergroup.Username =
'%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName
ORDER BY radgroupreply.id"
 sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S',
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime),
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
 sql: accounting_update_query = "UPDATE radacct           SET
FramedIPAddress = '%{Framed-IP-Address}',           AcctSessionTime =
'%{Acct-Session-Time}',           AcctInputOctets =
'%{Acct-Input-Octets}',           AcctOutputOctets =
'%{Acct-Output-Octets}'           WHERE AcctSessionId =
'%{Acct-Session-Id}'           AND UserName = '%{SQL-User-Name}'
  AND NASIPAddress= '%{NAS-IP-Address}'"
 sql: accounting_update_query_alt = "INSERT into radacct
(AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress,
NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId,
CallingStationId, ServiceType, FramedProtocol, FramedIPAddress,
AcctStartDelay) values('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}',
DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} +
%{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}',
'%{Acct-Authentic}', '', '%{Acct-Input-Octets}',
'%{Acct-Output-Octets}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '0')"
 sql: accounting_start_query = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets,
AcctOutputOctets, CalledStationId, CallingStationId,
AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress,
AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0',
'0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '',
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
'%{Acct-Delay-Time}', '0')"
 sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime =
'%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start =
'%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND
UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
 sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S',
AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets =
'%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}',
AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE
AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}'
AND NASIPAddress = '%{NAS-IP-Address}'"
 sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets,
AcctOutputOctets, CalledStationId, CallingStationId,
AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress,
AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S',
INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND),
'%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '',
'%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}',
'%{Called-Station-Id}', '%{Calling-Station-Id}',
'%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
 sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE
UserName='%{SQL-User-Name}'"
 sql: connect_failure_retry_delay = 60
 sql: simul_count_query = ""
 sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName,
NASIPAddress, NASPortId, FramedIPAddress, CallingStationId,
FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND
AcctStopTime = 0"
 sql: postauth_table = "radpostauth"
 sql: postauth_query = "INSERT into radpostauth (id, user, pass,
reply, date) values ('', '%{User-Name}',
'%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', NOW())"
 sql: safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
rlm_sql (sql): Could not link driver rlm_sql_mysql: rlm_sql_mysql.so:
cannot open shared object file: No such file or directory
rlm_sql (sql): Make sure it (and all its dependent libraries!) are in
the search path of your system's ld.
radiusd.conf[14]: sql: Module instantiation failed.
radiusd.conf[1798] Unknown module "sql".
radiusd.conf[1727] Failed to parse authorize section.


************************************************************

1)I've -
config.cache  config.h.in  config.status  configure.in  Makefile.in
config.h      config.log   configure      Makefile      sql_mysql.c

in --
 /usr/local/src/freeradius-1.1.1/src/modules/rlm_sql/drivers/rlm_sql_mysql


2)When I create database I copy the mysql.sql database schema from
/usr/local/src/freeradius-1.1.1/doc/examples/mysql.sql


3)And I did manage the sql.conf and radiusd.conf as directed by
internet sources.


>>>Q:Where can I find the log files of freeradius nad mysql?

Hope someone helpfull to me.

Thank U.

On 5/16/06, Abul Monsur Mannan <monsurc1 at gmail.com> wrote:
> Many thanks for quick reply.I'll do and try then must inform U about the result.
>
> Thanks again.
>
> On 5/16/06, cknipe at savage.za.org <cknipe at savage.za.org> wrote:
> > Quoting Abul Monsur Mannan <monsurc1 at gmail.com>:
> >
> > > how can I configure freeradius to accept request from mysql ? I'm
> > > using Freeradius1.1.1 on Redhat Enterprise4.Should I populate the
> > > tables 'redrely' as well as 'redgroup' with others?
> >
> > You need to populate all the tables except accounting with the correct
> > information.  Spend 10 minutes on google and search for a freeradius+mysql
> > tutorial, there's plenty arround explaining what goes in what tables, with
> > examples etc.
> >
> > --
> > Chris
> >
> >
> >
> >
>




More information about the Freeradius-Users mailing list